A Bradford company - serving Coral Gables, FL
An open living room and dining area after a whole-home remodel
Atlas · Coral Gables

Atlas Windows & Doors in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The Coral Gables Owner’s Guide

We install and service Atlas windows and doors across Coral Gables, and the work almost always starts with a single failed part: a balance that gave out, a hinge that sagged, a weatherstrip that stopped sealing. Installed window replacement in Coral Gables runs $4,500 – $15,000 for a typical whole-house set, while impact window installation runs $8,000 – $25,000, and most hardware and weatherstrip repairs come in far below those numbers. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Atlas.

Call (833) 510-5367

Owners usually find the failure the same way. The window they’ve opened a thousand times suddenly won’t hold itself up, or it drops with a thump. A corner of the frame whistles when the wind turns. The door that used to glide now needs a shoulder to close. Atlas has been a Florida fixture for decades, and the parts are real hardware with real wear limits, not the flimsy tilts from the window-store aisle. Knowing the specific part, the model it fits, and the honest installed price is what turns a failing window or door back into a working one.

Which Atlas Models This Applies To

A finished basement family room with a media wall and wet bar

Atlas sells its windows and doors under several product families, and the part you need depends on which family and series you have. The windows are single- and double-hung, horizontal slider, and casement, and each one uses a different balance or hinge system. Patio doors run on either a sliding or a hinged frame, and the hardware between the two doesn’t interchange. The first step is identifying the series, which is printed on a label or etched into the glass’s edge, on the frame’s jamb, or inside the door’s lock stile. If the label is gone, measure the window’s opening height and width to the nearest eighth-inch and match those to the series chart in the original install paperwork.

Once you have the series, you face the OEM-versus-aftermarket decision. Atlas sells original parts through its dealer network, and those give you an exact fit and the manufacturer’s warranty on the part itself. Quality aftermarket equivalents exist for the most common balances, hinges, and weatherstrip, and they often cost less. They also sometimes fit a fraction of a millimeter off, which shows up as a window that doesn’t lock flush or a door that won’t seal a corner. For a Coral Gables house within a block or two of the [Coral Gables] coast or under a known wind-rated installation, I lean OEM. The frame was engineered for that part, and staying with it keeps the assembly’s performance intact. We source either, and we tell you which we recommend and why before we order.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

Here’s what a failing Atlas window or door actually looks like, and what’s behind it:

  • The window won’t stay up. Sash balances wear out, and a balance that has lost its tension lets the sash drop. In Coral Gables’s humidity, the balance’s internal springs corrode faster than the rest of the assembly, so a stuck-up or dropping sash is usually a balance problem, not a glass problem.
  • The sash is hard to slide. The rollers have flat-spotted, or the track has grit and corrosion buildup. Salt air and year-round humidity do this to window tracks, especially on ground-floor units.
  • The door drags or won’t latch. Hinges sag or the lock keeps slipping out of alignment. On a hinged patio door, a worn hinge throws the whole door out of square.
  • You feel air or see water at the frame. Weatherstrip has degraded and the seal has failed. A thin film of moisture at the sill after a heavy rain is the first sign.
  • The frame cracks, or the glass fogs between the panes. This is a structural failure, a seal breach in an insulated glass unit, or a crack that needs replacement rather than repair.

The first three are hardware problems, and they’re fixable. The last two are structural and need a full unit or glass replacement. Knowing which one you have is the difference between a service call and a replacement, and we tell you straight before quoting.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A powder room with botanical wallpaper and a stone sink

In Coral Gables, a hardware or weatherstrip service on an Atlas window typically lands at the low end of the window work we do, and a full replacement is a separate line. Window replacement in Coral Gables runs $4,500 – $15,000 for a whole-house set, and impact window installation runs $8,000 – $25,000. The price depends on how many windows, the series, whether the work is a repair or a full unit swap, and whether new frames or impact-rated glass go in. What’s in that price: the part, the labor, the removal of the old unit, the seal and weatherstrip, and the cleanup. What’s not: hidden line items that show up at the door. You get a written price before any work starts, and it doesn’t move.

Every completed window and door job carries the 365-Day Done Right Promise. If the repair or the replacement fails inside that year, we come back and correct it at no charge. The price range is a range because every house is different; the written quote you get is the number you pay.

DIY or Call Us?

A homeowner can safely check a few things: open and close the window to confirm the symptom, look at the label or measure the series, and clean a track that’s packed with grit. That’s the safe inspection. What we don’t recommend is pulling a sash balance or prying a hinge on a window that’s under tension or sealed into a wall. A balance under load can snap back, the glass can drop, and a door that’s been forced out of square can crack a jamb. Window and door hardware failures are repairable, but the wrong fix makes the frame the next thing to fail.

If your Atlas window or door has stopped working the way you need it to, call us. We’ll identify the series, tell you whether it’s a repair or a replacement, give you a written price, and put a background-checked, uniformed technician on the job. We work with the documented brand set that includes KraftMaid, Cambria, and Silestone for the interiors around these openings, so the door and the room it sits in get finished to the same standard.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA walk-in pantry with wood shelving

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch