







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Coral Gables Owner’s Guide
When a Therma-Tru entry system or sidelight unit sits at the head of a driveway, the pavers and the door are on the same exposed surface, sharing the same rain, sun, and root pressure. Paver driveway installation in Coral Gables typically runs $7,000 – $18,000, and a paver patio runs $3,500 – $11,000. We install Therma-Tru-compatible hardscape and door surrounds to spec, and we pull the permits and schedule the inspection. Because this work needs site measurement and order lead time, it’s planned, not dispatched: call (833) 510-5367 and we’ll get your written estimate on the calendar.
Owners usually find the problem after a storm, not before. Water sheets toward a Therma-Tru threshold that used to sit high and dry, and the door starts dragging or the sweep starts weeping. Sometimes it’s a paver that rocks underfoot and lets sand wash out from under the door landing. Or a hairline crack opens along the joint where the driveway meets the stoop, and every heavy rain pushes water back at the frame and lower hinge. In Coral Gables, the limestone underneath much of the city drains fast until it doesn’t, and once the base under a paver softens, the settling shows up right at the door.
Which Therma-Tru Models This Applies To

Therma-Tru entry doors, sidelights, and transom units all land at grade on a threshold, and that threshold is only as reliable as the hardscape beneath it. The relevant lines come in Fiber-Classic, Smooth-Star, and the fiberglass and steel systems with adjustable sills, plus the composite frames that sit at the door opening. The part isn’t sold by door model number, though. It’s specified from the opening.
To identify what you actually have, look for three things. First, the Therma-Tru label on the door edge or jamb carries a series and finish designation, and that tells us door thickness and sill type. Second, measure the rough opening left to right and top to bottom, not the door slab. Third, note the sill height above the driveway surface. That last number is the one most Coral Gables installs get wrong, because a sill set flush or below the paver field is what lets water track back under the threshold.
On parts, OEM Therma-Tru sills, sweeps, and threshold adjusters are exact-fit and come with the manufacturer’s warranty, which is what we document on the spec sheet. Quality aftermarket equivalents exist and save money, but the fit has to be verified against the actual frame, not assumed from the model year. We work from the measured opening every time, and we specify against Belgard and Unilock hardscape lines where the driveway and the door surround are being rebuilt together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
- The door drags or won’t latch come rainy season. That’s usually a paver or stoop settling under the threshold, dropping the frame and putting the door out of plumb. It looks like a door problem and is often a hardscape problem.
- Water pools against the threshold after a storm. Coral Gables sits low and the drainage grade matters more here than in most of Miami-Dade. When the driveway slope flattens out or pavers heave, the door becomes the low point.
- Pavers rock, sink, or sand washes out at joints. The bedding sand has migrated or the base wasn’t compacted thick enough. Left alone, the settling reaches the door landing and the frame.
- The threshold or sill is cracked, chipped, or gaps at the edges. UV and salt air age the sealant and the sill composite, and once a gap opens, wind-driven rain gets past the sweep.
- A hairline crack runs from the driveway to the stoop. Small cracks let water under the base and, in Coral Gables, tree roots from the live oaks common on the older streets push pavers up near the door.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the Coral Gables pricing in writing, before any work starts. The driveway-and-door landing work prices like this:
| Work | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
The range moves with square footage, base depth, how much of the existing driveway gets removed, drainage regrading, and whether the stoop or landing at the Therma-Tru door is being rebuilt to raise the sill. Labor is itemized against materials so you see the split. Every completed job carries the 365-Day Done Right Promise: a written guarantee, and if the work fails inside that full year, we return and correct it at no charge. No change orders at the door.
DIY or Call Us?
What you can safely check: walk the driveway after rain and mark where water stands, look for rocking pavers near the door, and confirm the sill sits above the paver surface by at least a quarter inch. That’s inspection, not repair, and it’s useful information to have on hand. Sealing is also low-risk and priced at $250 – $700 if you want to try it.
Where it goes wrong is the base. Rebuilding a paver field under a door landing means removing and resetting the threshold, recompacting the base to depth, and regrading drainage so water leaves the door. Do it shallow and the settling comes back within a season, taking the door frame with it. On a Coral Gables property, the grade and drainage also run into permit requirements for flatwork and site changes. If the door is dragging or water is pooling at the threshold, call (833) 510-5367. We’ll tell you what’s actually wrong and put a written number on it.
FAQs

A properly based paver driveway lasts 25 – 30 years, but the base is what shortens that in South Florida: heavy rain, tree roots, and shallow compaction cut it to 10 – 15 years. Sealing every few years at $250 – $700 helps, but it won’t fix a base that was laid too thin. Call (833) 510-5367 for a written estimate on the base rebuild.
Can the failed asphalt
Often yes. If the settling is localized near the door, we can lift, reset, and recompact that section and regrade the slope rather than tear out the whole driveway. Driveway sealing at $250 – $700 is the low-cost first step. Once more than a third of the field is rocking or the base is gone, replacement at $5,000 – $14,000 becomes the honest answer. Call (833) 510-5367 to find out which one you’re looking at.
A driveway sealing takes an afternoon. A paver landing rebuild or localized reset near the Therma-Tru door is typically a day or two. A full paver driveway replacement at $7,000 – $18,000 runs several days once we account for removal, base, drainage, and the inspection. We put the schedule in the written scope before we start. Call (833) 510-5367 for your estimate.
We specify OEM Therma-Tru sills, sweeps, and adjusters against the measured opening, or a verified aftermarket equivalent when the budget calls for it, and we document which one is going in on the spec sheet. Sourcing from the model label alone is how mismatched parts end up on the wrong frame. Every order is confirmed by measurement first. Call (833) 510-5367 and we’ll walk your opening and price it in writing. We also work with KraftMaid, Cambria, and Silestone on related interior projects, though this page covers Therma-Tru hardscape and door-landing work only.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












