







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Coral Gables Owner’s Guide
We install and repair Boral-compatible roofing across Coral Gables, and a full Boral tile roof replacement here typically runs $8,000 – $20,000 depending on square footage, tile profile, and whether the underlayment gets replaced at the same time. Individual repairs land between $600 and $2,500. Roof work is scheduled, not same-day, because tile has to be matched and underlayment has to cure.
Owners usually find the failure the same way: a hairline crack in a tile after a summer storm, a brown ring spreading across a bedroom ceiling, or grit collecting in the gutter that turns out to be the surface of the tile breaking down. It rarely starts as a leak you can see from the ground. It starts small, in the field of the roof, and shows up inside a week or two later. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Boral.
Key Takeaways
- Full Boral roof replacement in Coral Gables: $8,000 – $20,000 installed.
- Targeted tile repair: $600 – $2,500, including matching and labor.
- Boral tile fails at the underlayment before the tile itself in South Florida heat and salt air.
- Every job gets a written price before work begins and the 365-Day Done Right Promise.
Which Boral Models This Applies To

Boral’s residential line covers a range of profiles, and the ones we see most on Coral Gables homes are the flat and low-profile concrete tiles (Saxony and Madera-class profiles), the barrel and S-profile clay and concrete tiles, and the synthetic slate and shake lines. The exact part you need depends on profile, dimensions, and color lot, and those don’t carry across product families. A Saxony field tile will not substitute for a barrel tile, and the wrong profile is obvious from the street.
To identify yours, look at three things. First, the profile: how the tile curves and interlocks at the edges. Second, the dimensions: field tiles vary by profile, and a tape measure across the flat face gets you close. Third, any stamp or mark on the back of a broken tile, which often carries the manufacturer and series. If you have a loose or broken piece, keep it. It’s the best identifier we have.
On the OEM-versus-aftermarket call for Boral specifically: matching an existing color lot from a discontinued or aged run is the hard part, not the tile itself. A quality aftermarket equivalent can work in a repair, but on a visible field it will read as a patch once the sun hits it. We source to match the roof you have, not the catalog page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Hairline cracks across the tile face. Thermal cycling, where Coral Gables roofs swing from afternoon sun to evening rain, stresses the tile. A crack thinner than a dime lets water past the tile and into the underlayment below.
- Granule or surface grit in the gutters. The top surface of a concrete tile sheds material as it ages. Grit in the gutter means the tile is wearing faster than it should, and the underlayment underneath is aging at the same rate.
- Ceiling stains or attic moisture after a storm. Water inside the house almost never means the tile failed first. It means the underlayment barrier underneath has reached the end of its life, and the tile was just the visible layer.
- Lifted or slipped tiles. Wind and settling fasteners let tiles shift out of course. Once a tile lifts, the ones beside it take more wind load and the pattern spreads.
- Moss, algae streaks, or dark staining that won’t wash off. South Florida humidity feeds biological growth in the shaded pitches. Persistent staining signals trapped moisture, not just dirt.
Replacement Cost & What’s Included

Here’s what the work runs in Coral Gables, as a written range before anything starts.
| Scope | Installed Range |
|---|---|
| Full roof replacement (Boral tile) | $8,000 – $20,000 |
| Roof repair (targeted) | $400 – $1,800 |
| Tile roof repair (matching, reset, or replace) | $600 – $2,500 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: square footage, roof pitch and access, how much of the field needs matching tile, whether the underlayment is being replaced, and whether permits and inspections are required on your block. Parts and labor are quoted as line items, so you see the tile cost separate from the install. Every completed job carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. The written price you sign is the price you pay.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checking is fine on your own. From the ground, with binoculars, you can spot cracked, slipped, or stained tiles, and you can note where the staining sits. You can look in the attic after a storm for moisture. Keep your feet off the roof, especially on Coral Gables’ older tile roofs, which crack under body weight and turn a small repair into a larger one.
Where DIY goes wrong: walking a tile roof without the right footwear and load distribution, resetting tiles with the wrong fastener or adhesive, and sealing a crack with caulk that traps water and hides the real problem until the ceiling shows it. Roof work is height work with a real fall risk, and water damage compounds fast in this climate. A trained professional on a tile roof is the safer and less expensive path. Call (833) 510-5367 and we’ll give you a written estimate before any work starts.
FAQs

The tile itself commonly lasts 30 to 50 years, but the underlayment beneath it is the real limit in South Florida, typically 15 to 20 years under sun and humidity. When you see interior leaks on a roof that age, expect the underlayment, not the tile, to be the part that failed.
Yes, in most cases a single failed tile or a small run can be repaired for $600 – $2,500 by matching profile and resetting or replacing. If the underlayment or a large field is compromised, a repair won’t hold and a partial replacement is the honest answer. We tell you which one your roof actually needs.
A targeted tile repair usually takes a few hours to a day, depending on access and how many tiles need matching. A partial replacement runs longer and is scheduled around weather. We’ll give you the timeline in writing with the estimate.
We identify the profile and color lot from a sample tile, your roof’s existing field, or the manufacturer’s specs, then source to match. We work from documented manufacturer specs so every part is traceable, and we tell you upfront when an exact match isn’t available and what the closest option looks like on the roof. Bradford Remodeling Co Coral Gables also handles KraftMaid, Cambria, and Silestone for interior projects.
Get a Written Price Before Any Work Starts
If your Boral roof in Coral Gables is cracking, staining, or leaking, call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. You’ll get a written, line-item price before a single tile comes off, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise on the work. A live person answers the phone 24/7. Part of the Garrison Partners family since 2004, held to The Garrison Standard: every price and every guarantee in writing, every time.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












