







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Coral Gables Owner’s Guide
We handle CWS kitchen remodels in Coral Gables at $14,000 – $45,000, and a typical full kitchen is usually a two-to-four-week job once materials land. CWS isn’t a cabinet or countertop brand you’ll find sold loose at a supply house; it’s a remodeling program, so “parts” here means the specific KraftMaid or Wellborn box sizes, the Cambria or Silestone slab template, the Kohler and Moen rough-in valves, and the filler panels and trim that tie a CWS layout together. Owners usually discover a failure the same way: a door that won’t sit flat because a hinge plate pulled out of thin particleboard, a cabinet run that’s gone soft at the toe kick from a slow leak behind the sink, or a countertop joint that’s opened up a hairline over the dishwasher.
Which CWS Models This Applies To

CWS jobs in Coral Gables tend to run from builder-grade galley refreshes up through full custom kitchens, and the right replacement depends on which cabinet line the original spec called for. The first check is the interior of a cabinet door or the back of a drawer box: KraftMaid and Wellborn both label their boxes, and that sticker tells you the series, the door style, and the finish code. Without it, we measure the cabinet opening, the overlay (full or partial), and the hinge bore spacing, because a 35mm European cup hinge won’t drop into a 26mm bore without a new door.
The OEM-versus-aftermarket decision matters most on cabinetry and stone. A factory door in the correct CWS finish is the only way to guarantee a grain and sheen match to the surviving run; an aftermarket equivalent in the same species and stain gets you 80% of the way there at a lower cost. On countertops, we template from your actual walls rather than trusting the original drawing, because Coral Gables homes settle and a 1/8-inch wall bow will leave a visible gap at a backsplash. We’re an independent contractor and not affiliated with CWS, which means we match the part to your model instead of pushing whatever’s on a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- Doors that won’t stay aligned. The hinge plate screws have stripped out of the cabinet gable, usually because the original install used short screws into 5/8-inch particleboard rather than into a solid rail.
- Soft or swollen toe kicks and lower cabinet bottoms. A slow supply-line or disposal leak under the sink saturates the substrate; by the time you see the bubbling, the cabinet floor is already gone.
- Caulk lines at the countertop and backsplash cracking open. The stone or the wall has moved, or the original install skipped a flexible sealant at the joint, letting moisture wick in behind the slab.
- Drawers that grind or pull crooked. The slide has lost its mounting screws or the box has racked, often on the heavier pot drawers where a cheap slide was asked to carry 75 pounds.
- Hairline cracks radiating from a sink cutout or cooktop opening. That’s stress concentration at a rough edge that wasn’t polished, and it’s common on quartz in Florida’s humidity swings.
Replacement Cost & What’s Included
Replacement work in Coral Gables runs the range you’d expect for a market with this much older housing stock and stone. Cabinet installation sits at $4,000 – $13,000, countertop installation at $2,000 – $6,500, backsplash at $800 – $2,500, and a full kitchen remodel at $14,000 – $45,000. A single door or drawer front swap is at the low end; a full cabinet run replacement with new stone and a re-templated backsplash is what pushes toward the top. Labor, removal and disposal of the old materials, new fasteners and shims, sealing, and touch-up are in the written price before a tool comes out. Every completed project carries the 365-Day Done Right Promise: if the install fails inside that year, we come back and correct it at no charge. We also work with KraftMaid, Cambria, and Silestone, among others, so the spec stays traceable.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure the cabinet opening and hinge bore, note the sticker inside the door, and photograph the failing joint or soft spot before you touch it. You can tighten a loose slide screw or re-caulk a countertop joint that’s merely cosmetic. Where it goes wrong is water damage and structural cabinet failure; a swollen toe kick means the subfloor and the cabinet bottom may both need replacing, and cutting into a supply line or a gas line behind the range is how a $400 repair becomes a $6,000 one. Rough-in electrical for a new cooktop or under-cabinet lighting is not a homeowner job in Coral Gables. If you’re unsure whether you’re looking at a cosmetic crack or a failing countertop, call us at (833) 510-5367 and we’ll tell you straight.
FAQs

Fifteen to twenty-five years on the cabinets and stone if the original install was done right, and noticeably less where a supply leak or Florida humidity went unaddressed. Wiping up under-sink moisture and re-sealing joints every few years is what gets you to the long end. Call (833) 510-5367 if you’re past the ten-year mark and seeing soft spots.
Often yes. A stripped hinge plate can be repaired with a hardwood insert, a failing drawer slide can be swapped, and a hairline countertop crack can sometimes be filled and polished. Repairs stop making sense when the cabinet box itself is swollen or the countertop is cracked through a stress point. Call us for an honest read before you commit either way.
A single door or slide swap is an hour or two; a cabinet run with new stone and backsplash is typically a two-to-four-week project once the replacement parts arrive. Lead time on a factory-match CWS door is the usual bottleneck, not the labor.
We identify the series from the cabinet label or by measurement, then order the matching door, box, or stone template from the documented brand line. Where a factory part is discontinued, we propose the closest OEM equivalent and tell you plainly what the match will and won’t be. Call (833) 510-5367 to start with a free estimate.
A Note on Safety and Straight Pricing
Two things we won’t do: pretend a soft cabinet is a cosmetic issue, and give you a price that changes at the door. Every CWS kitchen job we take in Coral Gables starts with a written, line-item price before work begins, and it doesn’t move unless you approve a change in writing. Our technicians have up to 22 years of experience, they’re background-checked and arrive in uniform, and a live person answers the phone around the clock. If you’ve been left with half a kitchen by a crew that stopped showing up, we’ll document the scope, finish what’s there, and hand you a signed written guarantee when the site is clean and squared away.
Call (833) 510-5367 to schedule your free estimate. We’ll measure the CWS kitchen in your Coral Gables home, identify the parts, and put the price and the 365-Day Done Right Promise in writing before anything gets cut.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












