A Bradford company - serving Coral Gables, FL
An open living room and dining area after a whole-home remodel
Tamko · Coral Gables

Tamko Windows & Doors in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The Coral Gables Owner’s Guide

We install and replace Tamko-compatible windows and doors in Coral Gables, and typical installed pricing runs $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units. Tamko’s window and door lines have been out of production for years, so most Coral Gables jobs pair a compatible replacement unit with new framing, flashing, and impact-rated glass rather than a like-for-like Tamko swap. Owners usually find out the hard way: a sash that won’t seat, a door that drags the threshold through the wet season, or glass that fogs between the panes with no visible crack.

Call (833) 510-5367

Which Tamko Models This Applies To

A whole-home remodel with the living, dining and kitchen areas opened up

Tamko built residential windows and doors under several product families through the 1990s and early 2000s before exiting the category. You’ll see them in Coral Gables homes from the Gables by the Sea and Country Club Prado neighborhoods, mostly in mid-century ranches and 1980s additions where a builder used Tamko vinyl single-hungs or sliding glass doors. Identifying your unit starts with the etched glass logo in the corner of the pane and the manufacturer label on the head jamb or door frame. Snap a photo of both, plus a tape measurement of the rough opening (the framed hole the unit sits in, not the visible glass), and you have everything needed to spec a match.

Here’s the decision point that matters: because Tamko doesn’t supply replacement parts new, an exact OEM match usually isn’t available. You’re choosing between salvaged OEM components (hit or miss on condition, and no warranty) and a quality aftermarket or full-unit replacement from a current manufacturer. For Coral Gables, we steer toward full-unit replacement framed to Florida impact standards, because a patch on a 25-year-old non-impact unit still leaves you with a non-impact unit. We’ve also installed KraftMaid, Cambria, and Silestone in these same homes, and the same sourcing discipline applies: documented brand, traceable specs, no guesswork.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

  • Fogging or condensation between the panes. The sealed insulated glass unit has lost its seal, letting moisture into the air gap. Once that happens the glass can’t be recharged; the unit gets replaced.
  • A door that drags or won’t latch. Usually a sagging hinge or a threshold that’s absorbed water and swelled. In Coral Gables humidity, wood-core thresholds and jambs take this hit first.
  • Drafty sashes or daylight around the frame. Worn weatherstripping and failed corner welds on vinyl frames. It’s also the cheapest thing to fix if caught before the frame itself cracks.
  • Cracked or brittle vinyl frame corners. UV exposure over 15 – 20 years makes PVC brittle, and Coral Gables sun is unforgiving. A cracked weld means the frame fails, not just the seal.
  • Water staining on the interior sill or drywall. Failed flashing or a bad seal at the rough opening, not the glass. Left alone it reaches the substrate and framing behind the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Installed window replacement in Coral Gables runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. What moves the number: unit count, whether you’re going impact-rated for hurricane code, the condition of the rough opening and flashing, and whether trim and interior finish need rebuilding. A single failed sash on an otherwise sound unit sits at the low end; a whole-room impact upgrade with new framing sits at the high end.

Every price is written before work starts, itemized for materials and labor, with no numbers that move at the door. Our technicians have up to 22 years of experience, and every completed install carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself: confirm the glass logo, measure the rough opening, and test whether weatherstripping or a hinge is the actual failure. What we don’t recommend is replacing a full window or exterior door unit on your own in Coral Gables. These are heavy, the work involves opening the building envelope, and correct flashing and impact-rated anchoring are what keep water out during a storm. A mis-installed unit doesn’t fail on day one; it fails two summers later when the substrate is already wet. Call us at (833) 510-5367 and we’ll diagnose it, price it in writing, and tell you honestly whether a repair or a full replacement is the right call.

FAQs

A walk-in shower with large-format tile and a built-in niche

How long do Tamko windows and doors last in Florida?
Expect 15 – 25 years for the frame and 10 – 15 for the sealed glass unit in South Florida’s UV and humidity. Coral Gables units past 20 years are usually on borrowed time for the glass seal even if the frame looks fine. Call (833) 510-5367 for an exact assessment and free estimate.

Can a failed Tamko window be repaired instead of replaced?
Sometimes. Worn weatherstripping, a sagging hinge, and a bad latch are all repairable. A fogged sealed unit or a cracked frame corner means replacement, since neither can be recharged or welded back to spec. Call (833) 510-5367 and we’ll tell you which one you’re facing.

How long does a window or door swap take?
A single window or door is typically a one-day job; a whole-room or whole-home project runs several days to a couple of weeks depending on count and framing. We schedule around your written scope, not a vague promise. Call (833) 510-5367 to get your written timeline and price.

How do you source a Tamko-compatible part?
Through a documented manufacturer match to your rough opening and model, not a salvaged guess. We spec the unit against measured dimensions and Florida impact requirements, and you get the brand and specs in writing before anything is ordered. Call (833) 510-5367 for your free estimate.

Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with Tamko.

Ready to stop guessing and get a real number? Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. You’ll get a written price before any work starts, background-checked uniformed technicians on the job, and the 365-Day Done Right Promise behind the finished work. A live person answers the phone 24/7.

Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch