







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Coral Gables Owner’s Guide
Fence installation in Coral Gables runs $3,500 – $9,000 for a typical residential job, and that range holds whether we’re setting new posts or replacing a failed section around maturing landscaping. We install fencing built to the same dimensional standards Wellborn specifiers work with, and we’ll match your existing fence line rather than sell you a whole new run. Most Coral Gables owners discover a problem the same way: a gate that drags on its hinge, a post that moves when they lean on it, or a fence run that leans a few degrees after a wet season. It rarely fails all at once. It usually shows you a small symptom a year before the big one.
A quick note on how we work: Bradford Remodeling is a remodeling and general contracting company, and we’re independent. We aren’t affiliated with Wellborn. We install fencing and exterior work alongside our kitchen and whole-home projects, using a documented roster of premium brands that also includes KraftMaid, Cambria, and Silestone.
Key Takeaways
- Installed fence pricing in Coral Gables lands in the $3,500 – $9,000 range for most homes.
- Wellborn-familiar specs matter most at the post, rail, and gate hinge; that’s where failures start.
- Salt air and seasonal downpours shift wood and loosen footings faster here than inland Florida.
- You get a written price before work starts, and the finished job carries the 365-Day Done Right Promise.
Which Wellborn Models This Applies To

Wellborn builds cabinetry, so you may wonder why a fence guide carries the name. It applies because Wellborn’s published dimensional standards are what many Coral Gables property managers reference when they spec matching exterior millwork, gates, and fence panels. If you have a Wellborn spec sheet or a homeowner association packet built around it, that sheet lists nominal dimensions and the tolerance the finished piece needs to meet. That’s what we install to.
Identify the right fit by measuring, not by guessing. Check three things: the actual post spacing center to center, the rail thickness on your existing run, and the gate opening width at the hinge side. Wellborn dimensional drawings will name these as nominal sizes with a tolerance band, often a small fraction of an inch. Your tape measure tells you the truth; the label on the panel tells you what it was supposed to be. If those two don’t match, something has shifted, and that’s the first thing we check.
On the OEM-versus-aftermarket question: for fencing, a quality aftermarket post or rail that matches the dimensional spec is fine, and often the sensible choice. The piece that matters is the connection. A gate hinge rated for a lighter load will fail on a Coral Gables gate that takes afternoon wind and daily use. We specify hardware by load, not by catalog page number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Fence Installation Is Failing
Here’s what failure actually looks like on a Coral Gables fence line. Each symptom points to a specific cause underneath it.
- Gate drags on its latch or hinge. The hinge has worn or the post has settled, and the gate is carrying its weight at an angle it wasn’t built for. Left alone, the hinge will wallow out the post grain and the fix gets bigger.
- Posts move when you push on them. Footings are the culprit. Coral Gables sits on ground that holds water after heavy rain, and a shallow or undersized footing lets the post work loose over a couple of wet seasons.
- Fence run leans in a consistent direction. That’s a footing or soil issue, not a panel issue. It usually shows up first on the run that catches the most sun on one side, because the wood dries and shrinks unevenly against the post.
- Rails pull away from posts at the fasteners. Either the fastener backed out or the wood has shrunk around it. In our humidity, painted wood fence can shrink and swell enough to loosen a fastener that was tight at install.
- Visible rot at the base of a post, or paint bubbling near the ground line. This is the one to catch early. Rot at the base travels up inside the post before you see it on the surface, and a post that’s rotting at the base can’t be saved with paint or a trim board.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Coral Gables falls in the $3,500 – $9,000 range for most residential jobs. Here’s what drives the number up or down:
- Linear footage and post count. Every post is a footing, and footings are where the labor lives.
- Gate count and hardware grade. A single gate with heavy-duty hardware costs more than the panels around it.
- Site access. A tight side yard or a run behind mature landscaping takes longer to work than an open back lot.
- Material choice and finish. Painted or stained finishes and premium rail profiles move you toward the upper end.
Everything comes as a written line-item price before work starts, and that number doesn’t move at the door. Labor, hardware, and cleanup are spelled out. When we finish, you have a written guarantee in hand: the 365-Day Done Right Promise covers the work for a full year, and if anything on our install fails inside that window, we come back and correct it at no charge. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed before they set foot on your property.
DIY or Call Us?
Some of this you can safely check yourself, and some of it you shouldn’t touch.
What’s safe to check: walk the fence line and push on each post at shoulder height. If a post has any give, note it. Look at the base of each post for soft wood, bubbling paint, or a gap where soil has washed away. Open and close each gate and note where it drags or catches. All of that helps us build an accurate quote, and none of it involves digging or lifting.
Where DIY goes wrong is below grade and at the hinge. Digging up and resetting a footing is heavy work, and it’s work that fails again fast if the new footing isn’t sized for our soil and water table. Getting it wrong can also damage a mature root system or a buried irrigation line. If a gate hinge is failing, the wrong replacement hardware can pull out of the post and drop the gate on someone. Fence hardware under load is not a light repair.
Here’s the split, cleanly: for fence and any part of the panel structure that shifts or fails, call us. Our crews confirm what’s actually failing before any work is quoted, and we’ll tell you plainly if a repair makes more sense than a replacement. Call (833) 510-5367 to schedule your free estimate. A live person answers, 24 hours a day.
FAQs

A properly set fence in Coral Gables should hold its structure for 10 to 15 years before the footings or hardware need real attention. The salt air and seasonal downpours that come with the coastal climate here shorten the life of painted wood and accelerate corrosion on bare-metal hardware, so how the posts are footed and how the hardware is protected matter more than the panel material itself. Call (833) 510-5367 for an exact quote; estimates are free.
Often, yes. A failing gate hinge, a single leaning post, or a run of pulled rails can frequently be corrected without replacing the whole fence line. The deciding factor is the post base: if the wood at the base of the post is sound, a repair usually holds; if it’s rotting upward from the ground, a patch won’t last. We check that before quoting, and we’ll tell you which it is. Call (833) 510-5367 for a free estimate.
Most residential fence installations in Coral Gables take one to three days of on-site work, with footing cure time factored in. A single-post repair or a gate hardware swap can be a half-day. What stretches the schedule is site access behind landscaping or a run that needs old footings cut out and replaced. You’ll get a realistic timeline in writing with your estimate. Call (833) 510-5367 to schedule yours.
We source to the spec your fence was built to, which means matching post and rail dimensions and specifying hardware by load rather than by brand loyalty. We don’t stock parts or carry them on a truck, so we order each job’s materials to the measurements we take on site. That’s how we avoid the classic mismatch where a replacement piece sits a fraction of an inch off and the whole run wobbles. Call (833) 510-5367 to schedule your free estimate.
When you’re ready to get this squared away: Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. We’ll walk the fence line, tell you exactly what’s failing, and give you a written price before any work starts. Our technicians are background-checked and uniformed, a live person answers the phone around the clock, and every completed project carries the 365-Day Done Right Promise, in writing.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












