







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Coral Gables Owner’s Guide
We install Boral-compatible windows and doors across Coral Gables, and the typical installed price runs $4,500 to $15,000 for a standard replacement, or $8,000 to $25,000 when you move to impact-rated units. When a Boral product fails, the symptom almost always shows up as water first: a dark stain spreading on the drywall under a corner, a sill that stays wet two days after rain, or a door that suddenly drags because the frame has swelled. In Coral Gables, that timeline compresses. Salt air off Biscayne Bay eats at hardware finishes, and the afternoon storms that roll through in June and September test every seal long before a window reaches the end of its rated life. Owners usually call us after a storm, not before one.
Which Boral Models This Applies To

Boral makes several window and door lines, and part numbers don’t cross between them. Before we order anything, we identify what you actually have by reading the label on the frame or sash, usually a small sticker in the jamb channel or on the glass edge, and by measuring the rough opening rather than the visible glass. A part that fits a Boral vinyl single-hung won’t drop into a clad casement, and hardware from a sliding patio door won’t match a hinged entry unit even when the finish looks identical.
For Coral Gables homes, the OEM-versus-aftermarket call matters more than it does inland. Original Boral hardware carries the coastal-rated finish spec, and a cheaper aftermarket handle or hinge often skips that coating. We’ve replaced aftermarket hardware on Coral Gables doors two years after installation because the finish pit out from salt exposure. Where a genuine Boral part is discontinued, we source a quality equivalent matched on dimensions, material and finish rating, and we tell you plainly which route we’re taking before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- Water staining at the interior corner or sill. The seal, weep system or glazing gasket has given out, and water is traveling behind the frame instead of draining out. Catch it early and it’s a seal job; wait and it’s substrate rot.
- A door that drags or sticks in humid months. The frame or slab has absorbed moisture and swelled, often because the finish on the bottom edge has failed. Coral Gables humidity accelerates this on wood-edge and clad products.
- Fogging between the panes. The insulated glass unit’s seal has failed and moisture is trapped inside. This can’t be cleaned out; the unit gets replaced.
- Pitting or chalky white residue on hardware. Salt air has broken down the finish, and the underlying metal is starting to corrode. Left alone, locks and hinges seize.
- Drafts or daylight at the frame. Weatherstripping has flattened or the frame has shifted, and the unit is no longer sealing against wind-driven rain, which matters in a hurricane zone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Coral Gables, window replacement runs $4,500 to $15,000, and impact window installation runs $8,000 to $25,000 depending on unit count, size and rating. A single failed seal or piece of hardware sits at the low end; a full-frame swap with impact glass sits at the top. What moves the number: whether we replace just the part, the sash, or the whole frame; the glass spec; and how much rot we find once the old unit comes out.
You get a written, line-item price before any work starts, and it doesn’t move at the door. Labor, materials and disposal are itemized. Every completed install carries our 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for the model label, measure the rough opening, and check whether the glass or just the hardware has failed. That tells you what you’re dealing with.
The install is where it goes wrong. Windows and doors are the building’s opening to wind-driven rain, and in a hurricane zone a badly seated unit or a missed flashing detail leaks for years before you see it. Frame and glazing work on a second-story opening also carries real fall risk; that’s trained-professional territory, not a weekend job. Boral is a manufacturer we install and service – we’re an independent provider, not affiliated with Boral. Call (833) 510-5367 and we’ll give you a straight range over the phone.
FAQs

Most Boral units are rated for 15 to 25 years, but in Coral Gables salt air and humidity push hardware and seals toward the shorter end unless finishes are maintained. Glass seals often fail first.
Sometimes. A failed seal, hinge or lock is a repair; fogged glass or a rotted frame is a replacement. We’ll tell you which one you have before quoting. Call (833) 510-5367 for an exact answer.
A single window or door is typically a one-day job; a multi-unit replacement runs two to four days. We confirm the timeline in writing with your quote.
We read your model label, measure the rough opening, and order the matching OEM part or a spec-matched equivalent. We don’t carry parts on a truck; we source the correct one for your unit.
We also work with KraftMaid, Cambria and Silestone on the interior side of these projects when a window or door swap is part of a larger remodel. Call (833) 510-5367 to schedule your free estimate – a written price, in your hand, before anything starts.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












