







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Coral Gables Owner’s Guide
Schluter driveway and paver work in Coral Gables typically runs $7,000 – $18,000 installed for a paver driveway and $3,500 – $11,000 for a paver patio, and we schedule these as planned projects, not same-day emergencies. If you’re here because a paver edge, joint profile, or drainage detail has started moving, we can give you a written price before any work starts. Most Coral Gables owners first notice the problem at a specific spot: a paver lifting at the driveway apron after heavy rain, a sand joint washing out toward the swale, or a Schluter profile that has cracked where the paving meets the garage slab. We’re an independent contractor and not affiliated with Schluter, but we install their profiles and accessories by the manufacturer’s spec.
Which Schluter Models This Applies To
Schluter’s paver and driveway work usually comes down to their edge and joint profiles: the TREP family for stair and step edges, the SCHIENE and DILEX lines where paving meets a slab or wall, and the DITRA-type drainage matting under patios that sit close to the house. Model numbers aren’t stamped on most profile faces, so the surest identification is the packaging label if you still have it, or a measurement: profile height in millimeters (most driveway-grade profiles are 8mm, 10mm, or 11mm), the leg depth, and the finish. Bring us a photo with a tape measure against the profile and we can match it. On the OEM question: Schluter profiles have tolerances that matter, especially where the joint has to stay watertight under a driveway edge that gets loaded. A bargain equivalent may look identical and fail at the anchor leg. For exterior paving in South Florida, we install the genuine Schluter profile and tell you why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
- Sand joint washing out after a storm. Coral Gables sits on limestone and gets heavy summer rain; a paver joint that loses sand within a season usually points to a missing or undersized edge restraint and insufficient drainage pitch, not bad pavers.
- A profile cracking where paving meets the garage slab. That’s a thermal-movement problem. The profile was likely set without the expansion allowance the slab needs as it heats and cools.
- Pavers lifting at the driveway apron. Water is getting under the edge and pushing the base. The profile anchor leg has probably lost its bond.
- A visible gap or gap forming along a wall or step edge. The profile leg has pulled loose, and the joint is now open to water intrusion.
- Rocking pavers near the profile line. Failed bedding under the edge; the profile is holding one end while the base moves under the other.
Replacement Cost & What’s Included

Owner-reported installed prices for this work in Coral Gables:
| Scope | Price range |
|---|---|
| Paver driveway installation (with Schluter edge profiles) | $7,000 – $18,000 |
| Paver patio installation (with drainage profiles) | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves the number: driveway square footage, whether the base needs rebuilding, the number of edge profiles required, drainage corrections, and whether the old paving has to come up. The profile itself is a small line item; the labor and base preparation are what fill the range. Our written price breaks these out line by line before any work starts, with no numbers that move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails within that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the joint line: walk the edge with a flashlight after a storm, look for sand loss, rocking pavers, or a profile that has lifted, and photograph it with a tape measure against the profile. What we don’t recommend is resetting the base or re-anchoring a profile yourself. The failure almost never lives in the paver you can see; it’s in the base and the edge restraint underneath, and a patched top will fail again within a season. Our technicians have up to 22 years of experience with paving and edge profiles on Coral Gables properties, and we work with a documented roster of premium brands, including Belgard and Unilock for hardscaping. Call (833) 510-5367 to schedule your free estimate.
FAQs

With proper base preparation and drainage, a paver driveway with Schluter edge profiles should hold for 20 to 30 years. In Coral Gables, the practical limit is usually the base and the drainage, not the paver or the profile; water under the edge is what shortens the life. Call (833) 510-5367 for an exact quote, and estimates are free.
Sometimes yes, but only if the base and edge restraint underneath are sound. If the profile leg has pulled and the bedding is intact, we can reset it; if water has worked under the edge, the base comes up. We’ll tell you which one it is before any work starts. Call (833) 510-5367 to schedule an assessment.
A single profile replacement is a half-day to a full day, including resetting pavers and re-setting the joint. A full driveway or patio with base correction runs three to seven days depending on square footage and drainage work. Your written scope lays out the schedule up front.
We order the correct Schluter profile to the measured height and leg depth through supplier channels and confirm the label and spec before installation. We don’t carry parts on a truck and we don’t stock Schluter locally; the part is ordered to your job. Bradford Remodeling is a Garrison Partners family member, and we also work with KraftMaid, Cambria, and Silestone on the surfaces side of the job. Call (833) 510-5367 to schedule your free estimate.
Contact
If your Coral Gables driveway or patio is showing a failed profile, lifting pavers, or a joint that keeps washing out, call (833) 510-5367 to schedule your free estimate. We’ll write the price before any work starts, confirm the part against your measurement, and stand behind the finished work for a full year under the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












