







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Windows & Doors: The Coral Gables Owner’s Guide
Moen door hardware and window fittings in Coral Gables are installed by our crews as part of window replacement ($4,500 – $15,000) and impact window installation ($8,000 – $25,000), with hardware and locking-system swaps usually folded into the job rather than billed separately. We’re an independent service provider, not affiliated with Moen, and every job is quoted in writing before a tool comes out. Owners usually call us after a deadbolt starts grinding, a handle set works loose from the door slab, or a multi-point lock on a patio door stops catching the keeper. In Coral Gables, salt air off the bay and the afternoon humidity do most of the damage: finishes pit, internal lock mechanisms corrode, and screws backed into wood or fiber-cement door slabs loosen after a few wet seasons.
Which Moen Models This Applies To
Moen door hardware covers entry handle sets, deadbolts, and multi-point locking systems for exterior and patio doors, sold in finish families rather than tidy numbered series like their faucets. The model number is usually stamped on the interior rosette or on a sticker inside the deadbolt housing; pull the thumb-turn and look at the plate behind it. Measure your door’s backset (the distance from the door edge to the center of the bore hole) and the cross-bore diameter before ordering anything. Most residential doors are a 2-3/8-inch or 2-3/4-inch backset, and a lock built for one won’t fit the other without re-boring the slab, which is a door-shop job, not a kitchen-table job. On fiber-cement and impact-rated doors common in Coral Gables, the internal reinforcement matters as much as the lock. OEM Moen parts match the original finish and fit exactly; a quality aftermarket equivalent can save money on a builder-grade lock but will rarely match a specialty finish, and on impact-rated door assemblies the hardware has to keep the door’s rating intact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Windows & Doors Is Failing
Lock and hardware failures announce themselves well before the door stops closing. Here’s what we see most in Coral Gables homes:
- The deadbolt grinds or sticks. Corrosion inside the lock body or a misaligned strike plate is the usual cause. In salt-air neighborhoods, the internal springs and pins pit faster than the finish shows.
- The handle set wobbles. Backed-out screws or a stripped spindle. Left alone, the spindle shears and the handle comes off in your hand.
- The door no longer latches cleanly. The door slab has swelled or shifted with humidity, throwing the lock out of alignment with the keeper. Coral Gables’ wet season moves wood doors more than most owners expect.
- The key turns hard or won’t turn at all. A worn cylinder or debris in the pin chamber. This is a security issue, not just an annoyance, and it gets worse fast.
- The multi-point lock won’t engage all points. On patio doors, a bent tie bar or a dropped door sash means only one of three locking points catches. That door is not secure, even if it looks shut.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Hardware and lock replacement in Coral Gables typically runs a few hundred dollars in labor plus the part, and it’s usually quoted as part of a larger door or window job. Here’s how the ranges stack up:
| Work | Installed Range |
|---|---|
| Handle set or deadbolt swap (single door) | $150 – $450 |
| Multi-point patio-door lock hardware | $350 – $900 |
| Window replacement (hardware and fittings included) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: the finish and grade of the hardware, whether the door needs re-boring, and whether the slab itself has to be adjusted so the new lock lines up. Every price is written before work starts. All completed work carries the 365-Day Done Right Promise: if the install fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: tighten visible screws on the handle set, test whether the deadbolt extends fully into the strike, and look for corrosion or pitting on the finish and inside the lock housing with a flashlight. What goes wrong on a DIY swap is the door slab itself. Re-boring a hole in the wrong spot weakens the door, and on impact-rated door assemblies, drilling or altering the hardware can void the rating that protects your home in a storm. A door that no longer closes square needs the slab adjusted, not a bigger lock. If the lock won’t turn, the multi-point system won’t catch, or the door has shifted, that’s when to call. Call (833) 510-5367 and a live person answers, day or night, to schedule your free estimate.
FAQs

How long does Moen door hardware last in Coral Gables? Most entry hardware lasts 8 to 12 years inland, but in salt-air neighborhoods near the water, expect corrosion to cut that to 5 to 8 years. The finish is often the first thing to go, and the internal lock mechanism follows.
Can my Moen lock be repaired instead of replaced? Sometimes. A worn cylinder or a misaligned strike plate can often be corrected without a new lock. If the lock body is corroded or the spindle is stripped, replacement is the honest answer. Call (833) 510-5367 for an exact quote, and estimates are free.
How long does the swap take? A handle set or single deadbolt swap is typically an hour or two. A multi-point patio-door system or a job that requires adjusting the door slab takes longer, usually half a day.
How do you source the part? We work from a documented roster of name-brand materials and match the part to your door’s backset, bore size, and finish before ordering. Nothing is guessed. We also install KraftMaid, Cambria, and Silestone on other parts of the home.
If your Moen door hardware in Coral Gables has stopped doing its job, call (833) 510-5367 for a free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians, and a signed guarantee when we’re done. That’s The Garrison Standard, and it’s why homeowners call Bradford Remodeling Co Coral Gables.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












