







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Bathroom Remodeling: The Coral Gables Owner’s Guide
Kohler-compatible bathroom remodeling in Coral Gables runs $9,000 – $28,000 installed, with fixture, valve, and trim work priced inside that range based on what your bathroom actually needs. Most owners reach this page after a slow drip from a Kohler faucet, a leaking toilet fill valve, or a shower valve that runs warm no matter how far the handle turns. We install and service Kohler fixtures and the parts that keep them working, and we quote every job in writing before work starts.
Bradford Remodeling Co Coral Gables is an independent service provider. We’re not affiliated with Kohler; we work with Kohler fixtures and parts the same way we work with KraftMaid, Cambria, and Silestone: to manufacturer spec, with the documentation to back it.
Which Kohler Models This Applies To

Kohler parts don’t interchange across lines. A Fill Valve for a Memoirs one-piece toilet will not fit a Wellworth, and a cartridge for a Purist widespread faucet is not the same part as one for a Fairfax centerset. The model number lives in one of two places: stamped inside the tank lid on toilets, or on the escutcheon plate under the handle on faucets. If the label is gone, we measure the rough-in (the distance from the wall to the toilet drain center, usually 12 inches in Coral Gables homes) and match the trim shape to Kohler’s catalog.
On the OEM-versus-aftermarket call: for Kohler fill valves and flush valves, genuine parts are worth the $10 – $25 premium because aftermarket rubber seats wear faster in our humidity and chlorine-heavy municipal water. For cosmetic trim, a quality aftermarket equivalent is fine. We document which parts went in so the 365-Day Done Right Promise has something concrete to cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Bathroom Remodeling Is Failing
- Toilet runs for 10 – 20 seconds after every flush. The flapper seal is warped or mineral-crusted. Coral Gables water runs hard, and a flapper that lasted five years up north often fails in three here.
- Faucet drips from the spout with the handle off. The ceramic cartridge has scored, usually on the hot side first. A drip at that rate can waste 2 – 3 gallons a day.
- Shower handle is stiff or squeaks. The pressure-balancing valve cartridge is binding. On Kohler thermostatic valves this often shows up as scalding spikes when a nearby toilet flushes.
- Water seeps from under the faucet base. The O-ring and seat have failed, and water is tracking into the deck. Caught late, this rots the substrate under a stone countertop.
- Fill valve won’t shut off and you hear a constant hiss. The float or diaphragm has failed. This is the most common Kohler part we replace, and it’s usually the cheapest fix on this list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Coral Gables homeowners actually pay, installed, with the part, labor, and disposal in the price:
- Toilet fill valve or flush valve replacement: $180 – $340
- Faucet cartridge replacement: $150 – $300
- Faucet replacement (Kohler, mid-line): $350 – $750
- Shower valve cartridge replacement: $275 – $550
- Full bathroom remodel (Kohler fixtures throughout): $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
What moves the number: whether the rough-in needs adjusting, whether the deck has to be cut for a new faucet spread, and whether you’re matching existing Kohler trim or replacing a full set. Every price is written before work starts. No numbers that move at the door. The work carries the 365-Day Done Right Promise: if a part we installed fails inside a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things yourself: lift the toilet tank lid and look at the flapper and fill valve, feel for water at the faucet base, and write down the model number. That’s it. Cartridge swaps inside a Kohler pressure-balancing valve are tricky without the right puller, and a wrong move on the valve body means water behind the tile. Shower valve work means shutting off the main and opening a wall. It’s not a job that rewards guesswork.
Technicians we work with have up to 22 years of experience on Kohler fixtures, and every job gets a background-checked, uniformed technician. Call (833) 510-5367 for a free estimate. A live person answers, day or night.
FAQs

Expect 3 – 7 years on a fill valve and 7 – 12 years on a faucet cartridge here. Hard water and high chlorine shorten both, which is why we see failures earlier in Coral Gables than the manufacturer’s stated lifespan. Call (833) 510-5367 for a quote on replacing yours.
Sometimes. A cartridge with a worn O-ring can often be cleaned and reseated. A cracked ceramic disc cannot. We look at the part before quoting a replacement, and we’ll tell you if a $12 seat kit solves it. Call (833) 510-5367 and we’ll take a look.
Most single parts, like a fill valve or a cartridge, take 30 – 90 minutes. A shower valve swap that opens a wall runs 2 – 4 hours. Full bathroom remodels run 2 – 4 weeks. Call (833) 510-5367 for a timeline specific to your bathroom.
We match the model number to Kohler’s catalog, confirm the rough-in and trim spec, and order the exact part. We don’t carry parts on a truck; we source to your fixture. That means a day or two of lead time on some parts, but you get the right one. Call (833) 510-5367 to get started.
Every project from Bradford Remodeling Co Coral Gables gets a written price before work starts, a clean site at close, and a signed guarantee in your hand. That’s The Garrison Standard at work, and it’s one reason homeowners call us instead of the guy who never showed. Call (833) 510-5367 for a free estimate on your Coral Gables bathroom.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












