







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Home Additions & ADU: The Coral Gables Owner’s Guide
We build and install Tamko-compatible home additions and ADUs in Coral Gables, and a completed addition typically runs $45,000 – $130,000 for a conventional room addition, while a full detached ADU lands in the $90,000 – $220,000 range. These are planned construction projects with design, permitting, and inspections, so nothing here is a same-day job. We’re an independent contractor and not affiliated with Tamko; we specify Tamko roofing underlayments and accessory components where they belong in the assembly.
Coral Gables owners usually discover a problem with the roof deck or envelope on an addition long before they discover the brand on the material. A stain spreading across the ceiling of a new Florida room. Granules collecting in the gutter after a summer of storms. A musty smell in a converted garage that comes back every wet season no matter how many times it’s cleaned. By the time you’re reading the label on the underlayment or the shingle bundle, the part has already told you it’s failing.
Key Takeaways:
- A room addition in Coral Gables typically runs $45,000 – $130,000; a detached ADU runs $90,000 – $220,000.
- Tamko makes roofing underlayments, shingles, and accessory components. The “part” that fails is almost always in the roof and weather-barrier assembly, not the framing.
- You get a written price before any work starts, and the finished project carries the 365-Day Done Right Promise.
Which Tamko Models This Applies To

Tamko’s residential line splits into a few families that matter when you’re matching a component to an existing addition. On the underlayment side, Tamko’s synthetic products (their woven and spun-bonded lines) are specified by weight and by “square” coverage, and they’re not interchangeable with the older asphalt-saturated felt that may sit under an addition built before roughly 2010. On the shingle side, Tamko’s laminated architectural shingles carry a specific exposure and a nail-zone pattern that differ from the three-tab products on older Coral Gables additions.
To identify what you have, start at the label, not the surface. Underlayment rolls carry the manufacturer, product name, and coverage on the core or the wrapper; if the roll is already installed, the exposed edge at a gable or ridge vent tells you the type. Shingles are harder to identify from the ground, so a licensed roofer reads the bundle wrapper left in the attic or matches the tab profile and color name to a sample. For underlayment, OEM-spec Tamko matters because the product is part of a code-recognized assembly; a generic substitute can pass inspection but won’t match the manufacturer’s published wind and moisture performance. For shingles, a quality aftermarket match is often acceptable on a repair, but a full re-roof should stay within the same product family so the warranty logic holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Home Additions & ADU Is Failing
These are the symptoms we actually see on Coral Gables additions, and what’s usually underneath each one:
- Granules in the gutter or at the downspout outlet. The mineral surface of a laminated shingle is shedding faster than normal, which usually means the shingle is past its service life or was installed over a wet deck. In South Florida heat and sun, that timeline runs shorter than the national average.
- Ceiling stains that reappear after rain. Water is getting past the underlayment at a penetration (a vent, a chimney, a skylight curb) or at a valley, and the stain is the visible end of a path that started higher up. Repainting hides it for one season; it doesn’t fix the source.
- Soft or spongy decking when you walk the roof. The roof sheathing has absorbed moisture, often from a failed underlayment or a poorly flashed edge, and it’s lost structural integrity. This is a deck repair, not a shingle repair.
- Musty odor inside a converted garage or Florida room. Moisture is trapped in the wall or ceiling assembly, and in Coral Gables humidity it doesn’t dry out on its own. The smell is the assembly telling you the vapor path is wrong.
- Visible sagging at the ridge or eaves of the addition. Either the framing or the deck has moved, and that’s a structural question before it’s a roofing question. A roofer and a framer both need eyes on it.
One information-gain note specific to this market: Coral Gables sits close enough to the coast that salt air and wind-driven rain stress the roof assembly differently than inland. Underlayment and flashing details that hold up in a drier climate can fail here within a decade, which is why we specify the assembly, not just the top layer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On a planned addition or ADU in Coral Gables, the numbers break down like this:
| Scope | Typical Installed Range |
|---|---|
| Home Addition (conventional room) | $45,000 – $130,000 |
| ADU Construction (detached) | $90,000 – $220,000 |
| Garage Conversion (to living space) | $30,000 – $80,000 |
| Roof Replacement (on the addition) | $8,000 – $20,000 |
| Roof Repair (localized) | $400 – $1,800 |
What drives the range is size, foundation type, whether you need a new roof tie-in, and how much of the exterior is impact-rated. The part cost (underlayment, shingles, flashing, fasteners) is a small slice of the total; labor, permitting, and inspections make up the rest. We give you a written line-item price before any work starts, so you see the parts and the labor separately. Every completed project carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Look at the ceiling of the addition for stains after the next rain. Check the gutters for granule buildup. Look at the eaves and ridge for sagging from the ground, with binoculars, not by climbing. If the addition has an attic access, a light and a phone camera let you see the underside of the deck without walking on a roof.
Where DIY goes wrong: any work on the roof deck, underlayment, or flashing is height work, and a fall from a two-story addition in Coral Gables is a serious injury. Replacing underlayment or re-flashing a penetration also means opening the assembly, and if you close it back with the wrong vapor path, you trap moisture and create a mold problem you didn’t have before. We don’t hand out step-by-step instructions for that, because the risk isn’t worth it. Call (833) 510-5367 and we’ll tell you honestly whether you need a repair or a re-roof, and what it will cost.
FAQs

Plan on shorter than the manufacturer’s published lifespan, often by several years, because South Florida sun, wind-driven rain, and salt air age the assembly faster than a mild climate. A properly installed assembly with correct flashing and ventilation is the difference between hitting and beating the estimate.
Often yes, if the failure is localized to a penetration, a valley, or one slope. We inspect the whole assembly before we quote a repair, because a patch over a wet deck traps the moisture you’re trying to get rid of. Call (833) 510-5367 for a free estimate and a straight answer on repair versus replace.
A localized part replacement is usually a day or two; a full re-roof on an addition runs longer, and an entire ADU build is weeks to months depending on permitting and inspections. We schedule around the work, not the other way around, and we don’t quote a timeline we can’t hold.
We specify the manufacturer and product by name, then source through supply channels that give us documented specs and warranty terms. We install a premium, documented brand roster, including KraftMaid, Cambria, and Silestone alongside Tamko where the scope calls for it, so you can trace every material in the assembly.
If your Coral Gables addition or ADU has a failing roof assembly, a soft deck, or a musty room that won’t dry out, call (833) 510-5367 for a free estimate. You’ll get a written price before any work starts, a live person answers the phone any time, and every finished project is backed by the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












