







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Coral Gables Owner’s Guide
We install ES Windows-compatible windows and doors for Coral Gables homeowners, and most projects land between $4,500 and $15,000 for standard window replacement, or $8,000 to $25,000 when you move up to impact-rated units. Single-part and single-unit swaps can often be handled within a day once the correct match is confirmed. We’re an independent contractor, not affiliated with ES Windows, and every price we quote is written down before any work starts.
Owners in Coral Gables usually find the problem the same way: a window that won’t latch flush anymore, a door that drags against the frame, or a seal that fogged over after one too many summer storms. ES Windows sets are common in mid-century homes across Coral Gables and the surrounding blocks near the University of Miami, and the parts that fail first are almost always the same three: weatherstripping, glazing seals, and the roller hardware.
Key Takeaways
- Standard ES Windows replacement in Coral Gables: $4,500 – $15,000. Impact-rated upgrades: $8,000 – $25,000.
- Most failures trace to seals, weatherstripping, or hardware, not the frame itself.
- Correct model identification is the whole job. We walk you through it before a quote.
- Written price before work begins. Full-year guarantee on labor.
Which ES Windows Models This Applies To

ES Windows covers a broad range of aluminum and vinyl systems, spanning horizontal sliders, single-hung and double-hung units, casements, and fixed picture windows, plus patio doors. Coral Gables homes built between the 1950s and 1980s most often carry the older aluminum slider profiles, while newer builds and renovations tend toward the vinyl series. The labels on the glass corner and on the frame are your first stop. Cleaning the glass and checking the lower right corner of the sash usually reveals the manufacturer’s stamp with series and date codes.
If the label’s gone, measure carefully: frame dimensions, glass dimensions, and the reveal depth inside the jamb. A quarter-inch difference in reveal depth is the difference between a part that fits and one that binds. ES Windows changed sash profiles between some production years, so the same series name can span more than one track geometry. That’s the most common compatibility gotcha we run into in Coral Gables.
OEM versus aftermarket: OEM replacement parts give you an exact fit and a manufacturer’s paper trail, particularly on integrated hardware. Quality aftermarket equivalents are often a better value on seals and weatherstripping because those aren’t proprietary. Our technicians have up to 22 years of experience matching these systems, and we’ll tell you plainly which way to go on your specific unit.
We also work with other name-brand systems common in Coral Gables homes, including KraftMaid, Cambria, and Silestone. You can count on us treating every system with the same thoroughness.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
If you’re noticing any of these symptoms, the part is telling you something. Each one points to a different component.
- Fogging between the glass panes. The seal on the insulated glass unit has failed. Moisture got in, and once it does, it’s not coming out. You’ll need a glass unit replacement, not a reseal.
- Drafts and condensation on the interior sash edge. The weatherstripping has compressed or cracked. Coral Gables humidity accelerates this. Rubber and foam strips harden in the heat, then stop sealing.
- A slider that drags or jumps on its track. The roller wheels or the track itself have worn. Salt air and grit get into the rollers over years, and the nylon wheel loses its profile.
- A latch that won’t engage without a fight. The keeper or the lock mechanism has drifted or worn out. It’s a safety and security issue on an exterior door, not just an inconvenience.
- Water staining on the sill or interior trim. The sill pan or the perimeter sealant has broken down. Left alone, water reaches the rough opening, and then you’re into framing repair, not just parts.
Each of these has a different repair path and a different price. We’ll tell you which one you’re looking at before anyone touches a tool.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Standard ES Windows replacement runs $4,500 to $15,000 for a typical Coral Gables project. If you’re upgrading to impact-rated windows, the range is $8,000 to $25,000, reflecting both the glass spec and the reinforced frames. For single units or partial replacements, expect to land at the lower end of that range. The full set drives the higher end.
The range is set by four variables: the number of units, the glass specification, the frame material and profile, and the complexity of installation (second-story work, stucco removal, or existing frame damage all add labor). Every quote is written and itemized before work starts. Nothing moves at the door.
Installed price includes removal of the old unit, disposal, supply of the matched part, installation labor, perimeter sealing, and a clean site at close. All completed work is covered by our 365-Day Done Right Promise. If the work fails within that period, we come back and correct it at no charge.
What’s included in every install
- Written, itemized price before any work begins
- Background-checked, uniformed technicians
- Removal and disposal of the old unit
- Independent ES Windows-compatible sourcing (we’re not ES Windows)
- Perimeter weathersealing and site cleanup
- 365-Day Done Right Promise on the installation labor
DIY or Call Us?
Here’s the honest split for ES Windows in Coral Gables. You can safely check and handle a few things yourself: cleaning the track with a stiff brush and checking whether the roller wheels spin freely; measuring the frame and glass; identifying the label; checking whether a latch or keeper is physically broken. If a roller replacement is all you need and you can find the exact match, that’s a reasonable homeowner project.
What usually goes wrong is the part fit and the seal. A roller that’s 1/16-inch off profile binds the sash over time. Weatherstripping installed over a surface that isn’t cleaned and dried properly releases within a season in this climate. Glass unit replacement on an insulated unit requires proper settings and is not a homeowner task.
When in doubt, call us at (833) 510-5367. We’ll tell you whether it’s a quick fix you can handle or a job worth doing right the first time.
FAQs

Expect 15 to 25 years for a properly sealed insulated glass unit, and 10 to 15 years for the weatherstripping. Salt air and humidity in Coral Gables shorten both timelines. The frame and sash, if aluminum or vinyl and undamaged, often outlast two or three cycles of the soft parts. When the seals fail before the frame does, replacing the affected units makes more sense than a full window replacement.
Sometimes. Rollers, latches, keepers, and weatherstripping can each be replaced independently at a lower cost than a full unit. Fogged insulated glass units usually can’t be repaired reliably. Once the seal is gone, moisture is inside the cavity. Replacing the glass unit itself is usually the right move. For your specific situation, call (833) 510-5367 for a free estimate so we can tell you which approach makes sense.
A hardware swap (rollers, latches, keepers) usually takes one to two hours per unit. A weatherstripping replacement runs about the same. A glass unit replacement or a full sash replacement typically runs two to four hours per unit. Larger projects across multiple windows in Coral Gables will run into the following day. We confirm the timeline and the written price before work starts, so you’ll know exactly how long you’re looking at.
We identify your unit by the glass-corner label and by precise measurement of the frame, glass, and jamb reveal. If the label is missing, the measurements and the production-era profile fill the gap. We match the part to the profile, not just the series name. We’re independent and not affiliated with ES Windows, but we source compatible parts for the systems we find in Coral Gables homes, and we tell you up front whether the fit is OEM or a quality aftermarket equivalent. Call (833) 510-5367 to schedule your free estimate.
Whether you’re looking at one dragging slider or a whole set of windows that have stopped sealing, the next step is a written price. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. Every Coral Gables job gets a price in writing before we start and our full-year 365-Day Done Right Promise when we finish.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












