







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose ViewLux Construction
Bradford Remodeling Co Coral Gables provides independent ViewLux construction, repair and installation service across Coral Gables – kitchens, cabinet refacing and frameless glass shower enclosures. What makes our ViewLux work different is repetition: we set the leveling, shim and reveal tolerances that frameless European cabinetry demands, and we back every completed project with the 365-Day Done Right Promise and a written price before work starts. To schedule a free estimate, call (833) 510-5367.
ViewLux is a European-style frameless and minimal-frame cabinetry and glazing brand with a narrow dealer footprint. Few crews install it often enough to know its habits. We do. We’re also straight with you about what we are: Bradford Remodeling Co Coral Gables is an independent ViewLux service provider. We are not affiliated with or authorized by ViewLux, and nothing here should be read that way. The familiarity you’re buying is ours, learned on real Coral Gables installations, not a manufacturer certificate.
Why Trust Bradford Remodeling Co Coral Gables for Your ViewLux Construction?

Frameless cabinetry punishes sloppy setup. With a face frame, the frame hides a millimeter of drift. With ViewLux’s minimal-frame and handle-less runs, nothing hides it. Our technicians have up to 22 years of experience, and on ViewLux work that experience goes into three things: getting the boxes plumb before a single door goes on, using correct-pattern hardware so the push-to-open and pivot mechanisms hold their adjustment, and leaving the reveal lines even across the full run.
Parts matter. ViewLux’s proprietary hinges, pivots, runners and edge trim are best sourced as genuine ViewLux components, and we order them to the pattern the cabinet was built for. Standard concealed hinges and shelf hardware can often be matched with quality aftermarket equivalents at lower cost, and we’ll tell you when that’s the honest call. We won’t tell you we stock parts locally, because we don’t – each job’s hardware is sourced to spec.
Warranty-safe practice is part of the discipline. We don’t cut frames, drill fronts or alter hardware in ways that would give a manufacturer grounds to deny a claim. Everything is in writing before we start: the written price, the scope, and the guarantee. The 365-Day Done Right Promise means if the work fails within a year of completion, we come back and correct it at no charge. Coral Gables homeowners get a signed written guarantee in hand at close, the same as every Bradford project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in Coral Gables
These are the failures that actually show up on ViewLux installations in Coral Gables, and why they happen.
- Edge chipping and micro-scuffs on gloss lacquer fronts. High-use corners take the first hit, usually within a few years, where the lacquer or foil edge has no protection. It’s a finish-aging reality, not abuse, and it’s the single most common call we get on ViewLux gloss runs.
- Handle-less push-to-open drawers that no longer close flush. The latch mechanisms lose adjustment and drift out of alignment until a drawer sits proud of the run. Often it’s one latch; sometimes it’s every drawer in a stack that was never quite leveled.
- Glass door pivot and slide hardware that sags or drags. On ViewLux pivoting and sliding interior glass systems, carrier wheels wear over time and panels catch at the frame. Left alone, the drag loads the pivot and the sag gets worse.
- Uneven reveal lines and doors rubbing the frame. Cabinet boxes mounted against an out-of-tolerance or unlevel wall produce exactly this on frameless runs, where there’s no frame to absorb the error. In Coral Gables, with a lot of 1920s – 1940s Mediterranean Revival and Mission-style homes, walls that are not truly plumb are the norm rather than the exception.
- Boxes and hardware affected by humidity and salt air. Coral Gables sits close to Biscayne Bay, and the combination of high humidity, salt air and intense UV is hard on cabinet boxes, glass seals and the metal in pivot and slide hardware. Water-damaged boxes are the one case where replacement usually beats repair.
ViewLux Parts & Our Repair-vs-Replace Approach

