







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Coral Gables Owner’s Guide
PGT impact roofing and the flashings, fasteners and edge metal that go with it can be repaired or replaced in Coral Gables, and most roof repair work here runs $400 – $1,800, with full roof replacement at $8,000 – $20,000. We handle PGT-compatible roofing work by written estimate, and we don’t promise same-day installs on planned roof work – South Florida roof jobs get scheduled against weather windows, not a stopwatch. Owners usually call us after a ceiling stain appears near a valley, after a wind-driven rain event pushes water past a fastener line, or after an inspector flags lifted edge metal on a PGT system.
Which PGT Models This Applies To

PGT makes windows and doors, and their impact products carry a product line and label on the frame glass or jamb. Roofing hardware sold or specified alongside those systems breaks down into three families: impact-rated fasteners, perimeter edge metal, and flashing components. The model identification sits on the PGT label on the unit itself, not on the roof. Read that label before you call anyone. The letters and digits on your impact unit tell us the vintage and the specification our roofing scope has to match. Match wrong and the roof part you buy won’t seat, won’t seal, or won’t pass inspection.
Three compatibility gotchas matter in Coral Gables. First, fastener gauge. A #8 vs #10 vs #12 screw picks up a different hole in the edge metal and a different bite in the substrate. Second, edge metal profile. Two-piece drip edge and one-piece rake metal don’t interchange, and the screw hole pattern differs. Third, finish tolerance. PGT’s impact-rated systems get specified alongside particular edge-metal finishes that hold up in salt air, and a cheap mill-finish replacement pits faster on a Coral Gables roof than on an inland one. On the OEM-vs-aftermarket question, the answer for PGT is: OEM or a documented equivalent that names the spec on paper. We don’t stock parts and we don’t carry them on a truck, so any part we source gets ordered against the model label you send us. We’re an independent service provider, not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
- Water staining at the ceiling near a window head. Usually the flashing detail around the impact unit, not the glass. The flashing has lost its seal or its fastener has backed out.
- Lifted or curled edge metal. Low-slope rake metal rolls up over time under wind uplift. Once it lifts, wind-driven rain gets under it and works down the deck.
- Backed-out or rusted fasteners. Coral Gables salt air pits cheap fasteners faster than the roof itself. A fastener that backs out leaves a hole with nothing in it.
- Granule loss on the shingle or tile underneath the unit. Material shedding off the deck above a window head means the substrate is taking water it shouldn’t.
- Visible daylight through a joint at the perimeter. A gap at the fascia or drip edge is a daylight leak. Water and pest entry follow.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Repair pricing in Coral Gables runs $400 – $1,800 for focused roofing repair. Full replacement runs $8,000 – $20,000 for a standard roof, $15,000 – $40,000 for metal, and tile repair runs $600 – $2,500. What drives the number is the roof pitch, the number of penetrations, how much of the deck needs replacement, and whether the scope pulls permits. What’s included: the part, the labor, the cleanup, and a written price before we start. No number moves at the door. What’s not included: nothing hidden in the fine print. If the deck is soft and needs to be replaced, we tell you before we start, not after.
Every completed project is covered by the 365-Day Done Right Promise. If the flashing fails or a fastener backs out within that first year, we return and correct it at no charge. Materials get specified from documented brands and traceable product lines, which is what keeps the guarantee meaningful.
DIY or Call Us?
What an owner can check safely: the model label on the impact unit, the visible condition of edge metal, whether fasteners are rusting or backed out, and whether the perimeter shows daylight. What an owner should not attempt: any repair above the first story, any repair that requires walking the roof pitch, any lifting of the edge metal, and any replacement of flashing detail. Coral Gables roofs sit at heights and pitches where a fall is a real hospital bill, and one wrong fastener leaves a leak you’ll find months later. Roof work isn’t a low-stakes DIY. Call us, and if inspection says your job is genuinely small, we tell you that. If it isn’t, we tell you what it takes.
We work alongside KraftMaid, Cambria, Silestone, and other documented brands across the rest of the home, which means if your PGT roof work turns into a broader project, one crew has the scope written down. Give us a call and we’ll get you a free written estimate.
FAQs

Fasteners, edge metal, and flashing generally fail before the roof material does in Coral Gables, often inside 10 – 15 years under salt-air exposure. The salt-air environment on a Coral Gables roof oxidizes cheap fasteners faster than inland, which is why material spec matters more here than performance tables on a box show. Call (833) 510-5367 for a free estimate.
Yes, in most cases a failed flashing or edge-metal detail can be repaired instead of replaced. Repair pricing in Coral Gables runs $400 – $1,800, and the decision is about whether the surrounding material is still sound. Call (833) 510-5367 for a free written estimate.
A focused flashing or fastener repair on a PGT-compatible roof takes one day in most Coral Gables cases, weather permitting. Full replacement takes longer and gets scheduled against the Coastal South Florida wind and rain window. Call (833) 510-5367 for a schedule that fits your job.
We order against the model label on your impact unit, not from a truck. That means the part matches your PGT specification on paper and the guarantee covers it. Call (833) 510-5367 and we’ll walk you through what to send us.
If you’re in Coral Gables and the roof around your PGT system has taken water, call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. We’ll give you the price in writing, walk the roof with you, and put the 365-Day Done Right Promise on every project in plain language. Technicians have up to 22 years of experience, and a live person answers the phone 24/7.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












