







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Coral Gables Owner’s Guide
When a Coral Gables home addition or ADU built around American Standard materials starts failing, the fix runs $45,000 – $130,000 for a full replacement build, with targeted repairs priced against the failed component instead of the whole scope. We install and warranty American Standard-compatible additions and accessory dwelling units, and we walk every homeowner through a written price before a single tool comes out. Bradford Remodeling Co Coral Gables is an independent contractor, not affiliated with American Standard.
Owners usually notice it the same way: a soft, spongy floor near a sliding glass door after a wet summer, a hairline crack that keeps reopening above a window frame, or a bathroom wall in the back of the new wing that starts reading damp on a moisture meter. In Coral Gables, where the summer humidity sits above 80% for months and afternoon storms roll off the Atlantic, those symptoms almost always trace back to moisture intrusion or a material that wasn’t rated for the coastal exposure.
Key Takeaways
- Full American Standard-compatible addition replacement in Coral Gables runs $45,000 – $130,000; ADU construction runs $90,000 – $220,000.
- The failures we see most are moisture-driven, not cosmetic. Coral Gables’ salt air and afternoon storms expose any weak point in flashing, substrate, or sill detail.
- Every completed project is backed by the 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge.
- You get a written, line-item price before work starts. No numbers that move at the door.
Which American Standard Models This Applies To

American Standard doesn’t market home additions or ADUs as a single product line, so the “model” question here is really about the components. If you’re matching a failed part, start with the label or stamp on the component itself. American Standard plumbing fixtures carry a model number on the tank lid underside or the bowl rim; American Standard HVAC equipment carries the model and serial on a plate on the outdoor condenser cabinet and inside the air handler. Match the full model number, not just the series prefix. A toilet tank that reads “Cadet” but ends in a different suffix can use a completely different fill valve, and an HVAC condenser from the same series can run a different refrigerant charge depending on the build year.
OEM versus aftermarket is a real decision, not a marketing one. For the flush valve, fill valve, and trip lever on an American Standard toilet, quality aftermarket parts (Fluidmaster, Korky) work fine and cost $12 – $35 versus $30 – $90 for OEM. For an American Standard heat pump or air handler, OEM matters more: the refrigerant charge, expansion valve, and control board are matched to the specific model, and aftermarket substitutes can shorten compressor life. We document the exact model and part number on the written scope before any order is placed. If your scope also touches cabinetry, surfaces, or fixtures, we work through a documented brand roster including KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
- Soft or spongy flooring near exterior doors and thresholds. The substrate (the structural layer under your finish floor) has taken on water, usually from a failed sill pan or flashing detail. In Coral Gables, a single missed flashing lap in a summer storm can saturate an entire wall cavity within one rainy season.
- Recurring hairline cracks above windows and door frames. These point to differential movement between the addition and the original structure. If the addition was tied in without a proper expansion joint or if the foundation settled unevenly, the drywall will keep cracking no matter how many times it’s patched.
- Persistent musty smell or elevated moisture readings inside the addition. That’s active moisture, not stale air. The source is usually a roof-to-wall transition, a window perimeter, or a bathroom vent that terminates into the attic instead of through the roof.
- Water staining on ceiling drywall near the addition’s roof line. Staining means water has already traveled through the roofing material. In Coral Gables’ wind-driven rain, a small gap at a valley or a step flashing can push water sideways under shingles that look intact from the ground.
- Doors and windows in the addition that stick or no longer latch. This is a structural signal. Either the header has deflected or the framing has shifted. On an American Standard-branded sliding door, a track that has pulled away from the jamb often points to movement in the rough opening behind it.
Replacement Cost & What’s Included

Home addition replacement in Coral Gables runs $45,000 – $130,000. ADU construction runs $90,000 – $220,000. Those ranges include labor, materials, permit fees, and inspection coordination.
| Scope | Installed Range (Coral Gables) |
|---|---|
| Home addition (full build or rebuild) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion (common ADU path) | $30,000 – $80,000 |
| Roof repair on the addition | $400 – $1,800 |
| Tile roof repair (typical in Coral Gables) | $600 – $2,500 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: square footage, whether you’re rebuilding on the existing foundation or starting fresh, impact-rated glazing required under Florida wind code, and how much of the existing structure can be salvaged. Every project gets a written price before any work starts. The 365-Day Done Right Promise covers the completed work for a full year: if it fails inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things: check the moisture reading with a $20 pin meter at the base of walls and around door frames, inspect the attic for daylight or water staining, and photograph any crack progression over a few weeks. That information is genuinely useful to a contractor.
The line gets crossed on anything structural or moisture-related. Re-flashing a roof-to-wall detail, replacing a sill pan, or re-framing a header are not homeowner jobs. Getting them wrong means water gets back into the wall cavity and the damage compounds through another Coral Gables rainy season. If a sliding door track in the addition has pulled loose, don’t just re-anchor it into soft wood. That movement has a cause behind it. Call (833) 510-5367 and we’ll tell you what we’re seeing and put a written price in front of you before anything starts.
FAQs

A properly built addition using impact-rated glazing and coastal-grade substrate holds up 30 – 50 years in South Florida. ADUs built to current Florida Building Code with wind-rated roof connections and proper water-resistive barriers last the same. Lifespan depends entirely on whether the moisture details were done right.
Often yes, if the structural framing and foundation are intact. Roof repair runs $400 – $1,800, tile roof repair $600 – $2,500, and impact window replacement $8,000 – $25,000. If the framing has rot or the foundation has settled, partial repair is throwing good money after bad. Call (833) 510-5367 for a free estimate: we’ll tell you directly which one you’re looking at.
A garage conversion runs 6 – 10 weeks. A full home addition runs 3 – 5 months depending on scope and permit cycle. ADU construction from permit to final inspection typically runs 4 – 7 months. Coral Gables permit review adds time on top of construction. Call us and we’ll give you a realistic calendar, not a best-case one.
We work through a documented roster of brand-name materials with traceable manufacturer specs, so the part number and warranty are on the written scope before we order. That matters most on American Standard plumbing fixtures and HVAC equipment, where an aftermarket substitute that looks similar can fail faster. Our technicians have up to 22 years of experience matching the right part to the right model.
Get a Written Price for Your Coral Gables Project
You’ll have a written price before any work starts. Every completed project carries the 365-Day Done Right Promise: if it fails within a year, we return and fix it at no charge. Calls are answered by a live person. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












