







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Coral Gables Owner’s Guide
We install PGT-compatible windows and doors across Coral Gables, and most whole-unit swaps land between $4,500 and $15,000 for window replacement, or $8,000 to $25,000 when you’re specifying impact glass. The part that fails first is almost always the hardware, not the glass: a sliding patio door that won’t latch, a window sash that drags or won’t stay up, a screen track that’s chewed through. PGT builds specifically for Florida wind and salt exposure, so when something goes, it’s usually a wear component giving out after years of UV and humidity – not a structural defect.
Key Takeaways
- PGT hardware is model-specific. The part that fits a WinGuard slider won’t drop into a different series.
- Impact units are priced higher for a reason: heavier frames, laminated or insulated glass, reinforced hardware.
- We’re an independent contractor, not PGT. We source compatible parts and install them to spec.
Which PGT Models This Applies To

PGT ships several lines into South Florida, and the hardware doesn’t cross over cleanly. The WinGuard impact series, the Estate Collection, and the aluminum series each use different roller assemblies, sash balances, and latch sets. Before we quote anything, we find the model line and the unit’s spec label, usually a small etched or printed tag tucked in the head jamb or on the interior frame of a slider. That label tells us the series, the glass package, and often the original hardware spec.
The OEM-versus-aftermarket call matters here. For a coral Gables home with original PGT impact units, an OEM roller or balance keeps the warranty picture and fit clean. For older non-impact units, a quality aftermarket match often does the same job for less, provided the dimensions and load rating line up. The catch most owners miss: PGT frame dimensions shifted across production years, so a “same size” replacement sash from a different year can sit proud or bind in the track. We measure the actual opening, not the nominal size, before ordering. Our technicians have up to 22 years of experience reading these labels and matching parts to the unit in front of them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
- Sliding door that won’t latch or lock smoothly. The latch and keeper have drifted out of alignment or the roller has worn flat, dropping the panel. A door that won’t secure is a real security gap, not just a nuisance in Coral Gables.
- Sash that won’t stay up, or drops when you let go. The balance spring or block has lost tension. On impact units this is a heavier component and a worn balance can let a sash slam.
- Grinding or dragging when you slide a panel. The roller assembly is shot or the track is packed with grit and salt film. Continued dragging wears the frame and the track itself.
- Water intrusion at the sill or corners during a storm. Weatherstripping, sweeps, or corner seals have hardened and pulled away from years of heat. This is the failure that leads to interior damage if it’s ignored.
- Fogging between panes or a cracked screen track. The seal on an insulated unit has failed, or UV has made the screen frame brittle. Fogging means the glass unit needs replacing, not just the hardware.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope | Installed price range |
|---|---|
| Window replacement (standard units) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Hardware/part swap on existing unit | Quoted per unit, itemized in writing |
The range moves with unit count, frame size, glass package, and whether you’re matching an existing series or specifying new impact glass. Parts plus labor are broken out line by line in a written price before any work starts – no numbers that move at the door. Every install carries our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check the obvious: clean the track, look at the spec label, note whether the panel drags or the sash drops. That tells you what you’re dealing with. Where DIY goes wrong with PGT hardware is the fit. A wrongly sized roller or balance can bind the sash, crack the frame, or leave a door that won’t lock – and on impact units you’re working with heavy panels and spring-loaded balances that can snap back hard. A dropped impact sash is a genuine injury risk.
For a straightforward hardware swap on a standard window, a careful homeowner can manage it. For anything involving a balance, an impact panel, or a full unit replacement, we’d rather a trained tech handle it. Call (833) 510-5367 and we’ll tell you straight which side of that line your job falls on.
FAQs

Expect 20 to 30 years from the frame and glass, but hardware like rollers, balances, and weatherstripping typically wears out in 10 to 15. Coral Gables salt air and summer UV speed that up, so hardware usually needs attention well before the unit itself does.
Often, yes. A worn roller, balance, latch, or strip of weatherstripping can be replaced on its own if the frame and glass are sound. We only recommend a full unit when the glass has fogged, the frame is cracked, or the part is discontinued for that series.
A single hardware swap on one unit runs a few hours. A full window replacement depends on count and whether we’re matching an existing PGT series or installing impact glass – we put the timeline in the written scope before we start.
We read the unit’s spec label, measure the actual opening, and match the part to the series and production year. We work from a documented roster of name-brand materials, and we also handle KraftMaid, Cambria, and Silestone when a window or door project overlaps with cabinetry or countertop work.
Bradford Remodeling Co Coral Gables is an independent contractor and is not affiliated with PGT. If your PGT windows or doors need a part matched and installed right, call (833) 510-5367 for a free estimate – a live person answers, 24/7, and every price comes to you in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












