A Bradford company - serving Coral Gables, FL
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Opa-locka, FL

Dvele Construction in Opa-locka, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Construction in Opa-locka, FL

We provide independent Dvele service across Opa-locka, from modular ADU set and home addition tie-ins to roof flashing and seam repair on finished modules. What sets our Dvele work apart here is the interface: a factory-square module meeting hand-patched 1926 Moorish Revival stucco, under a landmark ordinance and strict city code enforcement. That seam is where most problems start, and it’s where we spend our time. Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with or authorized by Dvele. Call (833) 510-5367 for a free estimate.

Call (833) 510-5367

Why Opa-locka Residents Choose Us for Dvele Service

A garage converted into a guest room and home office

Dvele builds modular and panelized homes, ADUs, and addition modules in a factory, then sets them on site. The factory part is precise. The site part is where Opa-locka gets complicated, and it’s the part we know. We’ve worked the seam between a level module and aged, sometimes unpermitted masonry footings enough times to read the early warning signs: a hairline at the base plate, a soft spot in the flashing, a finish line that doesn’t sit level against a curved arch.

Our technicians have up to 22 years of experience, and every job comes with a written price before work starts. No numbers that move at the door. We use OEM or documented-equivalent panels, connectors and trim on Dvele structures, and quality aftermarket hardware and waterproofing only where the spec matches. You know who’s coming before the crew arrives, because our technicians are background-checked and uniformed. And a live person answers the phone at any hour, not a voicemail.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Solve in Opa-locka

  • Module-to-foundation settling and seam separation. Opa-locka’s 1926-era footings were poured for a different kind of building, and some additions were never permitted. A Dvele module sits dead level; the footing underneath may not be. Differential movement opens the seam within a season or two, and that’s the crack you’re seeing at the base plate.
  • Moisture intrusion at roof and wall transitions. South Florida’s driving summer rain and hurricane-season wind loading find every utility penetration and roof-to-wall junction. On a Dvele module those joints are tight from the factory but exposed once set. We open, re-flash and re-seal the envelope rather than caulk over a leak that will return.
  • Exterior finish mismatches against Moorish Revival fabric. Dvele’s clean panel lines meet hand-patched plaster, arches and crenellations that no supplier stocks a part for. Matching curved ornamental stucco means hand-patching, and getting the texture and color to read as one building takes a craftsman, not a catalog.
  • Permitting friction on tie-ins to older structures. Opa-locka runs strict code enforcement on aging buildings, and a Dvele addition tying into an existing structure with unpermitted additions draws inspection attention. We coordinate permits and historic-consistency review so the module and the old building pass together.
  • Roof seam and flashing failure. Wind-driven rain at the module-to-wall junction is the single most common call we get. Left alone, a small flashing gap turns into water staining on the interior ceiling and, eventually, a compromised envelope. Early repair is the cheaper path.

Dvele Service in Opa-locka: What Local Conditions Mean for Your Equipment

Opa-locka holds the largest concentration of Moorish Revival architecture in the country, a 1920s Glenn Curtiss development of domes, minarets, horseshoe arches and crenellated facades, and the landmark ordinance protecting the downtown changes how a Dvele module gets finished. If your Dvele home, ADU or addition ties into a historic property, exterior work on that seam can trigger historic-consistency review, and the curved plaster and ornamental stucco on the 1926 fabric has to be hand-patched to match. No off-the-shelf part fits a horseshoe arch. That intersection of precision modular construction and protected whimsical masonry is a permitting and finish problem, not just a build, and it’s the reason a Dvele structure here can look factory-clean on one wall and hand-sculpted on the next. On a typical Opa-locka job, a Dvele modular ADU is set beside or attached to stucco-over-masonry, and within a season the owner notices hairline cracks at the seam, water staining at the roof-to-wall junction, or a finish that reads factory against hand-patched arches. The usual cause is differential movement between the module and an aging, occasionally unpermitted footing, plus wind-driven rain finding penetrations. A qualified local pro opens and assesses the seam, re-flashes and re-seals the envelope, checks footing and tie-in, coordinates any required permit or historic-consistency review, and hand-patches plaster and stucco so the module and the historic structure read as one building.

Dvele Models & Products We Service in Opa-locka

We work the full Dvele range that lands in Opa-locka’s 33054 and 33055 ZIP codes: the Dvele modular single-family home, Dvele accessory dwelling unit modules, Dvele prefabricated addition and expansion modules, and custom modular configurations built to an owner-specified layout. Each one carries the same site-built interface problems, and each one needs the same care at the seam.

Dvele-specific panels, connectors and proprietary trim come from the manufacturer or a documented equivalent, because a substitute part on a modular envelope is a leak waiting to happen. Commodity hardware, fasteners and waterproofing can be quality aftermarket where the spec matches. We don’t claim local stock on Dvele parts: every job is sourced to order, which is how the right part arrives instead of the closest one.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Service Pricing in Opa-locka

A project lead and homeowner reviewing plans in a room under renovation

What a Dvele job costs in Opa-locka depends on whether it’s a seam and flashing repair, a tie-in of a module to existing masonry, or a full addition or ADU. A local flashing or seam repair is small work next to a full module set. Every price below is a written, fixed range before any work starts.

Service Price range
Home Addition (Dvele module tie-in / expansion) $45,000 – $130,000
ADU Construction (Dvele modular ADU) $90,000 – $220,000
Roof Repair (module-to-wall / seam flashing) $400 – $1,800
Roof Replacement & Installation $8,000 – $20,000

A free estimate includes an on-site assessment of the seam, footing and envelope, and a written line-item price. Call (833) 510-5367 to schedule yours.

Serving Opa-locka, FL – Our Local Coverage Area

We serve Opa-locka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Dvele Construction in Opa-locka

Service Areas Near Opa-locka

We serve Dvele owners across Opa-locka and the surrounding communities, including Pinewood, Westview, Brownsville, Gladeview and Miami. If your module sits just outside the city line, we can still help. See our Opa-locka service area page for coverage details, and our Dvele service page for more on how we approach modular work.

Book Your Dvele Service in Opa-locka Today

Whether it’s a cracked seam, a leaking roof junction, or a new Dvele addition going onto historic Opa-locka masonry, we’ll give you a written price before any work starts, and a live person is here at any hour to take your call. Call (833) 510-5367 to schedule your free estimate.

Written by the team at Bradford Remodeling Co Coral Gables.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
An open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceAn open kitchen and dining area after a remodelA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Opa-locka? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Opa-locka

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch