







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The Coral Gables Owner’s Guide
CWS-compatible fence installation in Coral Gables runs $3,500 – $9,000 installed for a typical residential run, with the final figure set by footage, material, and gate count. We give you that number in writing before any work starts, and it does not move once the crew is on site. Most owners call us after a storm or a slow lean they can’t ignore: a gate that drags on the pavers, a post set loose in saturated ground, or a run of panels that has started to rack out of square along the property line.
Coral Gables is hard on fences. The same rain that waters the live oaks rots untreated wood in three to five years, and the salt air moving in from the Gables’ east side eats at fasteners and metal hardware long before the panels themselves give out. If your CWS fence is failing, it’s usually the ground and the hardware before it’s the panel – which matters when you’re deciding what to replace.
Which CWS Models This Applies To

We install fence systems that meet CWS specifications and handle the full run, not just a patch. CWS has offered several residential fence lines over the years, and the important thing is matching your exact model and the spec called for on your property – post spacing, panel height, and material grade all change from one install to the next. Bring us the fence run and any install documentation you have, and we’ll confirm what fits before we quote.
To identify what you’re working with, measure the actual post spacing (most residential runs land between 6 and 8 feet) and note the panel height and material at the posts. If a matching panel is needed, the OEM route gives you an exact fit but at a higher per-panel price; a quality aftermarket equivalent, correctly matched on gauge and profile, usually saves 15% to 30% and performs the same when the hardware is right. There’s one compatibility gotcha we see often: aftermarket panels matched on height but not on profile won’t line up with existing posts, and you end up re-setting posts you didn’t plan on. We measure before we order. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Fence Installation Is Failing
- Posts leaning after heavy rain. Coral Gables’ high water table and sandy topsoil let a post that was set shallow shift once the ground saturates. A lean that shows up after the summer storms usually points to footing depth, not the panel.
- Gate dragging on the ground or sticking. This is almost always a sagging post or a hinge that has pulled loose, not a gate problem. Fixing the post fixes the gate.
- Rust or corrosion at fasteners and hardware. Salt air from the Atlantic side of the Gables accelerates this. When the fasteners corrode, the panels loosen and the whole run starts to rack.
- Rotted or softened wood at the base of posts. Untreated or poorly sealed wood in South Florida’s humidity goes soft at the ground line first. If you can push a screwdriver into the post base, the post is done.
- Panels out of square along the run. This shows up as a fence that waves when you sight down the line. It’s usually a mix of footing movement and hardware that’s loosened over time.
Replacement Cost & What’s Included

Fence installation in Coral Gables runs $3,500 – $9,000 installed, and we quote it in writing before work starts. Vinyl fence installation lands in that same $3,500 – $9,000 range, while aluminum fence installation runs $4,000 – $10,000 depending on height and gate count.
What drives the range: total linear footage, material (vinyl, aluminum, or wood), number of gates and their hardware, and how much old fence and footing has to come out first. A short run with one gate sits near the bottom. A long perimeter with two gates and deep post-setting sits near the top. Your written price breaks out materials and labor so you can see where the money goes. Every install we complete carries the 365-Day Done Right Promise – a full-year written guarantee; if the work fails inside that window, we come back and correct it at no charge. We also work with a documented roster of name-brand materials on our remodeling side, including KraftMaid, Cambria, and Silestone, and hold the same standard on outdoor work.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: sight down the fence line to spot leans and out-of-square panels, push on each post to test for movement, and look at the hardware for rust. What you shouldn’t take on is re-setting posts or rebuilding a gate frame. A post set to the wrong depth in Coral Gables’ soil will lean again within a season, and a gate hung out of square will drag no matter how many times you adjust the hinges. That’s the work that goes wrong and costs more the second time.
There’s no high-tension or electrical danger on a fence job, but the footing work is where the skill is, and it’s what most DIY fence failures come down to. If the run is failing, call us at (833) 510-5367 and we’ll tell you straight whether it’s a repair or a replacement – free estimate, no pressure.
FAQs

How long does a CWS fence last in Coral Gables? Plan on 10 to 15 years for a properly set vinyl or aluminum run, and three to five for untreated wood in South Florida’s humidity. Hardware and footings usually fail first, so the panels often outlast the posts.
Can it be repaired instead of replaced? Often, yes. A single leaning post, a dragging gate, or one damaged panel can usually be corrected without replacing the whole run. We’ll give you a straight answer on repair versus replacement during the free estimate. Call (833) 510-5367.
How long does the swap take? A typical residential run in Coral Gables takes one to three days depending on footage and how much old fence has to come out. We set the schedule in writing along with the price. Call (833) 510-5367 for your estimate.
How do you source the part? We measure your existing run and match the panel profile, height, and post spacing before we order, so aftermarket equivalents line up with what’s already there. You get the written price and the spec before any work starts. Call (833) 510-5367.
Get Your Free Fence Estimate
If your CWS fence in Coral Gables is leaning, dragging, or due for replacement, we’ll measure the run, confirm what fits, and hand you a written price before any tool comes out. Bradford Remodeling Co Coral Gables is held to The Garrison Standard: a documented scope, a clean site at close, and the signed 365-Day Done Right Promise in your hand when the job is done. A live person answers the phone day or night. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












