







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Coral Gables Owner’s Guide
If your ES Windows roof system has a failed component, we install ES Windows-compatible roofing parts and assemblies in Coral Gables, and the work typically runs $400 – $1,800 for targeted roof repair or $8,000 – $20,000 for a full replacement when the failure is wider than one part. We don’t promise same-day service on planned roof work – we schedule it properly and put the price in writing first.
Most Coral Gables owners find out this way: a hairline crack or a soft spot shows up after a storm, water starts weeping past a flashing detail, or their roofer says the ES Windows product on the roof can’t be matched anymore. The roof is the part of the house that fails quietly, and in Coral Gables that failure has a cost attached fast. This guide covers what actually fails, what it costs, and how to decide between a repair and a replacement.
Key Takeaways
- Roof repair in Coral Gables: $400 – $1,800. Roof replacement: $8,000 – $20,000. Tile roof repair: $600 – $2,500.
- ES Windows roof parts are matched by profile, not by brand name alone – measure and photograph before you order anything.
- South Florida heat, wind-driven rain, and UV break down sealants and fasteners years before the panels themselves fail.
- We’re an independent contractor. Bradford Remodeling Co Coral Gables is not affiliated with ES Windows.
Which ES Windows Models This Applies To

ES Windows produces a range of window and door systems, and some of their assemblies interact directly with the roof envelope – roof windows, skylights, and the flashing kits that seal where a glazed unit meets the roof plane. When an owner tells us “the ES Windows roof part failed,” they’re usually describing one of three things: a skylight unit, the flashing kit around it, or a roof panel that a former installer sourced through ES Windows to match an existing system.
The compatibility gotcha is this: ES Windows parts are spec’d by profile dimensions and series, not by a single universal part number. A skylight flashing kit that fits one series won’t seat correctly on another, and the difference can be a quarter inch in the flange width. On a Coral Gables roof, that gap is where water gets in. Before we quote anything, we photograph the label on the unit, measure the rough opening, and check the flange geometry against what the factory spec calls for.
On the OEM-versus-aftermarket question, we’re direct with homeowners: OEM parts give you an exact match and a traceable paper trail, but they cost more and sometimes take longer to source. A quality aftermarket equivalent can work well when the dimensions and material match the original spec, and we’ll tell you when one is the better call. What we won’t do is order a part that fits “close enough” – on a roof in this climate, close enough is a leak with a delay on it. We also install KraftMaid, Cambria, and Silestone products on the interior side of a project, so a homeowner remodeling alongside a roof job can keep the same contractor and the same standard of written pricing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
- Cracked or cloudy glazing on a skylight unit. UV exposure in South Florida degrades the seal between panes, letting moisture in. Once the glazing clouds, the unit is losing its insulating value whether or not it’s leaking yet.
- Water staining on the ceiling below a roof window. That’s the flashing kit failing, not the glass, in most cases. Sealant and fasteners around the perimeter break down years before the unit itself does.
- Loose or lifted flashing at the roof transition. Wind-driven rain during a Coral Gables storm can work under a lifted flange. If you can lift the edge by hand, water is already finding the gap.
- Ponding or soft spots on the roof deck nearby. A failed flashing detail lets water migrate under the membrane, and the rot shows up as a soft spot a foot or more from the original leak.
- Visible rust or corrosion on fasteners. Salt air and humidity in this market eat through cheap fasteners first, and a corroded screw has already stopped holding its designed load.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what roofing work runs in Coral Gables, based on the scope and the part involved:
| Scope | Installed Price Range |
|---|---|
| Targeted roof repair (flashing, seal, minor part) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What moves the price: the size of the opening, whether the deck underneath is sound, whether the roof pitch allows standard flashing or needs a custom bend, and whether the original install left you with a code-compliant base to build on. Our written price separates parts from labor, so you see what the ES Windows-compatible part costs versus the labor to install it. There are no numbers that move at the door. Every roof we complete carries the 365-Day Done Right Promise – a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
You can safely check some of this yourself. Look for ceiling stains, run a hand along the flashing edge to feel for a lift, and check the label on any skylight unit so you know the series before you call anyone. That’s the extent of what’s safe to do from the ground or from a stable interior view.
Roof work is height work, and in Coral Gables the combination of pitch, wind, and afternoon storms makes it genuinely dangerous. We don’t recommend homeowners get on the roof to diagnose or replace this part – a fall from a one-story roof is still a serious injury, and a flashing kit installed wrong lets water in for months before you notice. If you’ve already got a stain on the ceiling, the diagnosis is worth more than the guess. Call (833) 510-5367 and we’ll get a written roof repair price to you before any work starts.
FAQs

Expect the glazed unit to last 15 – 20 years and the flashing and sealant to need attention far sooner – often every 5 – 8 years in South Florida heat and salt air. The UV load here is brutal, and the sealant around a skylight perishes well before the glass does. Call (833) 510-5367 for an exact quote – estimates are free.
Yes, in many cases. A failed flashing kit or a corroded fastener ring can often be repaired for $400 – $1,800 rather than replacing the whole unit. The test is whether the glazing and the panel underneath are still sound; if they are, repair is the sensible call. Call (833) 510-5367 and we’ll tell you honestly which one you’re looking at.
A targeted flashing or part repair is usually a single-day job. A full roof replacement typically runs several days depending on square footage, pitch, and material. We schedule it properly and give you the written timeline with the written price. Call (833) 510-5367 for a free estimate on your roof.
We measure the opening, photograph the label, and match the part to the series by profile dimension – not by guesswork. Where an OEM ES Windows part is the right call we’ll say so; where a quality aftermarket equivalent meets the same spec we’ll price that option too. Either way, the part is documented in your written scope before work begins. Call (833) 510-5367 to start.
When you’re ready to price the job, call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. A live person answers, day or night. You’ll get a written, line-item price before any work starts, background-checked technicians on the job, and a full-year written guarantee in your hand at close – clean site, signed scope, squared away.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












