A Bradford company - serving Coral Gables, FL
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Westview, FL

Dvele Construction in Westview, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Construction in Westview, FL

Bradford Remodeling Co Coral Gables provides independent Dvele service across Westview, FL, from full kitchen remodeling and roof repair to additions that tie a modular section into an existing concrete-block home. The one thing that sets our Dvele work apart here: Westview’s mid-century block-and-stucco housing means nearly every Dvele project is a remodel or a tie-in, not a greenfield modular install, so the transition details get the attention. We’re an independent Dvele specialist, not affiliated with or authorized by the manufacturer, and we scope each job around the structure in front of us. Call (833) 510-5367 to schedule a free estimate.

Call (833) 510-5367

Why Westview Residents Choose Us for Dvele Service

A wide opening with a new beam where the kitchen wall was removed

We know the Dvele line the way a mechanic knows a particular engine. The LUMEN series modular homes, the prefab single-family packages, the net-zero-ready modular builds, the custom floorplan units: each has its own envelope details, connection points, and finish schedule. Our technicians have up to 22 years of experience, and we’ve worked on enough of these systems to know where they tend to fail in South Florida’s humidity before an owner points to the stain.

That experience matters in Westview, where a modular panel meeting a 1960s stucco wall is the normal case rather than the exception. We source OEM-matching components for envelope and structural connection work wherever they’re still available, so the repair holds to Dvele’s specs rather than getting improvised with whatever’s at the supply house. And every project comes with a written price before any work starts, a full year’s coverage under the 365-Day Done Right Promise, and a live person answering the phone around the clock. Call (833) 510-5367 for a free estimate on your Westview service area Dvele project.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Solve in Westview

Dvele builds a good product. But modular and prefab systems meet conditions in Westview that the factory floor never simulates. These are the calls we get most:

  • Panel and envelope seams that leak moisture in South Florida’s humidity. Dvele’s factory-sealed panel joints are engineered tight, but near-constant humidity finds any gap. Westview owners notice it first as a musty smell in a back room or a brown streak at an interior wall junction after a wet summer. Caught early, the fix is re-sealing; caught late, it’s drywall and substrate work.
  • Marriage-line and modular connection joints that need re-sealing and re-flashing. Where one module meets another, or a module meets site-built structure, the joint has to hold up to Miami-Dade’s high-velocity hurricane zone (HVHZ) tie-down requirements. Original flashing and sealant often don’t. This is the work we’re asked to do most in Westview.
  • Roof-to-wall transitions on Dvele’s low-slope assemblies. These fail when the flashing and sealant used at the transition weren’t Miami-Dade NOA-listed products. An NOA is a product approval notice, and in this county the code treats it as mandatory. Outside contractors routinely install flashing that performs fine elsewhere but won’t pass inspection here.
  • Transport-set module interfaces that settle or rack slightly. After years in service, crane-set modules can shift at their connection points. The result is hairline drywall cracks and doors that stick in one season and free up in another. Many owners assume foundation trouble; usually it’s the joint.
  • Roof membrane wear on flat and low-slope assemblies. Westview has a lot of flat and low-slope roofs, and Dvele’s low-slope details are engineered for it, but sun and standing water take a toll. Repair usually beats replacement when the failure is localized to seams or flashing.

Dvele Service in Westview: What Local Conditions Mean for Your Equipment

A room opened to the studs with new wiring and plumbing

Westview’s housing stock is dominated by mid-century concrete-block single-family homes, built from roughly the 1950s through the 1970s, many with flat or low-slope roofs and additions tacked on over the decades. That changes the Dvele conversation entirely. Most Dvele projects here are remodels and additions tying a modular or prefab element into existing block-and-stucco walls, not fresh modular installs on open lots. And that transition detail, not the factory build, is where Miami-Dade HVHZ compliance most often gets missed. A contractor from outside the county can deliver a clean factory envelope and still fail inspection at the tie-in, because the flashing and sealant at the wall junction never carried the correct NOA-listed products. In a neighborhood this tightly packed, that’s not a paperwork problem; it’s a water-intrusion problem that shows up in your living room the next rainy season. When we scope a Dvele project in Westview, the tie-in gets specified line by line, with the approval numbers in the written scope.

In a Westview home where a Dvele modular section meets an original concrete-block addition, the typical call starts with a musty smell or a water stain at the marriage-line wall after a rainy season. The usual cause is failed sealant and under-specified flashing at that joint, which never carried the correct Miami-Dade NOA-listed products. A qualified local pro opens the seam, verifies the tie-downs, re-flashes and re-seals to HVHZ standards, and addresses interior moisture damage before it spreads.

Dvele Models & Products We Service in Westview

We handle service and construction work tied to the Dvele LUMEN series modular homes, the prefab single-family home packages, the net-zero-ready modular builds, and custom floorplan modular units. That covers envelope repair, roof-to-wall transitions, marriage-line joints, and additions that join a module to site-built structure, along with the kitchen, bath, and finish work that follows.

On parts: envelope and structural connection components should match Dvele’s OEM specifications wherever those components are still available, because the approval and engineering documentation depends on it. Finish and trim items can safely use quality aftermarket equivalents without compromising the envelope. We don’t keep Dvele parts in local stock; we verify what each job needs against the model and source it before the crew mobilizes, so there’s no waiting on the driveway for a part. See our general Dvele service page for the full range of work.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Service Pricing in Westview

A framer checking new wall framing on a home addition

Every Dvele project in Westview gets a written price before a single tool comes out. Here’s what the work typically runs in this market:

Service Typical Price Range
Roof Repair $400 – $1800
Roof Replacement $8000 – $20000
Metal Roof Installation $15000 – $40000
Home Addition $45000 – $130000
Full Kitchen Remodeling $14000 – $45000
Full Bathroom Remodeling $9000 – $28000

What drives cost is scope at the tie-in, whether the work requires engineered remediation at a compromised module interface, and material choices. A seam re-flash and re-seal sits at the low end; an addition joining a Dvele module to existing block walls sits at the high end. Your free estimate includes a written line-item scope, the specified products with their approval numbers, and a fixed price that doesn’t move at the door. Call (833) 510-5367 for an exact quote on your Westview project.

Serving Westview, FL – Our Local Coverage Area

We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Dvele Construction in Westview

Service Areas Near Westview

We also work on Dvele construction in Pinewood, Gladeview, Brownsville, Coral Gables, and Miami. Same humidity, same HVHZ rules, often the same tie-in detail. If you’re just outside Westview, call and we’ll confirm coverage before we schedule.

Book Your Dvele Service in Westview Today

Whether it’s a seam that’s leaking, a roof that needs attention, or an addition tying a Dvele module into block walls, we’ll put the scope and the price in writing before work starts, with the approval numbers on the page. Call (833) 510-5367 for a free estimate in Westview.

Written by the team at Bradford Remodeling Co Coral Gables.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Westview? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Westview

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch