A Bradford company - serving Coral Gables, FL
An open living room and dining area after a whole-home remodel
T
Therma-Tru · Coral Gables

Therma-Tru Roofing in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Roofing: The Coral Gables Owner’s Guide

We install Therma-Tru doors and door systems and service the roofing details that surround them, but we want to be precise with you up front: Therma-Tru is a door and entryway manufacturer, not a roofing brand. There’s no such thing as a Therma-Tru roof. What Coral Gables homeowners call “Therma-Tru roofing” is almost always the flashing, sill pan, or door-surround weatherproofing that ties a Therma-Tru entry door into the roof and wall above it, or the head flashing on a Therma-Tru patio or French door. Those details fail more often than the door itself in South Florida’s rain, and replacing them typically runs anywhere from a small repair in the low hundreds up to a full roof-section repair in the $400 to $1,800 range, depending on how much water damage walked in behind the leak.

Call (833) 510-5367

Here’s how owners find us. A brown ring spreads across the ceiling near a door frame after an afternoon storm. The interior casing feels soft. Water pools on the threshold during a driving rain and the door sill starts to swell. Almost nobody notices the leak the day it starts, because the flashing behind the trim is out of sight until the drywall tells the story.

Which Therma-Tru Models This Applies To

A finished basement family room with a media wall and wet bar

The flashing and weatherproofing details we’re talking about apply to any Therma-Tru door set in a wall that meets a roof plane, a soffit, or an overhang. That includes entry doors, patio and French doors, sidelite and transom assemblies, and multi-panel door walls. The door series itself (Smooth-Star, Fiber-Classic, or any of the Therma-Tru exterior collections) doesn’t change the flashing approach as much as the rough opening does. What matters is the width of the door unit, whether it carries sidelites, and how the head and jambs meet the roof pitch above.

To identify your door, look for the Therma-Tru label on the door slab edge or the frame. It gives you the model and the size. Measure the rough opening too, because a replacement door from any line has to match that opening, not just the visible slab. On the OEM-versus-aftermarket question at Coral Gables homes: Therma-Tru flashing kits, sill pans, and head flashing accessories are designed to work together, so if the door is staying, we source Therma-Tru-compatible parts where they exist and a matching-profile weatherproofing assembly where they don’t. We don’t claim to stock parts or carry them on a truck. We measure and source to your door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Roofing Is Failing

  • Water staining on the ceiling or header above the door. The head flashing or the roof-to-wall tie-in has opened up, and rain is tracking behind the trim. This is the most common first symptom we see.
  • Soft or swollen door jambs and casing. Moisture has been sitting against the frame long enough to soak the wood. Jamb rot means the flashing has been leaking for months, not days.
  • Daylight visible around the door’s top corners. The gap lets in wind-driven rain, and Coral Gables storms push water sideways from surprising angles. A gap here is a flashing failure, not just weatherstripping.
  • Water pooling on the threshold or staining the sill pan. The sill pan is either cracked, pitched the wrong way, or missing, so water sits instead of draining. Sills that stay wet rot the door base and eventually the floor.
  • Peeling paint or bubbling stucco on the wall above the door. Stucco and paint trap moisture against the sheathing. Bubbling here usually means the flashing behind it has failed and the substrate is damp.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

Therma-Tru flashing and door-surround repair in Coral Gables runs roughly $400 to $1,800 for a focused repair, and a broader roof-section repair where the leak has spread sits in that same $400 to $1,800 roof repair band. A full roof replacement, if the damage is too widespread to patch around the door, runs $8,000 to $20,000. Tile roof repair specifically, common on Coral Gables homes with clay or barrel tile, lands at $600 to $2,500.

What drives the range: how much sheathing has to be cut out and replaced, whether the door unit has to come out to get to the flashing, access to the roof plane above the door, and whether the roof covering is tile, shingle, or metal. Our written price before any work starts itemizes parts, labor, and any structural repair separately, so nothing moves at the door. Every completed repair carries our 365-Day Done Right Promise: if the work fails inside that full year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself. Look for the Therma-Tru label, photograph it, and note any staining or soft spots around the door. Probe gently with a screwdriver where the paint bubbles. None of that work is dangerous.

Where it goes wrong is the flashing itself. Getting the head flashing, sill pan, and roof-to-wall tie-in right requires removing trim and sometimes roofing coverage, matching the existing roof covering’s profile, and re-sealing so the assembly sheds water instead of trapping it. A homeowner with a tube of caulk usually pushes water deeper and hides the leak until the sheathing rots. On Coral Gables roofs, where afternoon rain is heavy and sideways, a flashing shortcut shows up within one summer. This is where a trained professional earns the call. Call (833) 510-5367 and we’ll send someone out to read the assembly before anyone starts cutting.

FAQs

A garage converted into a guest room and home office

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A stone counter, tile backsplash and open shelf after a kitchen remodelNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA wood double vanity with two mirrors after a bathroom remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch