







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Coral Gables Owner’s Guide
Tamko bathroom remodeling in Coral Gables typically runs $9,000 – $28,000 for a full bath and $5,000 – $12,000 for a small or guest bath, depending on whether you’re keeping the rough-in or moving plumbing. Every price is written down before any work starts, and the finished job carries our 365-Day Done Right Promise.
The failures usually announce themselves slowly. A homeowner in Coral Gables notices a soft spot near the tub apron, a grout line that keeps reopening, or a surface that reads fine at eye level and chalky up close. By the time a fixture pulls loose or a short wall starts to read “spongy” underfoot, water has been working on the substrate behind it for a while. That’s the moment this page is written for: you’ve got a failing surface or fixture, you want the right part matched correctly, and you want a straight price.
Which Tamko Models This Applies To

Tamko’s product lines cover roofing, waterproofing membranes and related building materials rather than finished bathroom fixtures, so “Tamko bathroom remodeling” in practice means the weatherproofing and underlayment layer that sits beneath your tile and around your wet zones – not a vanity or a toilet. The Tamko self-adhered waterproofing membranes and underlayments are the parts that matter in a Coral Gables bathroom, because that hidden layer is what keeps the tile job from failing after two rainy seasons. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Tamko; we install to the manufacturer’s published specifications and warranty the installation work ourselves.
Identifying the right membrane or underlayment starts with the label, not the screwdriver. Look for the product name and the roll or lot marking on the original packaging, the printed edge of the sheet itself, or the spec sheet the installer left behind. If no label survives, we measure the sheet width and thickness and match it against the current published spec for the line. On the OEM-versus-aftermarket decision: for waterproofing, we stick with the documented branded product whose printed spec matches your assembly. A cheaper generic sheet with an unclear spec is not worth the few dollars of savings when it’s buried under $9,000 – $28,000 of tile and fixtures.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
- Grout that keeps reopening along the floor-to-wall joint. That joint moves and cracks look cosmetic, but a repeating failure there usually means water is reaching the membrane behind the tile and the substrate is shifting. It is rarely a grout problem on its own.
- Soft or spongy floor near the tub or shower. Water has gotten past a failed seam or a gap in the waterproofing and is breaking down the substrate underneath. Push on it gently; if it gives, the layer below is already compromised.
- A musty smell that returns after cleaning. The sealed cavity behind the wall is holding moisture because the membrane layer isn’t doing its job at a seam or corner. Air freshener hides it; the cause stays put.
- Loose tile or a hollow “thud” when you tap it. A tile that has come unbonded has lost its bond to the substrate, often because the waterproofing or setting bed beneath it failed. Tap the field with a screwdriver handle; hollow spots map the area.
- Water staining or efflorescence on the wall below the bathroom. That’s the clearest signal water is traveling through rather than sitting on the surface. In Coral Gables, our humidity and near-daily summer rain turn a small membrane gap into a bigger problem faster than the product’s rated life would suggest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed bathroom remodeling in Coral Gables, including the waterproofing and underlayment layer done to Tamko specification, prices like this:
- Full bathroom remodel: $9,000 – $28,000
- Small or guest bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Vanity installation: $800 – $3,000
What moves the number: whether the rough-in stays or moves, how much wall and floor gets opened to reach failed waterproofing, and the finish level you choose. You get a written line-item price before any work starts – parts and labor listed separately, no numbers that move at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a year of completion, we return and correct it at no charge to you.
DIY or Call Us?
What you can safely do yourself: read the label on the original roll, measure the exposed sheet width at a removed baseboard, photograph the failed grout or seam, and tap tile to map hollow spots. That’s diagnosis, and it helps us quote accurately.
Where DIY goes wrong is at the membrane layer itself. Waterproofing is a system – seam overlap, corner treatment, and the bond to the substrate all have to be right, and a buried mistake doesn’t show up until it has quietly rotted the substrate and cracked the tile above it. That’s not something to learn on a live Coral Gables bathroom. The honest split: check and photograph it yourself, then hand the replacement to a crew. Call (833) 510-5367 and a live person picks up, day or night, to schedule a free estimate. We also work with KraftMaid, Cambria and Silestone for the cabinetry and surface side of the same room.
FAQs

A properly installed, branded membrane assembly typically holds up for 10 to 15 years and longer before it needs to be redone. In Coral Gables, our humidity and summer rain put more stress on the whole assembly, so a correct installation and a sealed shower are what earn that lifespan – a sloppy seam takes years off it.
Sometimes, yes – a single failed seam or isolated gap can be corrected without redoing the entire room. It depends on how far water has traveled. Once the substrate has softened or tile has come unbonded, a full replacement over the affected area is the only fix that holds.
A shower or tub surround replacement typically takes one to two weeks on site, and a full bathroom remodel takes two to four weeks, depending on how much tile and wall is opened. We put the schedule in writing before work begins, so you know what to expect.
We source the documented Tamko-spec membrane or underlayment whose printed spec matches your existing assembly, and we match the sheet width and thickness to what’s already there. You’ll see the line item and price in writing before any work starts. Call (833) 510-5367 for a free estimate – we’ll tell you what the right part is and what it costs.
The short version: you don’t have to guess which part your Coral Gables bathroom needs or what it should cost. You get a straight price in writing and a full-year guarantee on the finished work. Call (833) 510-5367 for a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












