







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Coral Gables Owner’s Guide
Fence installation work tied to an ES Windows product in Coral Gables typically runs $3,500 – $9,000 installed, depending on fence type, linear footage, and how much site prep the lot needs. We install vinyl, aluminum, and mixed-material fencing built around the ES Windows specifications from these systems, and we give every Coral Gables homeowner a written line-item price before any work starts. Homeowners usually discover a problem the same way: a gate that won’t latch square, posts leaning after a storm, or panels the ES Windows hardware no longer sits flush against. That’s when the questions start, and that’s what this page answers.
Key Takeaways
- Installed fence projects around ES Windows specs in Coral Gables: $3,500 – $9,000.
- Vinyl fences typically hold 15 – 20 years in South Florida; aluminum holds longer but corrodes near salt air.
- Written price before work begins, backed by the 365-Day Done Right Promise.
- We are an independent provider, not affiliated with ES Windows.
Which ES Windows Models This Applies To

ES Windows is a Florida-based manufacturer best known for impact-rated windows and doors, and the fencing that surrounds a property tied to an ES Windows installation has to match the way those openings are set – the posts near exterior corners, the clearance around sliders, and the gate alignment where a fence meets a wall or column. If your home has ES Windows impact sliders, casement lines, or a mix of fixed and operable units along the same elevation, the fence layout has to clear the exterior trim and drains those units depend on. Get that wrong and you’ll fight water intrusion before the fence is even a year old.
Identifying the right configuration starts with the label. ES Windows products carry an AAMA or manufacturer label on the frame or sash, and the model series will be stamped there. Write down the series and the rough opening dimensions. For fencing, what matters more is matching post spacing and gate geometry to the walls those ES Windows units sit in, so the fence doesn’t block drainage or trap humidity against the stucco. OEM extrusion and aftermarket equivalents both work when the gauge and coating meet Florida Building Code; the aftermarket route is honest money when the numbers line up, and we’ll tell you plainly when they don’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
- Posts leaning after heavy rain. Coral Gables soil is sandy and drains fast, but footings set too shallow give way during the wet season. If a post wobbles by more than a quarter inch at the base, the footing has failed.
- Gate no longer latching square. A sagging gate usually means a hinge has pulled from the post or the post itself has shifted. The cause is almost always footing movement, not the hardware.
- Rust streaks on aluminum panels. Salt air from nearby Biscayne Bay eats through cheap coatings in two to three years. Streaks mean the powder coat has failed and the base metal is exposed.
- Vinyl panels bowing or cracking. South Florida UV exposure makes low-grade vinyl brittle. Panels that flex when you press them are nearing the end of their life.
- Water pooling along the ES Windows base. A fence installed without a drainage gap traps runoff against the stucco and window framing. That’s a fence problem that becomes a window problem if you let it sit.
Replacement Cost & What’s Included

Here’s the honest pricing for Coral Gables fence work around ES Windows specifications:
- Vinyl fence installation: $3,500 – $9,000 installed, depending on linear footage and gate count.
- Aluminum fence installation: $4,000 – $10,000, higher on salt-exposed lots that need marine-grade coatings.
What drives the range: fence length, number of gates, footing depth required by Coral Gables code, and whether old posts have to be pulled. Part of that cost is the hardware (posts, brackets, gate kit) and the rest is labor and disposal. We hand you a written line-item quote before work begins – no numbers that move at the door – and every completed fence carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: whether the gate latches square, whether posts wobble at the base, and whether panels flex or show rust streaks. What you shouldn’t try alone is resetting footings or working at the top of a tall fence near a second-story window – both are fall and injury risks that a trained crew handles with proper equipment.
The most common DIY failure with ES Windows fence work is getting the drainage gap wrong. Homeowners seal the fence tight against the stucco, then find water backing into the window framing the next rainy season. Call us at (833) 510-5367 and we’ll walk the line with you before you commit to anything.
FAQs

How long does an ES Windows-spec fence last in Coral Gables? A quality vinyl fence holds 15 – 20 years here, and aluminum holds longer but needs marine-grade coating near the coast. Our technicians have up to 22 years of experience reading South Florida wear patterns. Call (833) 510-5367 for a free estimate.
Can a failing section be repaired instead of replaced? Often yes. Individual posts, panels, and gate hardware can usually be swapped without a full reinstall. We’ll tell you honestly if a repair makes sense or if replacement is the better number. Call (833) 510-5367 for an exact quote.
How long does the fence installation take? Most residential fence projects run one to three days, depending on footage and footing conditions. Larger lots or complicated gate geometry can push it longer. Call (833) 510-5367 to schedule your free estimate.
How do you source the fence hardware? We work with a documented roster of name-brand materials and match ES Windows specifications against manufacturer specs so quality is traceable. We don’t claim to stock parts – we source to the job. We also work with KraftMaid, Cambria, and Silestone on other projects. Call (833) 510-5367 for a written quote.
Get Your Free Estimate
Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate on fence installation in Coral Gables. We put the price in writing before any work starts, answer the phone with a live person 24/7, and stand behind every completed project with the 365-Day Done Right Promise. We are an independent provider and not affiliated with ES Windows.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












