







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Coral Gables Owner’s Guide
Home additions and ADUs in Coral Gables typically run $45,000 – $130,000 for a framed addition and $90,000 – $220,000 for a full accessory dwelling unit. We build with Cambria quartz specified into kitchens, bath vanities and wet bars inside those new spaces, and we don’t promise same-day construction – a real Coral Gables addition is permitted, inspected and sequenced over months, not hours.
Owners usually call us for a different reason than they expected. They had Cambria surfaces set into a new addition or garage conversion a few years back, and now they’re staring at a chip at the sink edge, a hairline crack near a seam, or a stain that won’t lift. That’s the moment this guide is built for. Bradford Remodeling Co Coral Gables is an independent remodeling contractor, not affiliated with Cambria, and we’re candid about what can be repaired, what needs replacing, and how it fits into a larger addition or ADU project.
Key Takeaways
- A Coral Gables home addition lands at $45,000 – $130,000; an ADU at $90,000 – $220,000. Cambria surfaces are one line item inside that.
- Cambria is engineered quartz – non-porous, so unlike natural stone it doesn’t need sealing, but it also can’t be refinished the way marble can.
- Chips and edge failures are the most common call; a qualified fabricator can often repair them in place rather than replacing a whole slab.
- South Florida humidity and sun exposure punish cabinetry, framing and finishes far more than the quartz itself. That’s where additions here fail first.
- Every Bradford project gets a written price before work starts and the 365-Day Done Right Promise – if the work fails inside that year, we return and correct it at no charge.
Which Cambria Models This Applies To

Cambria doesn’t publish “part numbers” for its surfaces the way an appliance maker does, and that trips up homeowners who come looking for a model-specific replacement. Cambria is a brand of engineered quartz sold as slabs and fabricated per project. What matters for matching a replacement isn’t a serial number – it’s the design name and the slab dimensions.
Turn the edge of the old surface over, or check the original contract and shop drawings from the addition. You’re looking for a Cambria design name (the collections include lines like Britannica, Ella, Torquay and Annaleigh, among many others), the slab thickness – typically 2 cm or 3 cm – and the edge profile if you’re matching a run that’s still in service. The gotcha: Cambria retires and renames designs over time, and dye lots shift subtly between production runs. If you’re trying to match a 2 cm slab against a discontinued design in a Coral Gables kitchen, the honest answer may be to replace the whole run or introduce a deliberate contrasting surface rather than chase an exact match.
OEM versus aftermarket matters differently here. There’s no meaningful “aftermarket Cambria” – the slab is the slab. The real variable is the fabricator: template accuracy, seam placement, edge finishing and waterproofing at the cutouts. A well-fabricated install with a documented brand (we also work with Silestone and Caesarstone, and KraftMaid cabinetry if the surrounding room is being rebuilt) is what carries the warranty. We work from a documented roster of name-brand materials so specifications stay traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
Quartz itself is durable, but the assembly around it – seams, edges, substrate, and the room it sits in – is where problems surface first in Coral Gables homes. Here’s what to watch for and why each happens.
- A chip at the edge or sink cutout. Impact from a dropped pan or a poorly supported overhang concentrates stress at the thinnest point. Cambria can chip like any quartz; the fix is usually a color-matched epoxy repair done by a fabricator, not a full slab swap.
- A hairline crack running from a cutout or seam. This usually means the substrate beneath the slab flexed, or the seam wasn’t bonded correctly during the original install. It’s often a fabrication or support issue, not a defect in the quartz.
- A ring or stain that won’t lift. Unlike marble, engineered quartz isn’t porous, so a stain that persists usually points to surface damage or a resin issue rather than absorption – worth having inspected rather than scrubbed harder.
- Visible seam discoloration or lifting. Adhesive breaks down over time, especially in spaces where humidity swings. In a Coral Gables addition with a wet bar or bath, this is common and re-seamable.
- Cabinet or framing movement beneath the surface. In older additions, humidity and settling warp the substrate, and the quartz telegraphs that movement. This is the one symptom that points to a structural or moisture problem, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest split for a Coral Gables addition or ADU project, with the Cambria surface work broken out. Pricing assumes documented, written scope – no numbers that move at the door.
- Home Addition (framed, permitted): $45,000 – $130,000
- ADU Construction (full unit): $90,000 – $220,000
- Garage Conversion (into living space): $30,000 – $80,000
- Countertop Installation (Cambria or comparable quartz): $2,000 – $6,500
- Kitchen Island Installation: $3,000 – $10,000
- Bathroom Vanity Installation: $800 – $3,000
What drives the range: slab count, edge profile complexity, cutout count (sink, cooktop, outlets), seam layout and site access. A single chip repair is a small line item; a full surface replacement in a new ADU kitchen is a mid-range one. Every Bradford estimate is a written price before work starts, itemized so you see parts and labor separately. All completed work carries the 365-Day Done Right Promise – a written guarantee, and if the work fails within that year, we return and correct it at no charge.
DIY or Call Us?
Some things you can check yourself. Some you should not touch. A quick visual inspection is safe: look for chips, run a fingernail gently along seams, check whether the surface rocks or flexes when you press near a cutout, and photograph anything suspicious with a scale reference. That’s diagnostic, and it’s useful.
The line to hold: don’t attempt to remove, cut, glue, or re-support a quartz slab yourself. A 3 cm Cambria slab is heavy and unwieldy, and an unsupported overhang or a botched adhesive repair can crack the whole piece or cause injury. There’s no safe “how to fix it” short-cut here – a fabricator with the right tools and color-matched epoxy handles chips and seams correctly. We’re booked with a live person answering the phone, and we’ll tell you straight whether you’re looking at a repair or a replacement before you spend a dollar. Call (833) 510-5367 to schedule a free estimate.
FAQs

Cambria quartz typically holds up for 15 – 25 years or more in a properly supported installation, and because it’s non-porous it never needs sealing the way natural stone does. What shortens that lifespan in South Florida isn’t the quartz itself – it’s moisture and settling in the substrate and cabinets beneath it, which is why the framing and ventilation of the addition matter as much as the slab. If you’re planning new space or replacing failing surfaces, call (833) 510-5367 for a free estimate.
Often yes – chips and edge damage are frequently repairable in place with color-matched epoxy by a qualified fabricator, and cracked seams can be re-bonded. A crack that runs through a cutout or points to a failing substrate usually calls for replacement or added support. A site visit tells you which one you’re facing, and estimates are free at (833) 510-5367.
A straightforward countertop or vanity replacement is typically a one-to-two-day job once the slab is fabricated, though template, production and scheduling add lead time ahead of install day. When it’s paired with a larger Coral Gables addition or ADU, the surface work is sequenced into the overall build. Call (833) 510-5367 for a free estimate and a written timeline.
We work from a documented roster of name-brand materials – Cambria, Silestone, Caesarstone, KraftMaid, Kohler and Moen among them – so specifications are traceable to the manufacturer. That means matching your design name, slab thickness and edge profile against current availability rather than guessing, and pulling permits where required. Call (833) 510-5367 to schedule your free estimate and get a written price before any work begins.
Call Bradford Remodeling Co Coral Gables at (833) 510-5367 to schedule your free estimate. We answer with a live person, 24 hours a day, seven days a week – no voicemail, no callback queue. You’ll get a written, itemized price before a single tool comes out, background-checked, uniformed technicians on the job, and the 365-Day Done Right Promise standing behind the work for a full year. Our technicians have up to 22 years of experience, and every Coral Gables project closes squared away: clean site, documented scope, and a signed written guarantee in your hand.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












