







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Coral Gables Owner’s Guide
Fence installation tied to a KraftMaid exterior specification in Coral Gables typically runs $3,500 – $9,000 installed, and the work is scheduled, not same-day – this is planned construction, and we quote it in writing before anything starts. Homeowners usually find the problem the same way: a gate that stops latching square, posts that have racked out of plumb after a wet season, or a run that leans after a storm. You notice it on a Saturday, you push on a post, and it moves. That’s when the calls start.
Bradford Remodeling Co Coral Gables is an independent service provider. We’re not affiliated with KraftMaid, and we don’t claim to be. What we do is install and correct fence assemblies that meet the specification a KraftMaid exterior plan calls for, and we put the price and the guarantee in writing first.
Key Takeaways
- Installed range for this work in Coral Gables: $3,500 – $9,000, quoted in writing before work begins.
- Most failures here are footing and fastener failures, not material failures – Coral Gables soil and summer rain load punish shortcuts.
- Every completed job carries the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge.
- A live person answers the phone, day or night. No voicemail queue.
Which KraftMaid Models This Applies To

KraftMaid builds cabinetry, and their exterior and outdoor living lines carry specification sheets for the assemblies that surround and support their installed products – which is where fence and screen-wall specs enter the picture. If your plan references a KraftMaid exterior series, the spec sheet will name the post spacing, the rail profile, and the fastener schedule. That sheet is the document that matters. Not a photo. Not a memory of what the last installer did.
To identify what you’re actually matching, look in three places: the spec sheet or plan set that came with the original project, the label or stamp on the hardware itself, and a physical measurement of post spacing and rail height. Measure center-to-center on the posts. Measure the rail from the top edge to the bottom edge. Write both numbers down. Nine out of ten order errors we see start with a measurement taken from the wrong reference point.
On OEM versus aftermarket for KraftMaid specifically: OEM hardware matches the original profile exactly and costs more. A quality aftermarket equivalent can work when the profile and gauge match, but “close enough” in gauge is where homeowners get burned – a rail that’s two gauge sizes lighter will sag within two summers in South Florida humidity. We specify the match in writing so there’s no argument later.
KraftMaid isn’t our only documented line. We also work with Cambria, Silestone, and Kohler on interiors, and GAF and James Hardie on exteriors – brands with manufacturer specs and warranties that back our own guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Fence Installation Is Failing
Five symptoms, and what’s actually causing each one. In Coral Gables, the pattern is consistent enough that we can usually name the cause before we arrive.
- Posts that move when you push on them. The footing has lost its grip – either it was set too shallow or the concrete wasn’t cured properly before the first rain. Once a post rocks, the whole run is working against itself.
- Gates that drag or won’t latch. Usually a hinge-side post that’s out of plumb, not a bad hinge. Homeowners replace the hinge, the gate still drags two weeks later, because the post was always the problem.
- Sagging rails between posts. Almost always an undersized rail or a fastener that backed out. In Coral Gables, salt air and humidity accelerate fastener corrosion faster than most of the country.
- Loose or missing fasteners along a run. Wind load works fasteners loose over time. If you can wiggle a fastener by hand, the connection is already compromised.
- Racking – the run leans as a unit. The sign of a footing failure across multiple posts. This is the one that needs attention before the next named storm, not after.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Coral Gables, this work runs $3,500 – $9,000 installed. The range is driven by three things: total linear footage, the material and gauge you select, and whether footings need to be re-set or only the above-grade assembly is being corrected. A short repair on failing fasteners sits at the bottom of that band. A full re-run with new footings and a gate assembly sits at the top.
| Scope | Installed Range |
|---|---|
| Fastener and connection correction, short run | $3,500 – $4,800 |
| Section replacement with existing footings reused | $4,800 – $6,800 |
| Full run with new footings and gate assembly | $6,800 – $9,000 |
Every quote is line-itemed: parts, labor, footings, haul-away. No number moves once work starts. The 365-Day Done Right Promise covers the completed work for a full year – if a footing or a connection we installed fails inside that window, we come back and correct it at no charge. That’s in writing, signed and in your hand at close.
DIY or Call Us?
An owner can safely check a lot of this without touching a tool. Push on posts. Check that gates latch without lifting. Look for rust streaks at fasteners. Photograph the run from a few angles. All of that helps us diagnose before we arrive.
What goes wrong in DIY here is the footing. Digging and setting a post that actually holds in Coral Gables soil, with the water table and the rain we get, is a different job than it looks. We see it constantly: a homeowner sets a post, it feels solid, and it racks out after the first wet season. The second DIY failure is gauge – buying a rail that looks right and sags within two summers. There’s also a real safety concern on gate assemblies and any post carrying load: a footing that fails under load can take the whole run down, and a falling gate section is heavy enough to do real harm.
Check what you can check. Call us for the rest. Call (833) 510-5367 to schedule your free estimate.
FAQs

Properly footed and installed, expect 15 to 25 years for the assembly, with fastener service every few years in South Florida’s salt air and humidity. Lifespan drops sharply if footings were set shallow or fasteners were undersized. Call (833) 510-5367 for an exact quote – estimates are free.
Yes, often. Fastener and connection failures are frequently repairable without touching the footings, and that’s the lower end of the range at $3,500 – $4,800. Multi-post racking usually means footings, which pushes toward full replacement. Call (833) 510-5367 and we’ll tell you honestly which one you’re looking at.
A fastener and connection correction is a day. A full run with new footings and a gate assembly runs two to four days in Coral Gables, depending on footage and how many posts need to come out. The written quote names the timeframe before work begins.
We match the hardware to the specification sheet or measured profile, and we order from documented suppliers with manufacturer specs – not from a bin of lookalikes. We don’t stock parts and we don’t carry them on a truck; each order is specific to your project. Call (833) 510-5367 to start with a free estimate.
Every project starts the same way: a written price before any work starts, background-checked and uniformed technicians on the job, and a live person on the phone at (833) 510-5367 whenever you need one. When we close out a job in Coral Gables, you get a clean site, a documented scope, and a signed written guarantee in your hand. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












