







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Therma-Tru Construction
Bradford Remodeling Co Coral Gables provides independent Therma-Tru construction service in Coral Gables: we diagnose and repair failing entry doors and door systems, and we install new Therma-Tru slabs, frames, and glass lites when a door is past saving. What sets our Therma-Tru work apart is that we’re not tied to one product. We source the correct Fiber-Classic or Smooth-Star slab, the right sill, and OEM glass for your specific opening, not whatever package is easiest to sell. We are an independent Therma-Tru service provider and are not affiliated with or authorized by Therma-Tru. Call (833) 510-5367 and a live person answers, any hour.
Why Trust Bradford Remodeling Co Coral Gables for Your Therma-Tru Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent in the door openings of Coral Gables homes: Mediterranean Revival entries with original Dade County pine jambs, 1950s ranches with tight stoops, and newer builds where the rough opening was framed a little out of square. They know how a Fiber-Classic bottom rail behaves after a decade of irrigation splash and salt air, and they know the difference between a sill that needs new sealant and one that needs replacing.
On parts, we work warranty-safe. Where the frame is sound, we use genuine Therma-Tru replacement sills, sweeps, hinges, weatherstrip, and glass lites rather than aftermarket kits that won’t match the sill geometry. We don’t claim to stock parts locally, and we won’t pretend a part is in hand until it is. Before any work starts you get a written price, and every completed project carries the 365-Day Done Right Promise: if the door or the work around it fails within a full year, we come back and correct it at no charge. That’s The Garrison Standard, and it applies to a sill reseal the same way it applies to a full door system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Coral Gables
Coral Gables sits between Biscayne Bay salt air and hurricane-season wind-driven rain, and that combination finds every weak point in a door system. These are the Therma-Tru issues we see most:
- Fiberglass slab edge delamination and a swollen bottom rail. The bottom rail of a Fiber-Classic or Smooth-Star slab sits closest to the splash line from rain and irrigation. Over years, moisture wicks into the edge, the fiberglass skin separates from the core, and the door stops closing flush. This is the single most common reason these doors get replaced rather than repaired.
- Sill and threshold leaks. When the adjustable sill or the sill pan sealant line fails, water tracks under the door and stains interior flooring. Coral Gables’ wind-driven rain pushes water sideways against thresholds that handle a straight-down downpour fine, which is why so many of these leaks only show up during a storm.
- Warped or sagging slabs and striker misalignment. Humidity cycling – dry season to wet season and back – moves a wood jamb, hinge screws pull out, and the slab drops until the latch won’t catch. A door that “suddenly” stopped latching usually started drifting months earlier.
- Fogged or leaking insulated glass lites. The glazing seals in door glass frames break down under intense UV. Once the seal goes, moisture gets between the panes, the lite fogs from the inside, and it can’t be cleaned out.
- Sticking and binding in multi-point locking systems. Therma-Tru door systems with multi-point locking bind when the slab and frame are out of alignment. Homeowners often force the handle, which wears the mechanism. The real fix is aligning the door, not replacing the lock.
Therma-Tru Parts & Our Repair-vs-Replace Approach

Genuine Therma-Tru replacement sills, sweeps, hinges, weatherstrip, and glass lites are what we reach for when the frame is sound. Aftermarket weatherstrip and sweep kits are acceptable as a short-term stop, but they rarely match Therma-Tru sill geometry, so the seal doesn’t last a Coral Gables rainy season. We source parts per job to fit your exact model and opening; we don’t claim to keep them in local stock.
The repair-or-replace call is honest. A door with a solid frame and an intact slab is usually worth repairing. A delaminated bottom rail or a rotted jamb typically points to replacing the full door system, because patching it just delays the same failure. You’ll get that verdict in writing before we touch anything. Call (833) 510-5367 for a free estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We identify the model and series, check jamb plumb and hinge alignment, test the sill and sweep, and trace any leak to its actual source – sill sealant, sill pan, or glazing.
- 2
Written scope and price. You get a line-item price before work starts: what gets repaired, what gets replaced, and which parts are OEM Therma-Tru.
- 3
Repair or install. We pull the door where needed, inspect the rough opening and sill pan, replace sill and sweep, re-flash and re-seal, or set a new slab and frame if the rail has delaminated.
- 4
Test. We cycle the door, check the latch and multi-point lock, confirm a clean seal at the sweep and threshold, and water-test the sill area where the diagnosis warrants it.
- 5
Warranty in hand. Clean site, documented scope, and your signed 365-Day Done Right Promise before we leave.
A typical Therma-Tru call starts with water staining on the interior floor or a door that no longer latches cleanly, usually traced to a failed sill sealant line or a fiberglass bottom rail that has taken on moisture. The usual fix is to pull the door, inspect the rough opening and sill pan, replace the sill and sweep, re-flash and re-seal, or set a new slab and frame if the rail has delaminated. Qualified local pros also check jamb plumb and hinge alignment, since humidity-driven movement in South Florida openings is often what started the problem.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Coral Gables

