







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Roofing: The Coral Gables Owner’s Guide
Kohler doesn’t manufacture roofing. Kohler makes plumbing fixtures, cabinetry, generators and tile, and the “Kohler roofing” searches we get in Coral Gables almost always trace back to one of two things: a Kohler skylight or roof window unit that’s leaking, or a Kohler-branded tile or metal panel specification on a roof that’s now failing at the fasteners and flashing. A full roof replacement in Coral Gables runs $8,000 – $20,000; a targeted repair around a Kohler unit or panel section runs $400 – $1,800.
Owners usually find out the hard way. A ceiling stain shows up in the hallway after a summer squall, or the skylight frame starts weeping onto the tile below it. Sometimes it’s the panel system itself: popped fasteners, lifted seams, granules in the gutter. Either way, the part has failed and the ceiling is telling you before the roof does.
Which Kohler Models This Applies To

Kohler’s skylight and roof window lines appear on Coral Gables homes most often as fixed and venting units, typically in nominal sizes from about 22 by 28 inches up to 30 by 54 inches, with model identification on a data plate inside the frame or stamped on the glass spacer. After the 2010s, Kohler’s tile and surface business (now part of a separate entity) also shows up as specified wall and roof tile, and that’s a different beast entirely: check the carton label or tile back stamp before you order anything. Kohler-branded metal roofing panels carry a profile stamp and gauge on the panel underside, usually 24 or 26 gauge.
OEM versus aftermarket is a real decision here. For the skylight gasket, hinge hardware and vent operator, we source the OEM Kohler part or its current production replacement: the tolerances are tight and aftermarket glass seals leak within two Miami-Dade summers. For the roofing membrane, underlayment and flashing around the unit, quality aftermarket and name-brand materials outperform what came originally, and we spec GAF and CertainTeed products with manufacturer warranties that back our own guarantee. Match the part number first, then decide where to save.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Roofing Is Failing
- Water staining or rust trails at the frame. The seal or flashing around a Kohler skylight unit has broken down, letting wind-driven rain past the curb. Coral Gables’ afternoon thunderstorms push water sideways, so even a small gap shows up fast.
- Condensation and fog between the panes. The insulated glass seal has failed. The window is no longer doing its job and the unit needs replacement, not a caulk job.
- Lifted seams or popped fasteners on panels. Heat cycling and wind uplift work fasteners loose. In Coral Gables, a lifted seam is a hurricane-strap problem waiting to be found by an inspector.
- Visible cracked or missing tile. A broken field tile under a Kohler-spec roof lets water into the underlayment. The tile is the shield; the underlayment is the waterproofing, and once water is past the tile, the underlayment is what’s failing.
- Granules in the gutter and grit on the driveway. On an asphalt shingle section, granule loss means the shingle is past its service life. Florida sun degrades shingles faster than the manufacturer’s mainland rating suggests.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Every price is written down before a tool comes off the truck, and it doesn’t move at the door. Coral Gables roof work, priced:
| Scope | Installed range |
|---|---|
| Roof repair (flashing, seal, small section) | $400 – $1,800 |
| Tile roof repair around a Kohler unit or field | $600 – $2,500 |
| Full roof replacement (shingle or tile) | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: roof size and pitch, access (a Coral Gables home under a live oak with a steep second story costs more to work safely), whether the underlying deck needs repair, and whether the code-required permit and inspection are included. They are, always. Parts and labor appear as separate lines on the quote. And every completed job carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. That guarantee is signed and in your hand before we leave.
DIY or Call Us?
A few things are safe to check from the ground: missing or cracked tile, granules in the gutter, staining on a ceiling, condensation inside a skylight pane. That tells you something is wrong. What you should not do is get up on the roof to diagnose or repair a leak around a Kohler unit or a failing panel system. Roof work means height, and in Coral Gables it also means a permit and an inspection that a DIY repair won’t pass. A leaking skylight or seam isn’t a homeowner fix; it’s a two-person, ladder-and-harness job. We send background-checked, uniformed technicians, so you know who’s on your lawn. Call (833) 510-5367 to schedule a free estimate.
FAQs

Expect roughly 15 to 20 years for a Kohler glass skylight unit, and the seal usually fails first. Florida’s UV and heat cycles age the gasket and glazing faster than the unit’s rating assumes. Call (833) 510-5367 and we’ll date yours and quote a replacement.
Sometimes. Flashing and seal repairs around a Kohler unit are common and inexpensive, starting at $400. If the glass unit has lost its seal or the panel system is lifted over a large area, repair won’t hold and replacement is the honest answer. Call (833) 510-5367 for a free estimate and a straight assessment.
A flashing or seal repair takes an afternoon; a full skylight or panel section replacement typically runs one to two days depending on access and deck condition. Coral Gables permits add a few days to the schedule. We give you the timeline in writing with the price. Call (833) 510-5367 to get it started.
We match the model or part number off the data plate first, then order the OEM part or its current production replacement through documented suppliers. We also work a documented roster of name-brand materials, including GAF, CertainTeed, James Hardie, KraftMaid, Cambria and Silestone, so every specification is traceable. Call (833) 510-5367 and we’ll sort out the exact part with you.
Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Kohler.
When you’re ready, call (833) 510-5367 for a free estimate. A live person answers, any hour, and you get a written price before any work starts.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












