







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Coral Gables Owner’s Guide
We build and finish Mr-Glass-compatible home additions and ADUs in Coral Gables, and a full addition typically runs $45,000 to $130,000 installed, with a detached or garage-mounted accessory unit running $90,000 to $220,000. That price includes the written scope and the 365-Day Done Right Promise we put in your hand at close.
Owners usually find a problem the same way: a hairline crack in the stucco where the addition meets the original wall, a soft spot in the floor near a new doorway, or a window that sticks every time the afternoon storms roll through. In Coral Gables, the tell is almost always water. The city sits on porous limestone with a high water table, so a slab or footer that wasn’t tied to the existing structure correctly shows movement within a season or two. We’re an independent contractor and not affiliated with Mr-Glass; we work to the manufacturer’s specs on every component we set.
Which Mr-Glass Models This Applies To

Mr-Glass builds its addition and ADU components around a small number of systems: modular wall panels, impact-rated glazing units, connector and anchor hardware, and the door and window assemblies that tie the new structure to the original house. The panel and glazing lines are where model numbers actually matter. If you’re matching a replacement panel or window unit, pull the label from the frame jamb or the inside face of the panel itself. That label carries the series code, the panel dimensions, and the impact rating. A photo of it is worth more than any measurement you can take with a tape.
On the OEM-versus-aftermarket question, here’s the honest split. Structural connectors, anchors, and any impact-rated glazing should be OEM or a documented equivalent that meets the same Florida Product Approval number. The approval is what your inspector checks. Cosmetic trim, interior casing, and non-structural panels can come from a quality aftermarket source and you’ll never know the difference. What you don’t want is a “close enough” anchor. Coral Gables sits in the high-velocity hurricane zone, and an undersized or wrong-rated connector fails an inspection every time. Measure twice, match the label, then order. We work with Mr-Glass as one of several documented brands on our material roster, alongside KraftMaid, Cambria, and Silestone for the interior finish work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
- Diagonal cracks at the wall junction. The new structure is settling at a different rate than the original house, usually because the footer wasn’t bearing on stable soil. Coral Gables’ limestone sits close to the surface, and a footer poured without checking the bearing depth will move.
- Windows and doors that stick in the wet season. Florida humidity swells wood framing and stresses impact-unit seals. A door that drags from June through October and frees up in winter is telling you the frame has taken on moisture.
- Soft or springy floor near a threshold. Water is getting in at the door sill or a low wall penetration. By the time the floor feels soft, the subfloor has usually been wet for months.
- Stucco cracking around new windows. Impact-rated units flex slightly under wind load, and if the installer didn’t leave the correct gap and sealant joint, the stucco cracks at the corners.
- Standing water along the addition’s exterior wall. The site grading wasn’t pitched away from the new structure. In Coral Gables, where summer rain comes hard and fast, that pools against the wall and finds every seam.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Coral Gables home addition, installed pricing runs $45,000 to $130,000. A garage conversion runs $30,000 to $80,000, and a full ADU build runs $90,000 to $220,000. Those ranges cover design coordination, permits and inspections, the structural and finish work, and the written guarantee. What moves you up or down the range: square footage, whether the foundation needs an engineered footer, impact-rating upgrades, and how much of the interior finish you want done to a high standard.
Every quote is a written line-item price before any work starts. No number changes at the door. Permits get pulled and inspections passed as part of the job. The finished work carries the 365-Day Done Right Promise: if something we built fails inside that year, we come back and correct it at no charge. Our technicians have up to 22 years of experience with additions and structural tie-ins. Call (833) 510-5367 for a free estimate and a written scope.
DIY or Call Us?
You can safely check a few things yourself: take a photo of the label on your Mr-Glass window or panel, note where cracks or soft spots appear, and look at how water drains along the addition’s exterior wall after a storm. That information helps us quote accurately. Where DIY goes wrong is structural. Any repair that touches the footer, the wall tie-in, the impact-rated glazing, or the load path needs an engineered fix and a permit. A homeowner who re-caulks a settling crack and calls it done is covering a problem that keeps moving underneath. Additions and ADUs are not a weekend fix, and we won’t pretend otherwise. Call (833) 510-5367 and we’ll tell you straight whether you’re looking at a repair or a rebuild.
FAQs

A correctly built addition should hold for decades, but in Coral Gables the components that fail first are the seals and the connections, not the structure. Expect window and door seals to need attention within 10 to 15 years because of humidity and storm cycles. Call (833) 510-5367 for an assessment.
Often yes. A diagonal crack or a sticking door can usually be traced to a fixable connection or drainage problem rather than a full rebuild. We inspect before we quote, so you’re not paying for a replacement you don’t need. Call (833) 510-5367 for a free estimate.
A repair or component replacement can be a few days; a full addition runs weeks to months depending on permits and size. We give you a written timeline with the price before work starts, and we hold to it. Call (833) 510-5367 to schedule your free estimate.
We match to your model label and order OEM or a documented equivalent that meets the same Florida Product Approval, so the part passes inspection. We don’t carry parts on a truck; each component is sourced to your specific model. Call (833) 510-5367 to start with a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












