







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Coral Gables Owner’s Guide
If you’re pricing a Boral-clad addition or accessory dwelling unit (ADU) in Coral Gables, installed cost typically lands between $45,000 and $130,000 for an addition and $90,000 to $220,000 for a full ADU, depending on footprint, cladding run, and how much concrete and impact-rated glazing goes in. We install Boral-compatible systems across Coral Gables, and every project starts with a written, line-item price before any work begins. Most owners don’t start with the cladding. They start with a hairline crack in a Boral trim board or a soft spot near a downspout, then trace it back to a failing substrate, flashing, or fastening detail that was wrong from day one.
Key takeaways:
- Boral exterior trim and cladding is the part that fails first in Coral Gables heat and humidity, not the framing.
- Boral’s cellular PVC trim needs specific fastening and joint spacing that generic exterior trim rules skip.
- We’re an independent contractor, not affiliated with Boral. We source the correct part and install it right, with a written price up front.
Which Boral Models This Applies To

Boral runs several exterior product lines that show up on Coral Gables additions and ADUs: Boral TruExterior trim, Boral cellular PVC trim in its Versatex-style profiles and board widths, and Boral’s poly-ash siding and trim products. Each line has different expansion behavior, so the profile depth and fastener spec matter as much as the brand name.
To identify what you have, check three things: the back of any loose board for a manufacturer stamp, the board thickness (Boral trim commonly comes in ¾-inch and 1-inch nominal thicknesses), and the joint spacing at corners and windows. Boral poly-ash products expand and contract more along the length than cellular PVC, so a 16-foot run with a cold joint installed tight in cool weather can crack when it heats up. That thermal movement is the compatibility gotcha most generic trim installs get wrong.
For OEM-vs-aftermarket, Boral-branded trim and their matching fasteners and sealants are the safe match. Foam and PVC trim from other makers can visually substitute, but not uniformly: fastener pull-through strength and thermal expansion differ enough that mixing brands on the same elevation is how you get a callback. In Coral Gables, we spec Boral parts where the product run is the issue and match only same-family components, with the spec written into the scope before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
- Hairline cracks along a trim joint or corner. Boral poly-ash moves with temperature, and a tight cold-weather joint can split when Coral Gables afternoon sun hits it. The cause is joint spacing, not the board material.
- Soft, spongy spots near the base or behind a downspout. Boral PVC itself doesn’t rot, but the substrate or sheathing behind it can. If a trim board feels soft at the bottom edge, water is getting behind it and the fastening or flashing detail has failed.
- Paint peeling or blistering within a year of a fresh coat. Boral poly-ash holds paint well when the surface is dry before coating. Peeling this fast usually means moisture trapped behind the board or a coat applied over damp substrate in Coral Gables humidity.
- Visible gaps at the joint between trim and window or door. Boral trim needs a flexible sealant at the movement joint, not a rigid fill. A rigid bead cracks as the board moves, and the gap you see is the sealant failing, not the trim.
- Loose fasteners or pull-through marks. Boral-branded fasteners and the right spacing (often wider than generic trim) hold the board in place. Loose fasteners point to the wrong fastener type or spacing, common on retrofits where a generic nail was used.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Boral-clad addition or ADU in Coral Gables, the installed range runs $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a full ADU, using the same market-calibrated ranges we quote across the site. What drives the number: footprint and ceiling height, how much of the run is Boral trim versus siding, impact-rated glazing and doors, and how much concrete and site work the addition needs. If the scope is a trim or cladding repair on an existing Boral run, that’s priced separately and depends on board count and how much substrate needs attention behind it.
Every project gets a written, line-item price before a single tool comes out, and no number moves at the door. The written scope names the Boral parts, fasteners, and sealant by type, so you can see exactly what’s specified. Completed work carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check: look at the back of a loose board for the Boral stamp, measure the board thickness, trace any crack or soft spot to its joint, and photograph the joint spacing. What we don’t recommend: pulling trim on a hot Florida afternoon to chase a substrate issue, or re-coating a Boral board to hide a gap that’s really a flashing or fastening problem. Cladding failures trace back to the assembly behind them, and opening that up yourself in Coral Gables humidity can let more water in than it finds. That’s a job for a crew that reads the whole assembly, not just the surface. Call Bradford Remodeling at (833) 510-5367 to talk through the Boral scope and get a written price. We’re an independent service provider, not affiliated with Boral, and we source the right part for your model rather than carry a truckload of maybes.
FAQs

Boral cellular PVC trim is made to hold up outdoors for decades with normal maintenance, but the boards only last as long as the assembly behind them. In Coral Gables, the failure point is almost always the flashing, sealant, or fastening detail, not the Boral material. Get the joint spacing and fastener spec right, and the trim run outlives a wrong detail every time. Call (833) 510-5367 for an exact quote on your scope; estimates are free and written.
Often yes. A single cracked joint, a failed sealant line, or a few loose fasteners can usually be corrected without touching the whole Boral run. The decision point is the substrate: if the sheathing behind the board is soft, patching the surface delays the problem instead of fixing it. We price the repair separately from a replacement so you can see both numbers in writing. Call (833) 510-5367 to schedule a free estimate.
A trim and cladding repair on an existing Boral run typically runs a day or two, depending on board count and substrate condition. A full addition or ADU in Coral Gables takes weeks to months, driven by permit review, foundation work, framing, and the impact-rated glazing and door schedule. You get the timeline range in the written scope before work starts, so nothing about the schedule is a surprise at the door. Call (833) 510-5367 for an exact quote on your project.
We source Boral parts by product line, board width, and fastener family, and we match components only within the same Boral family so thermal expansion and pull-through strength stay consistent. You’ll see the part types and specs named in the written scope before any material is ordered. If a substitute is the only path, that’s your call in writing, not a swap made quietly on site. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












