







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Coral Gables Owner’s Guide
If your Sterling addition or accessory dwelling unit has failed a component – a settling slab, a leaking tie-in, a window or door that no longer seals – we install Sterling-compatible replacement components in Coral Gables, and a typical whole-project home addition runs $45,000 – $130,000 while a full ADU build runs $90,000 – $220,000. Call (833) 510-5367 and a live person answers, day or night. We are an independent remodeling contractor, not affiliated with Sterling. Most Coral Gables owners find the problem the same way: a hairline crack at the new-to-old wall joint, a musty smell after summer rain, or a door in the addition that suddenly sticks in March.
Key Takeaways
- Home additions in Coral Gables: $45,000 – $130,000 installed. ADUs: $90,000 – $220,000.
- Additions are a written-scope build, never a same-day repair – anyone promising otherwise is selling you something.
- Every completed project carries the 365-Day Done Right Promise: if the work fails inside the year, we return and correct it at no charge.
- You get a written line-item price before any work starts. No numbers that move at the door.
Which Sterling Models This Applies To

Sterling addition and ADU products break into modular room additions, sunroom and enclosed-porch lines, and detached or attached ADU shells. The exact line on your project appears on the data plate affixed to the structure’s frame or on the original drawings and permit set. That plate carries the model and series designator, and it’s what we match against when sourcing a compatible component. Skip guessing: the plate and the permit drawing tell you the model without a phone call.
The compatibility gotcha in South Florida is wind rating, not the model number. Miami-Dade and Coral Gables sit in the High Velocity Hurricane Zone, and a window, door, or roof panel that fits a Sterling shell sold in a lower-wind market may not carry the impact rating the local code requires. We verify the component’s rating before it’s ordered. A part that fits but doesn’t meet code is a failed inspection waiting to happen.
OEM vs. aftermarket for Sterling: OEM replacement panels and windows match the original profile and finish, and they’re the safe choice when the part is visible. For hidden structural ties, fasteners, and flashing, a quality aftermarket equivalent that meets the same spec is a defensible, often less expensive call. We tell you which side of that line each part falls on, in writing, before we order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
- Cracks along the new-to-old wall joint. The addition and the original house settle at different rates, and Coral Gables’ high water table and limestone-influenced soils make that movement worse. A widening crack signals the tie-in is working loose.
- Moisture or musty smell after a summer storm. Wind-driven rain finds failed flashing or a compromised roof-to-wall junction. Left alone, it reaches the framing and the interior finishes.
- Doors and windows that stick seasonally. A door that binds in warm, wet months and frees up in dry weather points to a shell that’s shifting or a frame that’s taking on water.
- Condensation or fogging inside an impact window. A failed seal on the insulated glass unit, common after a decade or two in the Florida sun. The window no longer performs and needs replacing.
- Soft or spongy floor near an exterior door. Water entering at the threshold. The substrate under the finish floor is degrading, and it won’t fix itself.
Replacement Cost & What’s Included

Replacement work on a Sterling addition or ADU in Coral Gables is priced inside the project ranges below, and every quote is written line by line before work starts.
| Project | Installed Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: the size and footprint of the addition, whether it’s an attached room or a full detached ADU, the impact-rating of the windows and doors required by code, and how much existing structure needs repair before new work goes in. Permits and inspections are part of the written scope. The finished work is covered by the 365-Day Done Right Promise, and we return to correct anything that doesn’t hold inside that year at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely inspect and document: photograph the cracks, check the data plate, note where water is entering, and test a sticking door. What you should not take on yourself is the structural and envelope work – tie-ins, flashing, and impact-rated window and door replacement. Those are where DIY goes wrong. A flashing detail done by hand without the right materials will leak, and a badly set structural tie can compromise the whole addition. This isn’t a job for a weekend and a caulk gun. Call (833) 510-5367 for a free estimate, and we’ll walk what’s failing with you and put a written scope on paper.
FAQs

Plan on 15 to 25 years for impact windows and doors before the glass seal goes, and 20-plus years for a properly flashed addition roof. The South Florida sun and hurricane-season wind-driven rain age exterior components faster than in a dry climate. We’ll tell you the realistic lifespan of any part we quote, and the finished work is backed by the 365-Day Done Right Promise.
Sometimes. A hairline crack at the tie-in can often be sealed and monitored, and a localized roof leak can be repaired rather than re-roofed. A failed window seal or a soft, water-damaged substrate cannot be repaired – those need replacement. We inspect before recommending either path. Call (833) 510-5367 and estimates are free.
A single window or door replacement is typically a day. Structural tie-in repairs run several days, and a partial addition rebuild or ADU component replacement spans weeks, depending on scope and permit review. You get a written schedule with the written price. Additions are never same-day work, and we won’t tell you otherwise.
We match the component to your Sterling model from the data plate and permit drawings, verify the impact rating for the High Velocity Hurricane Zone, and source OEM or a spec-matched equivalent – whichever fits the job. We don’t stock parts or carry them on a truck; ordering is per project, and you’ll see the part and its spec in the written scope. Call (833) 510-5367 to start the match.
Get a Written Price on Your Sterling Project
Bradford Remodeling Co Coral Gables is an independent remodeling contractor serving Coral Gables with home additions, ADU work, and garage conversions, plus kitchen and bath remodeling using documented brands like KraftMaid, Cambria, and Silestone. Every homeowner gets a written price before work starts, a background-checked crew, and a live person on the phone at any hour. Call (833) 510-5367 to schedule your free estimate and get the scope and the number in writing.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












