







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Bathroom Remodeling: The Coral Gables Owner’s Guide
Bathroom remodeling for a Mighty Buildings home in Coral Gables typically runs $9,000 to $28,000 installed, depending on the module footprint, panel interfaces, and fixture scope. Smaller module bathrooms come in at $5,000 to $12,000. We’re an independent contractor and not affiliated with Mighty Buildings, so we work from the panel documentation in your home rather than a factory script.
Owners rarely call us about a single “part” failing in a Mighty Buildings bathroom. What they describe is usually the reveal behind the failure: a tub surround that keeps letting go along the panel seam, a shower pan that flexes and cracks at the drain, or a vanity cabinet that separated at the wall because the substrate behind it is a composite panel and not drywall. Coral Gables humidity and the salt air that rides in from Biscayne Bay make all three worse, since moisture that stays trapped against a factory panel has nowhere to evaporate. That’s the pattern we see in Mighty Buildings bathrooms across Coral Gables: the components are sound, but the seam and fastener details that tie them together are where things give up.
Which Mighty Buildings Models This Applies To
Mighty Buildings built its line around a panelized system, and the bathroom assemblies across model variants share some fixture clearances and framing dimensions but not all of them. We’ve worked on enough of these to know that the cabinet-to-wall interface, the shower surround mounting plane, and the vanity plumbing rough-in are where the specs drift between production runs. Before we quote, we pull the model and serial documentation the owner has (usually a sticker inside a cabinet or on the panel edge and a section in the owner packet) and cross-check it against what’s actually installed on the wall. If the paperwork is gone, we measure. Where a factory match is available, we use it. Where it’s discontinued or back-ordered, we use instrument-grade equivalents from KraftMaid, Cambria, Silestone, Kohler, and Moen – brand-matched to the surrounding materials and documented on the written quote so the homeowner can verify the spec themselves. All of that is spelled out in the written price before the first tool comes out, per The Garrison Standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Bathroom Remodeling Is Failing
- Caulk and grout joints opening along the panel seam. Composite wall panels expand and contract differently than tile, and the sealant at the joint takes the stress. When it lets go, water finds that path first.
- Shower pan that flexes underfoot or cracks around the drain. A pan set on a substrate that isn’t fully bedded will move, and the drain connection is where it shows up. Small cracks at the drain collar become leaks behind the panel in a season.
- Vanity cabinet separating at the wall or sagging off plumb. Factory cabinets need blocking at the studs behind the module panel, not just into the panel face. When the attachment relies on the panel instead of the frame, the cabinet pulls away over a few seasons of loaded drawers.
- Mildew that keeps coming back in the same corner or ceiling span. Exhaust running low or venting into an interstitial space, not outdoors. This shows up in Coral Gables homes where the bathroom ceiling is close to the roof deck.
- Soft floor at the threshold or around the toilet flange. A leak that has been running behind the wall or under the pan long enough to reach the subfloor. By the time the floor feels soft, the damage is behind the finish.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Every price below is the written price before work starts, in Coral Gables dollars, with the parts, labor, and disposal included.
- Full bathroom remodel, Mighty Buildings compatible: $9,000 to $28,000
- Small bathroom remodel: $5,000 to $12,000
- Walk-in shower installation: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Shower replacement: $3,000 to $8,500
- Bathroom vanity installation: $800 to $3,000
The range is driven by three things: whether the module panel needs modification or repair before fixtures go back on, the fixture tier the homeowner chooses, and whether the plumbing rough-in lines up with the factory assembly or needs to move. All work carries the 365-Day Done Right Promise – if it fails within the first year, we come back and correct it at no charge. Written scope, written price, signed guarantee in the owner’s hand at close.
DIY or Call Us?
An owner can safely do a few things: re-caulk a panel seam with the right sealant, check that the shower pan doesn’t flex underfoot, confirm the bathroom exhaust actually blows air outdoors, and pull the owner packet to identify the model. What you should not do – and this is one place we’re firm – is open the wall behind the shower, lift a pan that’s set on a substrate, or move the plumbing rough-in. That’s where a panelized system differs from stick-built work: cutting into a factory panel or the framing behind it can compromise the module itself, and the wrong anchor or the wrong cut leaves water with a path you can’t see. Same for the electrical at the vanity or the exhaust fan: live wiring in a wet location is a stop, not a lesson. If any of that describes your situation in Coral Gables, call us.
FAQs

Most Mighty Buildings bathrooms in Coral Gables should carry ten to fifteen years before the first real remodel, though the sealant and grout along panel seams need attention every few years – the humidity and salt air here shorten that interval compared to drier climates. Freshwater leaks and exhaust failures are what pull that timeline down; take care of those and the assembly holds up.
Sometimes. A vanity that’s pulling away from the wall can often be re-secured with proper blocking into the studs behind the panel, and a shower pan with a minor drain-collar issue can often be repaired if the leak hasn’t reached the framing. Once a pan is bedded wrong or a panel is water-logged, though, replacement is the honest answer. We look at the actual condition before quoting, and the written price tells you which path we recommend.
Most of our Coral Gables bathroom remodels run two to four weeks on site, depending on whether the module panel needs repair and how long the fixture order takes to arrive. A single-fixture swap like a vanity can be a one-day job. Every project schedule is written on the quote so there are no moving dates. Call (833) 510-5367 for a free estimate that includes the timeline.
We start with the owner’s model and serial documentation, cross-check against what’s installed, and source a factory-match component wherever one is available. Where the original is discontinued, we spec a documented equivalent from a name-brand manufacturer – Kohler, Moen, KraftMaid, and the like – so the material has a manufacturer warranty backing Bradford’s own 365-Day Done Right Promise. Nothing goes on the truck without a spec on the written quote first.
If you’re in Coral Gables and your Mighty Buildings bathroom is showing the signs above, call (833) 510-5367 for a free estimate. A live person answers 24/7 – no voicemail, no callback queue. We’ll walk through the model documentation with you, put a written price in your hands before we touch anything, and hand you a signed guarantee at close.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