We source ViewLux’s proprietary hinges, pivots, runners and edge trim as genuine ViewLux components, ordered to the pattern the cabinet was built for. Standard concealed hinges and shelf hardware we can often match with quality aftermarket equivalents, which keeps the cost down without compromising how the door hangs. We don’t claim to stock ViewLux parts locally – hardware is sourced per job.
Repair versus replace is a judgment call, and we make it honestly. Where a single damaged gloss or matte front can be replaced as a matched door, that’s the cheaper, correct answer, and it preserves the rest of the run. Full replacement only makes sense when the boxes are water-damaged or the hardware system is obsolete and no correct-pattern parts exist. We’ll tell you which one you’re facing before you commit to a written price. Call (833) 510-5367 for an exact quote – estimates are free.
Our ViewLux Service Process – Step by Step
- 1
Diagnosis. We check the boxes for plumb and level, test every latch, pivot and runner, and look at the finish wear at high-traffic corners. You get a written scope and a written price before any work begins.
- 2
Repair or install. On repairs, we re-level and re-shim the boxes, replace the affected latch and runner hardware with correct-pattern parts, and match damaged fronts as single replacement doors. On new installation, we set boxes plumb and shimmed first, so the covers and fronts land with even reveal lines.
- 3
Test. Every drawer opens and closes flush; every glass panel runs without catching; every front sits true. We adjust on the spot, not the next trip.
- 4
Warranty. We hand over a clean site, the documented scope and the signed 365-Day Done Right Promise. If the work fails inside a year, we return and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Coral Gables
We work on ViewLux handle-less gloss lacquer base and wall cabinet runs; ViewLux matte-finish slab door cabinets with integrated aluminum bar pulls; ViewLux pivoting and sliding interior glass door systems; and ViewLux frameless mirrored and pivot closet systems. Within those families, three sub-services come up most often in Coral Gables: full kitchen remodeling, cabinet installation and refacing, and frameless glass shower enclosures. Kitchen work runs $14,000 – $45,000, cabinet installation $4,000 – $13,000, and walk-in shower installation $4,500 – $12,000.
We Also Service These Brands
ViewLux is one brand in a broader set we install and service. Bradford Remodeling Co Coral Gables also works with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among others. That range matters when a ViewLux repair meets an older kitchen or a mixed-brand spec – we can match what’s already there instead of forcing a single-brand answer.
FAQs – ViewLux Construction Service in Coral Gables

Is Bradford Remodeling Co Coral Gables authorized by ViewLux? No. We are an independent ViewLux service provider, not an authorized dealer or affiliated with ViewLux. Our expertise comes from repeated installation and repair work, not manufacturer authorization, and we never present it otherwise.
Do you use genuine ViewLux/OEM parts? Yes for proprietary components – ViewLux hinges, pivots, runners and edge trim are sourced as genuine ViewLux parts. Standard concealed hinges and shelf hardware can often be matched with quality aftermarket equivalents, and we’ll tell you when that’s the right call for your cabinet.
How long does ViewLux service take? A hardware and alignment repair is usually done in a single visit once the correct parts arrive. Front replacement and refacing depend on how many doors are involved and the lead time on matched fronts. Your written scope sets the timeline before work begins. Call (833) 510-5367 for a free estimate.
What ViewLux models/series do you cover? Handle-less gloss lacquer base and wall runs; matte-finish slab door cabinets with integrated aluminum bar pulls; pivoting and sliding interior glass door systems; and frameless mirrored and pivot closet systems.
Will service void my ViewLux warranty? Not when the work is done to spec. We avoid cutting frames, drilling fronts or altering hardware in ways that would give a manufacturer grounds to deny a claim, and our own 365-Day Done Right Promise covers the labor for a full year.
How much does ViewLux construction cost in Coral Gables? The table below gives current Coral Gables ranges. Every job gets a written price before work starts, with no numbers that move at the door.
| Service | Typical Range in Coral Gables |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Call (833) 510-5367 for an exact quote – estimates are free.
Book Your ViewLux Service in Coral Gables, FL
If handle-less drawers won’t close flush, a gloss front has chipped at the corner, or a glass panel catches the frame, call (833) 510-5367. We’ll diagnose it, put the price and scope in writing, and schedule your free estimate. A live person answers the phone, day or night.
Written by the team at Bradford Remodeling Co Coral Gables.












