







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Coral Gables Owner’s Guide
Fence installation tied to a Therma-Tru entry system in Coral Gables typically runs $3,500 to $9,000 installed, depending on run length, material, and how the fence ties into your gate and door frame. We schedule these as planned work, not emergency calls, so you get a written price before anything starts. Most owners discover a problem the same way: the gate drags, the post near the Therma-Tru doorframe starts to lean after a wet season, or the fence line pulls away from the house and leaves a gap where the door meets the yard. In Coral Gables, that combination of salt air, heavy summer rain, and root-heavy lots finds weak posts and cheap fasteners first.
Which Therma-Tru Models This Applies To

Therma-Tru builds doors, sidelights, and entry systems, not fences. What we install is the fence and gate assembly that runs alongside and ties into a Therma-Tru entry, so the framing, gate hardware, and post placement have to line up with the door’s rough opening and threshold. That means the “model” question matters on the door side, not the fence side. Look for the Therma-Tru label on the door edge or hinge jamb, which gives you the series and slab size. Measure the rough opening, not the visible door, so the gate post clears the frame and the sidelight.
On the fence itself, the decision is OEM versus quality aftermarket. Therma-Tru doesn’t make fence panels, so we match the fence material and gate hardware to the door’s finish and trim, then source components with published manufacturer specs. We don’t carry parts on a truck and we don’t claim stock. Coral Gables homes often sit on lots with mature ficus and oak roots, so post spacing and footing depth get adjusted to the actual soil, not a template. If your entry also uses KraftMaid cabinetry inside or Cambria and Silestone surfaces nearby, we keep the exterior spec sheet consistent with the interior brands on file.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
Fence problems show up at the connections first. Here’s what we see and why it happens.
- The gate drags or won’t latch. Posts have shifted from soil movement or a footing set too shallow for Coral Gables’ sandy fill, so the gate frame is out of square.
- Posts lean after heavy rain. Water pools at the base because the footing wasn’t crowned or drained, and the wood or vinyl post wicks moisture and rots at grade.
- A gap opens between the fence and the house. The fence wasn’t tied to the Therma-Tru frame with proper brackets, so seasonal movement pulls the run away from the door.
- Rust streaks on gate hinges and latches. Salt air in Coral Gables eats cheap galvanized hardware fast; stainless or coated hardware lasts years longer.
- Panels sag or rack out of level. Fasteners backed out of soft pressure-treated lumber, or the panels were nailed instead of screwed, so the run loses its line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Coral Gables runs $3,500 to $9,000 for a typical residential run. The range depends on linear feet, material (vinyl, aluminum, or wood), gate count, and how much site prep the footings need. A short run with one gate sits near the low end; a long perimeter with multiple gates, root removal, and a custom tie-in to a Therma-Tru entry pushes toward the top.
Every quote is line-item and written before work starts: demo and haul-away, footings, posts, panels, gate hardware, and the tie-in at the door. No number moves at the door. The work carries our 365-Day Done Right Promise: if something fails within a year, we come back and correct it at no charge. Call (833) 510-5367 for an exact quote; estimates are free.
DIY or Call Us?
You can safely check a few things yourself: confirm the Therma-Tru label and slab size on the door, measure the run and gate widths, and note where posts lean or the fence pulls away from the house. Photograph the gaps and hardware. That’s where DIY stops being worth it. Setting footings to the right depth, squaring a gate to a doorframe, and tying a fence to an entry without stressing the frame is a two-person job with real consequences if it’s wrong. A gate that drops or a fence that pulls away can damage the Therma-Tru frame and cost more to fix than the original install.
Our technicians have up to 22 years of experience, and we work with a documented roster of name-brand materials so specifications stay traceable. Call (833) 510-5367 and we’ll give you a written price before any work starts.
FAQs

How long does a Therma-Tru-compatible fence installation last in Coral Gables? A properly set fence with stainless or coated hardware lasts roughly 15 to 20 years for vinyl or aluminum, and 8 to 12 for wood in this climate. Salt air and heavy rain shorten the life of cheap fasteners first, so hardware quality matters more than the panel brand.
Can it be repaired instead of replaced? Often, yes. A leaning post, a dragging gate, or a gap at the door can sometimes be reset or re-braced. The honest answer depends on whether the footing has failed; if it has, replacement is the real fix. Call (833) 510-5367 and we’ll tell you which one you’re looking at.
How long does the swap take? A typical residential run takes one to three days, depending on length, gate count, and footing conditions. We give you the timeline in the written quote, not a guess at the door.
How do you source the part? We match fence material and gate hardware to your Therma-Tru door’s finish and rough opening, then source components with published manufacturer specs. We don’t claim to stock parts or carry them on a truck; we order what the job needs and confirm it before the install date.
Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Therma-Tru. When you’re ready for a straight number on fence installation, call (833) 510-5367 for a free estimate. A live person answers 24 hours a day, seven days a week, and every project comes with a written price before work begins and our 365-Day Done Right Promise behind it.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












