







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Coral Gables Owner’s Guide
Tamko kitchen remodeling work in Coral Gables runs $14,000 – $45,000 installed, with most of our Coral Gables kitchen projects landing between $22,000 and $34,000 once cabinetry, surfaces, and labor are written into one line-item quote. Bradford Remodeling Co Coral Gables is an independent contractor and is not affiliated with Tamko; we install and finish Tamko-related kitchen specifications to the manufacturer’s written tolerances. You’ll usually find out something has gone wrong in stages: a cabinet door that won’t stay shut, a countertop seam that darkens at the edge, a backsplash joint that cracks along the same line after two or three Miami-Dade summers. The pattern matters more than the single symptom.
Which Tamko Models This Applies To

Tamko’s kitchen-relevant product lines mostly fall into countertop surfacing, edge profiles, and backsplash trim, and the model number is almost always on the fabrication sticker on the underside of the slab or on the back of the trim piece, not on the front face. Photograph that sticker before anything is removed from the wall. Matching the right replacement piece is a measurement job first, a brand job second: thickness (3/4 in and 1-1/4 in are the two standard fabricated slab thicknesses), edge profile (eased, bullnose, ogee, bevel), and colorway revision. That last one is the compatibility gotcha most Coral Gables owners miss. Tamko has revised color runs across years, and a piece stamped with the same color name from four years ago may not read as the same tone next to a fresh run under Coral Gables’ bright south-facing window light. Pull a physical sample and compare it against the slab before you order.
OEM versus aftermarket comes down to two things: exact colorway continuity and the fabrication spec inside the warranty. A genuine Tamko piece keeps the original colorway and the original edge profile on record. A quality aftermarket equivalent can cost 20-30% less and is often the right answer when the original color has been discontinued – but the fabrication still has to match the slab thickness and the adhesive spec, or the seam shows within a season. We specify the piece only after the sticker and the measurement agree. Where a client wants options across the full surface package, we work from a documented roster that includes KraftMaid, Cambria, and Silestone alongside Tamko-compatible specs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
In Coral Gables, kitchen failures track the climate more than the product name. High humidity, salt air off Biscayne Bay, and direct afternoon sun through glass block or impact windows all put stress on the same joints, seams, and sealed edges.
- A hairline crack along a countertop seam. Usually a fabrication adhesive that cured wrong or moved under thermal cycling. Seam cracks in Coral Gables almost always show up on the sink run or the run nearest a west-facing window.
- Dark staining at the backsplash joint. Water is wicking behind the caulk line and sitting against the substrate. Left alone, this reaches the cabinet uppers and the drywall behind them.
- Cabinet doors that drift out of alignment. Often not the hinges. Seasonal humidity movement in Coral Gables swells the door and shifts the reveal; if two or more doors do it in the same cabinet run, the box is out of square.
- An edge profile that feels sharp or chips at the corner. The edge was fabricated without a proper chamfer, or the original finish has worn thin at the most-used corner. Chips at the sink edge or the dishwasher opening are the common pattern.
- Grout or caulk that cracks within months of being redone. The joint is moving. Retopping the caulk hides it for a season and returns. The substrate or the framing behind it is what needs checking.
Replacement Cost & What’s Included

Here’s the Coral Gables range, quoted as installed work with the piece, the fabrication, and the labor on one written line:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the number is not the brand – it’s the substrate condition behind the piece, whether the edge profile has to be re-cut, and how much of the existing cabinetry can be salvaged. A countertop swap with a clean substrate sits at the low end. A countertop swap that reveals water damage behind the backsplash moves toward the middle or the top. Bradford writes the price before any work starts. No moving numbers at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year – a seam opens, a joint cracks – we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Photograph the fabrication sticker. Measure the slab thickness and the edge profile with a straightedge. Run a fingertip along the seam and note whether it’s proud or depressed. Nothing there is dangerous, and it makes the estimate faster.
What you shouldn’t do yourself: pulling a countertop off a cabinet run, cutting a slab to an edge profile, or reaching into a backsplash cavity that may have live wiring for an under-cabinet light or an outlet. That last one is a real hazard – a backsplash tear-out in a Coral Gables kitchen regularly exposes a switched circuit that isn’t where the old wiring diagram says it is. Countertop fabrication also isn’t a hand-tool job. The seam tolerance is measured in fractions of a millimeter. Our technicians have up to 22 years of experience on exactly this work, they’re background-checked and uniformed, and they arrive with the site protected and the scope in writing. Call (833) 510-5367 to schedule a free estimate.
FAQs

A properly fabricated and sealed Tamko surface holds 15-20 years in a Coral Gables kitchen. The variable isn’t the material – it’s the seam adhesive and the caulk joint. Re-seal the backsplash joint every 3-4 years and inspect the sink seam after each wet season. Call (833) 510-5367 for a free estimate if you’re seeing cracks or staining.
Sometimes. A single small chip at an edge can be filled and color-matched, and a hairline seam crack can be re-injected. What can’t be repaired is a slab that has cracked through the body, or a colorway that has been discontinued. Repair runs $800 – $2,500 as a backsplash-ranged job; replacement is the honest answer when the piece has failed structurally. Call (833) 510-5367 for a free estimate – we’ll tell you which one it is.
A countertop and backsplash swap runs 1-2 days on site once the fabricated piece is in. A full kitchen remodel with cabinetry runs 3-6 weeks. Coral Gables permit timelines can add time, and we pull the permits and handle the inspections. Call (833) 510-5367 for a free estimate and a written timeline.
We source from the fabrication sticker and the measured spec, not from the model name alone. That means photographing the sticker, measuring thickness and edge profile, and confirming colorway availability before anything is ordered. If the colorway is discontinued, we present a documented colorway match alongside a quality aftermarket equivalent with the factory spec. Call (833) 510-5367 for a free estimate – the quote is written and it doesn’t move.
Talk to Bradford Remodeling Co Coral Gables
If you’re staring at a failed countertop seam, a stained backsplash joint, or a cabinet run that’s drifted out of square, that’s the start of a quote, not a problem to sit on. Bradford Remodeling Co Coral Gables works to The Garrison Standard: every price in writing before a single tool comes out, background-checked and uniformed technicians on every job, and the 365-Day Done Right Promise on every completed project. A live person answers the phone, day or night. Call (833) 510-5367 for a free estimate on your Coral Gables kitchen.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












