







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Home Additions & ADU: The Coral Gables Owner’s Guide
A CertainTeed-built addition or ADU in Coral Gables typically runs $45,000 – $130,000 installed, with the component that failed often representing $800 – $4,500 of that total as a standalone repair. If you’re pricing a full assembly, that lead range covers permitting, structural tie-in, roofing and envelope, and finishes. If you’re replacing a single failed piece, the range narrows fast. We install CertainTeed-compatible additions and ADUs and give a written price before any work starts.
Owners usually find out the hard way, not through a dramatic collapse. It surfaces in a slow drip through a new junction, a stain at a roof tie-in, or a soft spot where the addition meets the original structure. In Coral Gables, the trigger is almost always the rainy season: a seam that looked fine in February becomes a ceiling stain by August.
Key Takeaways
- Installed range for a full CertainTeed addition or ADU in Coral Gables: $45,000 – $130,000.
- Component-level failures often trace back to envelope tie-in, fasteners, or flashing at the junction.
- Every Bradford project gets a written price and the 365-Day Done Right Promise.
- We’re an independent contractor, not affiliated with CertainTeed.
Which CertainTeed Models This Applies To

CertainTeed additions and ADU components aren’t a single product with one part number. The line covers roofing, siding and envelope products, and a lot of failures trace back to one of them at the addition’s exterior. To identify what you have, start with the label on the packaging of the failed piece, or pull the original submittal or permit drawings from the Coral Gables building department, which lists the specified product. Measure the exposed face and any overlap; CertainTeed siding profiles run in fixed dimensional ranges, and a 6-inch vs. 8-inch exposure will tell you which line you’re dealing with.
The OEM-versus-aftermarket decision matters here more than on some parts. CertainTeed-branded flashing and fasteners are matched to their siding and roofing systems to keep warranty intact. Aftermarket equivalents can work, but never on the weather-tight junction without checking the manufacturer’s spec first. When we quote a replacement, we list whether the part is CertainTeed-branded or a spec-matched equivalent so you know exactly what’s going on your addition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Home Additions & ADU Is Failing
- Water staining on ceilings or walls near the addition seam. This usually points to flashing failure or a backed-out fastener at the roof-to-wall junction. In Coral Gables, it shows up first after a heavy summer storm.
- Soft or buckled siding panels. CertainTeed siding in South Florida takes a beating from sun and salt air; panel edges that curl or feel spongy mean moisture is trapped behind the envelope.
- Loose or protruding fasteners. A backed-out nail or screw at the tie-in lets water in over time. It’s a small fix done early and a much bigger one done late.
- Drafts or temperature swings in the addition. If the new space can’t hold its temp like the rest of the house, air sealing at the junction is likely compromised.
- Visible gaps at the wall/roof intersection. Even a hairline gap can channel water into the structure. In Coral Gables’s humidity, that gap accelerates rot faster than most owners realize.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Replacing a failed CertainTeed addition or ADU component in Coral Gables runs $800 – $4,500 for a targeted repair, while a full assembly build stays in the $45,000 – $130,000 range. The driver is scope: how much of the envelope is affected, whether the structural tie-in needs rework, and whether permits are required. Your written price itemizes parts and labor separately so you can see where the money goes.
| Scope | Installed Range (Coral Gables) |
|---|---|
| Component repair (flash, fastener, panel) | $800 – $4,500 |
| Full addition build | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
All installed work carries the 365-Day Done Right Promise: if it fails within the year, we return and correct it at no charge. Permits are pulled and inspections passed as part of the price.
DIY or Call Us?
An owner can safely inspect for water stains, feel for soft panels, and check for backed-out fasteners from the ground. Where DIY goes wrong is the actual envelope work: resealing a roof-to-wall junction without the right flashing system traps moisture instead of keeping it out, and that failure may not show for months. CertainTeed-branded components have specific install specs, and getting them wrong voids the manufacturer warranty in most cases.
We’re a licensed, insured contractor, and every Coral Gables job starts with a written price. If you’re not sure whether the issue is a simple fastener or a flashing failure, call us for a free estimate before you touch anything.
FAQs

How long does a CertainTeed addition or ADU last in Coral Gables? A properly installed CertainTeed assembly should hold 25 – 30 years or more, but Coral Gables’s sun, humidity and salt air shorten that if flashing or fasteners aren’t right. Annual visual checks at the junction are the single best way to protect the lifespan.
Can a failed CertainTeed component be repaired instead of replaced? Often yes. A backed-out fastener or local flashing failure is a targeted repair in the $800 – $4,500 range; whole-panel or full-junction replacement only becomes necessary once moisture has reached the substrate. Call for a free inspection to know which situation you’re in.
How long does the swap take? A targeted component repair in Coral Gables usually runs days, not weeks, once materials are on site. A full addition or ADU is scheduled work measured in months, with the timeline written into your contract.
How do you source the part? We source CertainTeed-branded components or spec-matched equivalents depending on what the assembly calls for, and we tell you which it is in the written quote. We don’t claim to stock parts locally; sourcing is confirmed at estimate.
Will the price change once work starts? Not with us. The written price is the price. If unforeseen structural damage shows up after opening the wall, we document it and give you a revised written price before proceeding, no surprise numbers at the door.
Call (833) 510-5367 to schedule your free estimate. We also work with KraftMaid, Cambria and Silestone on interior finishes, and a live person answers the phone around the clock.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












