







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Coral Gables Owner’s Guide
Schluter kitchen remodeling in Coral Gables runs $14,000 to $45,000 installed, and the waterproofing and trim systems Schluter is known for are the parts that decide whether that money lasts. We install to Schluter’s published specs with a written price before work starts and the 365-Day Done Right Promise behind every job. Coral Gables owners usually discover a system failure the slow way: a soft spot near the sink base, grout that keeps re-cracking along a countertop seam, or a faint musty smell under the cabinet run after a summer storm.
Which Schluter Models This Applies To

Schluter’s kitchen-relevant line is broader than most homeowners expect. It covers waterproofing and uncoupling membranes (KERDI, DITRA, DITRA-HEAT), edge and transition profiles (SCHIENE, RENO-U, JOLLY), the KERDI-BOARD building panels used for backsplash substrates and island wraps, and KERDI-LINE linear drains where a wet bar or prep sink is involved. Identifying the right piece starts with what’s printed on the roll flange or the profile’s side leg: the product name and a size code are molded or printed there. Measure the profile’s visible face height and its anchoring leg, not just the length. Coral Gables homes often mix 3/8-inch and 1/2-inch substrates within the same kitchen, so a single profile size rarely covers an entire run.
The OEM-versus-aftermarket call matters more for Schluter than for cabinet hardware. Schluter’s systems are engineered as a set: membrane, thin-set, drain flange, and profile are tested together and carry a limited warranty only when the full assembly is genuine. Aftermarket lookalikes may fit the slot but void that coverage. We are an independent contractor and not affiliated with Schluter; we buy genuine material for every spec we install. The cabinet and surface side of the same job is traceable too, with KraftMaid, Cambria, and Silestone among the documented brands we work with.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
Waterproofing and trim failures in a Coral Gables kitchen rarely announce themselves. These are the five we find most often:
- Grout cracking along the backsplash-to-counter seam. Usually movement, not grout failure. The joint needs a flexible sealant, and if the substrate behind it is KERDI-BOARD that was never properly banded, water is already tracking behind the tile.
- Soft or swollen cabinet toe-kick or base near the sink. A breached KERDI seam or a missing inside corner band lets water reach the framing. By the time the wood swells, the leak is months old.
- Musty smell under the cabinet run after rain. In Coral Gables, high humidity and afternoon storms push vapor into any gap in the waterproofing assembly. A smell with no visible water is a membrane problem until proven otherwise.
- Tile lifting or hollow-sounding over a DITRA bed. A bad thin-set bond or a membrane installed without the correct fleece contact. The tile feels solid at the edge and drums in the field.
- A profile leg popping free at a countertop edge or floor transition. Anchoring leg too short for the substrate thickness, or fasteners that pulled. The profile is cosmetic until someone catches a toe on it, then it’s a trip hazard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the work around these systems in Coral Gables, with parts and labor shown together:
| Scope | Installed range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation | $800 – $2,500 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on square footage, whether the substrate has to be reopened to correct the waterproofing, and what profile and membrane series the spec calls for. Our written price is line-itemed before any tool comes out, parts and labor listed separately, and it does not move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Press along the backsplash seam and toe-kick for soft spots, look at whether the profile legs sit flush, and note where grout is cracking versus where tile is actually loose. What you should not do is cut out a membrane or re-band a KERDI seam on your own. A waterproofing assembly is a system: one wrong thin-set or an unbanded corner and the leak simply moves. The same caution applies to anything behind a cabinet run where water and framing meet. Our technicians have up to 22 years of experience and we answer the phone around the clock. Call (833) 510-5367 to schedule your free estimate.
FAQs

A correctly installed KERDI or DITRA assembly should hold for the life of the tile, but Coral Gables humidity and storm-season moisture shorten that if any seam is compromised. Expect decades from a sound install and a much shorter window from a rushed one. Call (833) 510-5367 for an exact quote; estimates are free.
Sometimes. A popped profile or a cracked sealant joint is a straightforward repair, while a breached membrane behind tile usually means removing and redoing that section. We’ll tell you which one you’re looking at before any price is set. Call (833) 510-5367 to schedule your free estimate.
A profile or trim replacement is often a day’s work; a membrane correction behind a backsplash typically runs two to four days depending on tile removal. We give you the timeline in writing with the price. Call (833) 510-5367 for an exact quote; estimates are free.
We buy genuine Schluter material to the spec on your job, not aftermarket equivalents that void the system warranty. The written price shows the part and the labor as separate lines so you can see what you’re paying for. Call (833) 510-5367 to schedule your free estimate.
Whether your Coral Gables kitchen needs a single profile corrected or the whole waterproofing assembly rebuilt behind the tile, the next step is the same: a written price and a clear scope before anything moves. Call (833) 510-5367 for a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












