







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Coral Gables Owner’s Guide
An Atlas kitchen remodeling project in Coral Gables typically runs $14,000 – $45,000 for a full kitchen, with cabinet installation alone at $4,000 – $13,000, and scheduling generally starts within a few weeks of a signed written scope. The Atlas name shows up on cabinetry and component lines rather than as a single product, so the number you land on depends on which Atlas series is in your kitchen and how much of the original layout is staying. Owners usually discover a problem the same way: a door that won’t stay closed, a drawer that rides rough in its channel, or a cabinet box pulling away from the wall after a humid Coral Gables summer. What felt minor in March is a sagging run of cabinets by September.
Which Atlas Models This Applies To

Atlas builds cabinet lines in framed and frameless construction, and the part you need is matched to the box, not to the door style. Framed boxes use face-frame hinges and a different bore pattern than frameless; ordering a frameless hinge for a framed Atlas box is the single most common mismatch we correct in Coral Gables kitchens. Pull one door and look for the manufacturer label inside the cabinet box or on the back of the door itself; it carries the series name and often a model or SKU string.
Measure before you call. Note the overlay (how much the door covers the frame), the hinge cup bore, and the door height and width to the sixteenth of an inch. Atlas ran several hinge generations over the years, and the mounting pattern changed between them, so a photo of the old hinge beside a tape measure saves a return trip. On the OEM-versus-aftermarket question: replacement doors, drawer fronts, and hardware from the original series are worth chasing when you want a color and grain match to the rest of the run. For hinges, slides, and shelf pins, a quality aftermarket equivalent that matches the bore and load rating performs the same job, and it’s often what we install when the original is discontinued. We’re an independent remodeling contractor and not affiliated with Atlas. We also work with KraftMaid, Cambria, and Silestone when a repair turns into a partial replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
- Doors that drift open or hang crooked. The hinge screws have stripped their bite in the particleboard or plywood box, usually after years of humidity cycling. That’s a hinge-plate or box-repair job, not a door problem.
- Drawers that ride rough or jump the track. The slide has lost its rollers or the cabinet side has swelled from moisture. Undermount slides fail quietly before they fail completely.
- Cabinet boxes separating from the wall. Anchor screws work loose, or the drywall behind them never held properly to begin with. In Coral Gables, we see this most in kitchens that took water during a storm season.
- Swollen or delaminating box panels near the sink and dishwasher. Particleboard core and sustained humidity don’t coexist well. Once the panel swells, it won’t go back.
- Doors out of alignment across a whole run. A single high or low cabinet can throw the whole line, and it’s often a sign the base cabinets settled unevenly on the floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Coral Gables, with parts and labor shown together so you can see where the money goes:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: how many cabinet boxes are being replaced versus repaired, whether the countertop has to come off to reach them, and the material you choose. A hinge and slide refresh on the existing Atlas run sits near the bottom of the cabinet range. A full tear-out and reinstall with new boxes and a Cambria or Silestone top pushes toward the top. You get a written price before any work starts, and every completed install carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely tighten a loose hinge screw, swap a shelf pin, or adjust a drawer slide’s tension screw. Those are homeowner-level fixes and we’d rather you try them first.
Where it goes wrong: re-anchoring a cabinet run to the wall, replacing a swollen box panel, or resetting a countertop to reach a cabinet. A base cabinet carries real weight, and a top that shifts can crack at the seam or drop onto a gas line or the dishwasher rough-in behind it. That’s the point to stop. If the work involves the wall anchors, the counter, or anything near a gas or water connection, it’s a job for a trained crew. Call (833) 510-5367 and we’ll tell you straight whether it’s a repair or a replacement.
FAQs

Expect 15 to 25 years from the boxes in this climate, with hinges and slides failing well before that. Coral Gables humidity is the variable: kitchens with a dishwasher that vents into the cabinet run, or a sink wall that’s taken water, wear faster than the rest of the room.
Often, yes. Hinges, slides, shelf pins, and door alignment are repairable without touching the box, and that’s the cheaper path when the cabinet structure is sound. A swollen or delaminated box panel is the line where repair stops making sense. Call (833) 510-5367 for an exact quote, and the estimate is free.
A hardware and alignment refresh is usually a single day. Replacing a run of cabinet boxes or resetting a countertop runs several days to a couple of weeks, and you’ll have the schedule in writing before we start.
We identify the series from the label and bore measurements, then pull the matching OEM part or a spec-matched equivalent. We don’t stock parts and don’t carry them on a truck. Your written quote names the part, the source, and the installed price before any work begins.
Have an Atlas cabinet that’s failing and a Coral Gables kitchen that needs a straight answer? Call (833) 510-5367 for a free estimate. We’ll put the price and the scope in writing before a single tool comes out, and the live person who answers can schedule you on the spot.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












