







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Coral Gables Owner’s Guide
We install and service CGI-compatible windows and doors for Coral Gables homes, with typical installed window replacement running $4,500 – $15,000 and impact-rated window installation at $8,000 – $25,000 depending on opening count, glass package, and frame series. Door and window hardware rebuilds, sash repairs, and full unit swaps can usually be scheduled within a few business days once the correct part is matched to your CGI model line. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with CGI.
Owners usually discover a failing CGI window or door the same way: the window that used to close with a palm, now needs a hip check. Or the door in the back of a Gables bungalow starts sticking every June, then stops sticking in November, which is your first clue that the problem is the frame moving with the season rather than the hardware alone. Coral Gables is a salt-air town with a wet season that pushes humidity over 80 percent for months, and CGI products in this market fail on a predictable curve tied to those conditions.
Which CGI Models This Applies To

CGI offers several window and door lines that don’t share parts, and this is the most common reason a homeowner buys the wrong replacement hardware and has to return it. The critical thing to know: CGI’s aluminum single-hung and horizontal slider lines use different roller and latch hardware than its vinyl new-construction series, even when the sightlines look identical from inside the house. Before ordering anything, find the manufacturer’s label, which on CGI units is usually stuck to the head jamb or the top of the sash, visible with the window open. It carries the series name, the size code, and the performance rating.
Measure the visible glass, the frame width, and the rough opening clearances. If those don’t line up with the label, your window was likely a custom build for a previous owner’s opening, and the part is a special order rather than a stock catalog item. On the OEM-versus-aftermarket question: CGI’s own replacement hardware is the safest match for latches, hinges, and sill components. For rollers, weatherstripping, and screens, quality aftermarket equivalents are usually fine and often less expensive. We tell Coral Gables clients which is which before we order, in writing. KraftMaid, Cambria, and Silestone are among the other brands we work with when a window or door repair turns into a larger remodel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Difficulty latching or locking. The keeper and lock no longer align because the sash has racked or the frame has shifted. Common after a wet season in Coral Gables.
- Sticking or dragging on the track. Failed rollers or worn pivot shoes. If the track is scored, the hardware has been dragging for a while.
- Fogging between the panes. The insulated glass seal has broken. That’s a glass unit replacement, not a hardware fix, and it typically shows up 10 – 15 years in.
- Water staining or softness at the sill. The sill pan or flashing has failed. Left alone, this rots the rough opening and turns a window job into a framing repair.
- Drafts or whistling at the perimeter. Worn weatherstripping or caulk joints. Salt air and sun accelerate both, especially on south and west exposures.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, here’s what these jobs run installed. A single window replacement starts around $250 – $600 per opening for a standard-size unit, with full-window replacement at $4,500 – $15,000 for a typical house package. Impact window installation for the whole home runs $8,000 – $25,000, which matters here because Coral Gables sits in the high-velocity hurricane zone and impact glass is often a code and insurance question, not just a comfort one. Door replacement, including a Therma-Tru entry, typically lands in the same $4,500 – $15,000 band depending on size and whether it’s a single or double opening.
What drives the range: number of openings, frame series, whether you’re replacing the sash only or the full unit, and whether the rough opening needs repair. We give you a written price before any work starts, with parts and labor broken out line by line, so you can see exactly what you’re paying for. Every completed window and door job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. That’s the whole guarantee, stated plainly.
DIY or Call Us?
You can safely check a few things yourself. Open the window and read the label. Wipe the track and look for scuffing. Test the lock with the window fully seated. Try the door to see if it drags in one spot and what the gap looks like at the top.
Where DIY goes wrong: window and door replacements are structural openings, and in Coral Gables, impact-rated installations are subject to the Florida Building Code and Miami-Dade product approval requirements. Getting the flashing or the sill pan wrong doesn’t show up in the first month, it shows up in the first hurricane season or after two wet seasons of slow water intrusion. And a misplaced impact unit can fail an inspection, which means it comes back out. We pull the permits and pass the inspections; that’s part of the written scope. Call (833) 510-5367 and we’ll give you a straight number.
FAQs

How long do CGI windows and doors last in Coral Gables? Aluminum frames typically hold 20 – 30 years; the hardware inside them (rollers, locks, weatherstripping) and the insulated glass seals usually go first, often around the 10 – 15 year mark. Salt air and year-round humidity speed that timeline up, particularly on south and west-facing openings.
Can a failing CGI window or door be repaired instead of replaced? Often, yes. Hardware and glass unit swaps are common repairs. Call (833) 510-5367 for a free estimate and we’ll tell you honestly whether a repair is the right call or whether the frame is too far gone.
How long does the swap take? A single window or door repair is usually a few hours. A full-home window package typically runs a few days depending on count and weather. Your written scope gives the timeline before work begins.
How do you source the part? From the model label. If the label is missing, we measure the opening and match it to the closest CGI series, or we special order. We don’t guess and we don’t install mismatched hardware. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












