







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Coral Gables Owner’s Guide
Replacing a failed Mr-Glass kitchen remodeling component in Coral Gables typically runs $14,000 – $45,000 installed for a full kitchen remodel, with smaller fixes and single-element swaps landing well below that. We install and coordinate Mr-Glass-compatible kitchen work across Coral Gables, and we give you a written price before a single tool comes out. Most owners discover the problem the same way: a cabinet run that no longer sits flush, a finish that has gone chalky along a window wall, or a countertop seam that has started to lift under a coffee maker. That is the moment the part stops being a detail and becomes the thing you notice every morning.
Bradford Remodeling Co Coral Gables is an independent service provider. We are not affiliated with Mr-Glass, and we don’t speak for the manufacturer. What we do is install and correct the work to spec, in writing, under The Garrison Standard.
Key Takeaways
- Full kitchen remodeling in Coral Gables runs $14,000 – $45,000 installed; smaller kitchens $9,000 – $20,000.
- Florida humidity and salt air near the Gables’ older coral-rock homes punish cabinet boxes and finish edges first.
- Every project gets a written price before work starts and the 365-Day Done Right Promise on completion.
- Our technicians have up to 22 years of experience with fitted cabinetry and surface work.
Which Mr-Glass Models This Applies To

Mr-Glass kitchen lines show up in Coral Gables homes in a few recognizable configurations: full fitted cabinet runs, pantry and island units, and surface-and-backsplash packages. Before we quote a single line, we identify the exact component by opening the cabinet door and reading the label on the inside face of the box or the drawer side, not by eyeballing the front. Model and series codes live there, and they tell us the box depth, the hinge boring pattern, and the finish family – the three things that decide whether a replacement part actually fits.
Here is the gotcha that trips owners up: Mr-Glass cabinet boxes from different production runs can share a face style but differ by a few millimeters in carcass depth, and a replacement door or drawer front cut to the wrong depth will rack and bind on the second or third open. We measure the opening, not the old part, and we confirm the series code before ordering. On the OEM-versus-aftermarket question, we’re direct about it. When the original series is still in production, OEM is the cleanest match. When it isn’t, we spec a quality aftermarket equivalent that meets the same hinge, finish, and substrate standards, and we write on the quote exactly what we’re substituting and why. No surprises at the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Drawer fronts that rub or stick. The box has swelled or the glide has worn, so the front no longer runs true in its opening. In Coral Gables this often shows up after a wet season, when humidity has had months to work on the substrate.
- Chalky or lifting finish along exterior walls. Sun and salt air break down the topcoat first on the sun-facing side. Once the finish lifts, moisture gets under it and the wood or composite underneath starts to move.
- Countertop seams that have opened. A hairline gap at the seam means the substrate has shifted or the original adhesive has failed. Left alone, water finds that gap and the problem spreads under the surface.
- Soft or spongy spots at the sink base. The cabinet floor around the sink is the first place a slow leak shows. By the time it feels soft, the substrate has usually been wet for a while.
- Doors that no longer close flush. Usually a hinge or a carcass out of square, not a door problem. That distinction decides whether you’re replacing a part or correcting the box behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Coral Gables, given as a real range, not a “call for a quote”:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the number of cabinet boxes and drawers, whether the substrate behind the cabinets needs correction before anything new goes in, surface material choice, and whether plumbing or electrical rough-in has to move. The written price breaks parts and labor into separate lines so you can see exactly what the replacement includes. Every completed project carries the 365-Day Done Right Promise – a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Open the doors and read the labels, measure the openings, and feel for soft spots at the sink base. That information is useful and it’s yours to collect.
Where DIY goes wrong is at the swap itself. Cabinet boxes are load-bearing assemblies; a countertop panel is heavy and unforgiving; and a mis-sized replacement part will bind, rack, and damage the box it’s mounted to. We’ve corrected plenty of jobs where a homeowner’s good-faith repair turned a door replacement into a carcass repair. We’re not going to hand you a step-by-step for that – it’s the kind of work where a trained hand pays for itself in the first hour. Call (833) 510-5367 and we’ll tell you straight whether your issue is a part or a box. A live person answers, 24 hours a day, 7 days a week.
FAQs

How long should a Mr-Glass kitchen cabinet or component last in Coral Gables? A properly installed cabinet box and finish should hold well past a decade in most Florida homes, but Coral Gables humidity and salt air shorten that on sun-facing and exterior walls. Regular inspection at the sink base and along the window wall catches the failure while it’s still a part, not a box.
Can the failed part be repaired instead of replaced? Sometimes, yes. A single worn glide, hinge, or door front can often be corrected without touching the rest of the run. We diagnose first and quote the repair honestly; if a repair won’t hold, we’ll say so and price the replacement. Call (833) 510-5367 for a free estimate.
How long does the swap take? A single component or small run is typically a day or two once the part is on hand; a full kitchen remodel is measured in weeks and scheduled around your written scope. We confirm the timeline in the written price before work starts.
How do you source the Mr-Glass part? We identify the series code from the cabinet or drawer label, measure the actual opening, and source either the OEM component or a quality aftermarket equivalent that meets the same spec. We don’t claim to stock Mr-Glass parts or carry them on a truck – we source to the job and write down exactly what we’re installing. The same disciplined sourcing applies to the other brands we work with, including KraftMaid, Cambria, and Silestone finishes.
When you’re ready, call (833) 510-5367 to schedule your free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians on the day, and a signed 365-Day Done Right Promise in your hand at job close. That’s what squared away looks like: clean site, documented scope, and a guarantee on paper.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