We service and install across the Therma-Tru lines you’ll find on Coral Gables homes:
- Fiber-Classic Collection fiberglass entry doors
- Smooth-Star smooth fiberglass door series
- Professionals Series and Classic-Craft premium fiberglass doors
- Therma-Tru door systems with multi-point locking
- Glass lites and door glass frames
- Sills, sweeps, hinges, and weatherstrip for these lines
Whatever the specific model, the process is the same: identify it, source the right part, and put the price and the guarantee in writing.
We Also Service These Brands
Therma-Tru is one line in a documented roster. We also work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among others. That matters on a door job that turns into a bigger remodel: the same crew that squares away your entry can carry the kitchen or bath work to the same written standard. One set of specs, one guarantee.
FAQs – Therma-Tru Construction Service in Coral Gables
Once the bottom rail has swelled and the fiberglass skin has delaminated, the door usually needs replacing rather than repairing. Moisture has already compromised the core, and patching the edge won’t stop it from failing again. We inspect the rail and the jamb before recommending, and you get the verdict and price in writing. Call (833) 510-5367 for a free estimate.
The leak is almost always a failed sill sealant line or a sill pan that wasn’t flashed correctly, and Coral Gables’ wind-driven rain drives water sideways into that gap. The fix is re-flashing and re-sealing the sill, or replacing an adjustable sill that’s past its seal. Call (833) 510-5367 to schedule a free estimate.
Yes, in most cases the glass lite can be replaced on its own while the door slab and frame stay in place. Once the glazing seal breaks, moisture gets between the panes and can’t be cleaned out, so the lite itself has to come out. Call (833) 510-5367 for a free estimate on the replacement.
Fiberglass holds up better than wood in Coral Gables humidity overall, since it doesn’t rot or take on moisture the way a wood slab does. The weak point is the bottom rail edge, where splash and wind-driven rain can still cause delamination over time. Proper sill sealing and a durable sweep make the biggest difference. Call (833) 510-5367 for a free estimate.
Check the jamb for rot and plumb, the rough opening and sill pan for water damage, and whether the home’s Mediterranean Revival entry falls under Board of Architects review, which can add 60 – 90 days to exterior work in much of Coral Gables. We assess all of that before quoting. Call (833) 510-5367 to schedule a free estimate.
Door repair and full-system replacement vary by scope; the table below covers the most common projects we price in Coral Gables. Every one comes with a written price before work starts and the 365-Day Done Right Promise. Call (833) 510-5367 for an exact quote – estimates are free.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
Door-system work is quoted line by line once we’ve seen the opening. Coral Gables’ Board of Architects review, when it applies to exterior changes, can affect timeline and scope, so we factor it into the price up front.
Written by the team at Bradford Remodeling Co Coral Gables.
Book Your Therma-Tru Service in Coral Gables, FL
If your Therma-Tru door is leaking, sticking, fogging, or delaminating, get a written price before anyone touches it. Bradford Remodeling Co Coral Gables answers the phone 24/7 with a live person, sends background-checked, uniformed technicians, and backs every job with the 365-Day Done Right Promise. Call (833) 510-5367 for a free estimate.












