







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Coral Gables Owner’s Guide
A Kohler-finished home addition in Coral Gables typically runs $45,000 – $130,000 installed, and a standalone ADU runs $90,000 – $220,000, depending on footprint, impact glazing, and how much of the existing structure you’re tying into. Kohler doesn’t make structural components: it makes the fixtures that finish the space, and that’s where owners usually run into trouble first. The most common discovery is a fixture that was roughed in for the wrong drain spacing or rough-in dimension and now sits proud of the finish line, or a shower valve and trim kit from two different Kohler series that won’t fit together. We install Kohler-matched plumbing and fixture packages inside additions and ADUs and write the scope before we start.
Which Kohler Models This Applies To

Kohler’s residential line splits into two practical groups for a Coral Gables addition or ADU: the series-driven bath and shower line (Memoirs, Archer, Devonshire, Kathryn, Verticyl and Purist among them) and the kitchen and utility line (Iron/Tones and Whitehaven sinks, Bellera and Simplice faucetry). Each Kohler series has a fixed rough-in spec and a matched trim and valve assembly, and that’s the detail that breaks additions. A Memoirs shower base and an Archer valve trim won’t mate even though both are Kohler.
The reliable way to identify what you have is the product label inside the bowl or on the underside of the fixture, plus the model number stamped into the trim plate. If a label is gone, measure the rough-in dimension from the finished wall to the drain center; Kohler’s standard residential toilets are 12-inch rough, with 10-inch and 14-inch variants available. Write those numbers down before you order anything.
The OEM-versus-aftermarket call is where Kohler differs from commodity brands. Kohler-specific trim and valve cartridges sell as genuine replacement parts and the fit is guaranteed to the series. Generic aftermarket cartridges will often physically thread in but change the temperature-limit behavior of the valve. For a fixture going into a fixed, permitted addition, we source genuine Kohler trim and cartridges; the cost difference is small against the remodel. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Kohler.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
Fixture and rough-in failures in a Coral Gables addition tend to show up in predictable order, and most of them trace back to what happened during construction rather than to Kohler’s manufacturing.
- Water pooling around the shower base instead of draining. Usually a rough-in that was set slightly off level during the pour or a mud bed mixed too dry, so the slope under the tile never reaches the drain. Kohler bases are flat on the underside by design; the slope has to come from the setting bed.
- Valve trim sitting crooked or standing off the wall. The plaster guard was removed before finish and the valve body got nudged, or the finished wall thickness came out heavier than the tile spec called for. Kohler valve bodies have a defined installation depth range and outside it the trim will not seat.
- A toilet that rocks or leaks at the base after a year. A 12-inch rough set on a 12-inch tile assembly gets the flange recessed too deep, and the wax ring compresses unevenly. This is common in older Coral Gables homes where the subfloor and finish thickness shift from the original plumbing layout.
- Cartridge drips at the shower valve handle. Hard water plus the mineral content in Coral Gables’ municipal supply wears cartridge seats faster than a northern install. Trim kits using a genuine Kohler cartridge hold up better because the seat is machined to the same tolerance as the body.
- Sink or faucet finish pitting on the Florida room side of the addition. Salt air from Biscayne Bay reaches right through screened openings and attacks chrome and polished nickel. Kohler’s Vibrant finish holds better than most, but only if the sink drain assembly was installed with the correct gasket and not a generic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fixture and rough-in corrections inside a Coral Gables addition don’t run the full remodel number. What you pay depends on whether walls come open. These are written ranges, not estimates that move at the door:
| Work Item | Installed Range |
|---|---|
| Home Addition (full scope, Kohler-finished) | $45,000 – $130,000 |
| ADU Construction (full scope, Kohler-finished) | $90,000 – $220,000 |
| Garage Conversion (Kohler bath and kitchenette) | $30,000 – $80,000 |
| Bathroom Remodel (Kohler fixtures and trim) | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What moves the range: whether tile comes off, whether the valve body needs re-setting behind the wall, and how much impact-rated glazing the addition requires under Florida Building Code. The price we write covers parts, labor, permits, and inspection. Every completed project carries our 365-Day Done Right Promise: if the work fails within that full year, we come back and fix it at no charge.
DIY or Call Us?
You can safely do three things before anyone opens a wall. Read the model label inside the fixture. Measure the rough-in from the finished wall to the drain center. Photograph the trim plate and the valve stem with the handle off. That’s it. Reset a valve body behind a finished tile wall or re-level a shower base and you’re pulling set tile and disturbing the waterproofing layer, which is the one thing in a bathroom that a homeowner cannot verify visually.
Anything past surface trim and this becomes a permit-and-tile job, and a bad re-set leaks slowly behind the wall for months before you see it. We write the price before work starts, and we keep it. Call (833) 510-5367 for a free estimate, and a live person answers around the clock.
FAQs

Genuine Kohler vitreous china and cast iron fixtures commonly run 20 to 30 years, but the trim, cartridges, and drain assemblies around them often fail in 8 to 12. In Coral Gables the salt air and harder municipal water shorten that trim life noticeably, so plan on cartridges and finish parts before you plan on the fixture itself. Call (833) 510-5367 for an exact scope – the estimate is free.
Yes in most cases. A dripping Kohler shower cartridge or a rocking toilet is a repair, not a replacement, and it usually costs far less than swapping the whole fixture. The exception is a shower base that was set out of level or a valve body secured at the wrong depth behind the tile; those need the wall opened to correct. We’ll tell you which one you have before quoting anything.
A cartridge, trim kit, or toilet re-set is a few hours of work, and a shower base or valve replacement inside a Coral Gables addition typically takes one to three days once the tile is off, plus tile cure time. A full fixture package in a new ADU runs inside the construction schedule, not on top of it. We give the duration in writing with the price.
We source genuine Kohler replacement parts matched to your model number, not a generic cartridge that happens to fit the thread. Kohler’s series compatibility is specific enough that the model and series both have to match, and we confirm that from the label inside the fixture before ordering. Our technicians have up to 22 years of experience, and we also install KraftMaid, Cambria and Silestone alongside Kohler in the same additions. Call (833) 510-5367 for a free written estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












