







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Home Additions & ADU: The Coral Gables Owner’s Guide
We build home additions and ADUs in Coral Gables, and installed projects run $45,000 – $130,000 depending on square footage, structural scope, and finish level. There’s no “Delta part” that fails on these builds the way a cartridge does in a faucet. What fails is the plan: an unpermitted addition, a retired contractor mid-build, an ADU drawn to a template from another city. Owners discover it when an inspector stops the job or a lender won’t appraise the unpermitted space.
We’re an independent service provider. We’re not affiliated with Delta, and we don’t sell their products. We build to The Garrison Standard: a written, line-item price before demolition, and a full-year written guarantee on the completed work.
Which Delta Models This Applies To

Delta doesn’t make additions, so compatibility runs the other way. If you’re pairing a Delta-built structure or prefab unit with site work, or matching new fixtures into an existing Delta-spec’d suite, the details that decide fit are the ones in the spec sheet: footprint dimensions, wall thickness, roof pitch and soffit depth (the underside overhang of the roof edge), and load path.
Here’s how to identify what you actually have:
- Pull any permit history from the Coral Gables Building Division before you measure anything; the approved drawings tell you the real dimensions.
- Measure interior clear dimensions, not exterior walls. A 2-inch error compounds at every corner.
- Photograph the label or data plate on any prefab unit. Serial numbers map to spec history.
- Note the existing roof material and pitch. Coral Gables additions almost always need a tie-in, and mismatched pitch is the most common failure we see.
The OEM-versus-aftermarket question splits here too. For fixtures, Kholer, Moen, or Delta cartridges in a new bath need to match the valve rough-in, not the trim brand. For structure, there’s no aftermarket. Either the part meets Florida Building Code or the inspector won’t pass it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Home Additions & ADU Is Failing
These are the five failure modes we find most often on Coral Gables additions, and what’s causing each:
- The addition leaks at the tie-in. The new roof plane meets the old one with an underbuilt flashing detail, and south Florida rain finds it on the first storm. This is a construction defect, not a Delta part.
- The ADU has no recorded permit. It was built or converted without closing out, and the county has no record. This kills appraisal and financing until it’s brought into compliance.
- Hairline cracks along the wall-ceiling seam. The footing or slab didn’t account for Coral Gables’ seasonal high water table. It’s a structural issue, not a finish issue, and patching won’t hold.
- The window or door frames don’t align square. Framing was rushed and the rough opening is out of tolerance. Impact-rated units can’t seal to a racked frame.
- The HVAC can’t keep the new space cool. The addition was built without a load calculation (Manual J) for the added square footage. The existing unit is doing more than it was sized for.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are installed ranges for Coral Gables, not “call for a quote” numbers. Every figure below is part of a written, line-item price you receive before work begins, and none of them move at the door.
| Project | Installed Range |
|---|---|
| Home addition (typical) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the range: square footage, whether the foundation is slab-on-grade or pier, roof material and tie-in complexity, impact-rated openings required under Florida code, and permit and inspection scope. What’s included: permits pulled and inspections passed, named-brand materials, a clean site at close, and the 365-Day Done Right Promise. If the work fails within a full year of completion, we return and correct it at no charge.
DIY or Call Us?
There is no safe DIY path on a structural addition or an ADU in Coral Gables. Load-bearing framing, footing design, wind-load connections, and electrical and plumbing rough-in are governed by Florida Building Code, and getting any of them wrong can fail inspection, void insurance, or put the structure at risk.
What you can safely do: pull the permit history, photograph the data plate, measure interior clear dimensions, and document any leaks or cracks with dates. That paperwork speeds up an accurate estimate.
When you call, our technicians have up to 22 years of experience. Calls are answered by a live person, 24/7, and every crew that arrives is background-checked and uniformed. Call (833) 510-5367 to schedule your free estimate.
FAQs

A properly built addition should last decades; a poorly detailed one can start leaking or cracking within two to five years. In Coral Gables, the stress points are the roof tie-in and the footing, both under constant pressure from heavy rain and a high water table. Lifespan is set by build quality, not by any part. Call (833) 510-5367 for an exact quote; estimates are free.
Sometimes. Flashing failures and window misalignment are often fixable; an underbuilt footing or an unpermitted conversion usually means reconstruction or legalization, not a patch. We won’t sell a repair that won’t hold. Call (833) 510-5367 and we’ll tell you honestly which side you’re on. Estimates are free.
A garage conversion runs weeks; a full addition or new ADU runs months, because permits and inspections drive the schedule. We give you the timeline in writing before work starts, along with the price. Call (833) 510-5367 to schedule your free estimate.
We work from a documented roster of name-brand, manufacturer-warranted products: Delta and Kohler and Moen fixtures, KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, GAF and James Hardie roofing and cladding, and Therma-Tru doors. Every specification is traceable, and the manufacturer warranty backs our own 365-Day Done Right Promise. Call (833) 510-5367 for a written quote.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.
Ready to square it away? Call (833) 510-5367 for your free estimate. You’ll get a written price before any work starts, a full-year guarantee when it’s done, and a site left clean.












