







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Kitchen Remodeling: The Coral Gables Owner’s Guide
A Mighty Buildings kitchen remodel in Coral Gables typically runs $14,000 to $45,000 installed, with cabinet installation at $4,000 – $13,000, countertop installation at $2,000 – $6,500, and backsplash work at $800 – $2,500. We handle Mighty Buildings-compatible kitchen work here in Coral Gables with a written price before any work starts, backed by our 365-Day Done Right Promise. If a part or surface has failed, you’ll know it by the swelling at a cabinet base, the hairline crack that keeps returning along a countertop seam, or a backsplash grout line that won’t stay put.
Here’s what most Coral Gables owners run into: the failure rarely announces itself. It shows up as a soft spot behind the dishwasher, a door that won’t sit flush after a humid summer, or a countertop edge that has lifted a fraction of an inch and no longer seals. Mighty Buildings homes are built to tight, documented specifications, so matching the replacement correctly matters more than swapping in the closest thing at a big-box store.
We’re an independent remodeling contractor, not affiliated with Mighty Buildings. What we do is read the specs, order to them, and install so the next failure is far down the road.
Which Mighty Buildings Models This Applies To

Mighty Buildings builds panelized and 3D-printed homes that differ from conventional stick-built construction in ways that directly affect kitchen work. The wall assemblies are engineered to specific dimensions, and openings for cabinets, plumbing rough-in, and electrical are placed at documented locations during manufacturing. That’s the compatibility gotcha: a standard 24-inch base cabinet depth assumes a wall face you may not have. In these homes the interior finish layer can sit a bit proud or recessed depending on the panel joint, so a cabinet order placed without measuring the actual finished wall face is the number-one reason doors and drawers won’t close right once installed.
Before we order anything, we confirm three things:
- Model and panel documentation. The home’s spec sheet or panel labels identify the wall system and finish layers. If you don’t have them, we measure the as-built conditions instead.
- Finished wall face, not framing. Cabinet depth and filler sizing depend on the finished surface, including any panel joint offset.
- Rough-in locations. Plumbing and electrical stub-outs are fixed in a panelized build. Cabinet layout has to respect where they actually sit.
On OEM versus aftermarket: for Mighty Buildings kitchens, there usually isn’t a proprietary cabinet or countertop to buy back from the manufacturer. The cabinetry, surfaces, and fixtures come from established brands, and that’s good news. We work with KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, and Kohler and Moen fixtures, among others. Those are documented products with manufacturer specs and warranties, so a “matching” replacement means matching the panel geometry and rough-in, not hunting down a bespoke part. Cambria and Silestone both publish slab dimensions and edge profiles that we order to directly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Kitchen Remodeling Is Failing
These are the failures we see most often in Coral Gables kitchens, and each one has a cause worth naming before anyone starts swinging a hammer.
- Cabinet doors and drawers that won’t stay aligned. In a panelized home, hinges anchor into the finish layer, and over time a hinge that pulled slightly loose from that layer lets the door sag. It’s a mounting-depth problem more than a hinge problem.
- Countertop seams cracking or lifting. South Florida’s humidity swings expand and contract the substrate beneath a countertop. If the seam wasn’t sealed with the right flexible adhesive, it opens up within a couple of seasons and lets moisture in.
- Backsplash grout that won’t hold. Coral Gables homes see plenty of humidity, and grout over a panel joint with any movement will crack repeatedly. The fix is a flexible sealant at that joint, not more grout.
- Soft or swollen cabinet base panels. A slow leak behind the dishwasher or under the sink wicks into the base panel, and MDF-based material swells and never recovers. Catch it early and the cabinet box survives; wait and it’s a replacement.
- Countertop edge that lifted from the cabinet. Poor adhesion or movement between the counter and the cabinet frame shows up as a visible gap along the edge, and that gap is a moisture path.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are installed prices for Coral Gables, covering materials, labor, and cleanup. We give you one written number before work begins, and it doesn’t move at the door.
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range within each line: cabinet count and door style, countertop material and edge profile, whether the layout has to shift to respect fixed rough-in locations, and whether any panel joint needs a furring layer to sit flush. Parts and labor are itemized separately on the written quote, so you can see what you’re paying for material and what you’re paying for installation.
Every completed project carries our 365-Day Done Right Promise: a written, full-year guarantee. If the work fails inside that window, we come back and correct it at no charge. That covers the installation itself, not manufacturer defects in a product covered by its own warranty, and we say so in writing so there’s no ambiguity.
DIY or Call Us?
There’s honest work you can do yourself here, and there’s a line where DIY makes the problem worse or puts you at risk.
Safe to check on your own: measuring the finished wall face for a cabinet order, identifying a leak behind the dishwasher early, cleaning and inspecting a backsplash seal, and noting where a door or drawer is sagging. Those are observation tasks.
Where DIY goes wrong:
- Removing and re-seating a countertop. Slab stone is heavy and brittle; a two-person lift with the wrong technique cracks seams and can cause a serious injury. This is a two-trained-technician job with proper handling equipment.
- Cutting into a panelized wall assembly. Any cut into a Mighty Buildings wall system needs to respect the panel structure and hidden rough-in. Cutting blind risks hitting electrical or plumbing.
- Electrical and plumbing re-routing. Fixed rough-in means moving a stub-out is a licensed trade’s job, not a weekend project.
If you’re not sure which side of that line your issue falls on, call us at (833) 510-5367 and we’ll tell you straight, free of charge. If it’s a job you can handle, we’ll say so.
FAQs

A well-installed kitchen in a Coral Gables home realistically lasts 15 to 20 years for cabinetry and countertops, though South Florida humidity means seams and sealant need attention every few years. The installation quality matters more than the material lifespan on paper: a properly sealed countertop seam and a correctly anchored hinge will outlast a cheaper install that skipped those steps. Call (833) 510-5367 for an exact quote, estimates are free.
Often, yes. A sagging cabinet door is usually a hinge adjustment, a cracked backsplash joint is a flexible-sealant repair, and a small countertop edge lift can be re-adhered. Full replacement makes sense when a cabinet base has swollen from water or a stone seam has cracked through the slab. We’ll tell you which it is after a look, and we won’t push a replacement you don’t need. Call (833) 510-5367 to schedule your free estimate.
A cabinet or countertop swap in a Mighty Buildings kitchen typically runs two to five days of on-site work once materials are in hand, depending on scope and whether panel-joint furring is needed. A full kitchen remodel takes longer, and we give you a written schedule with the written price so you know the timeline up front. Call (833) 510-5367 for a real estimate.
We order to the home’s documented specifications, measuring the as-built wall face and rough-in locations rather than guessing from a catalog. Cabinetry comes from KraftMaid and Wellborn, surfaces from Cambria, Caesarstone, or Silestone, and fixtures from Kohler and Moen, all documented products with manufacturer specs and warranties behind them. Every price is written before work starts. Call (833) 510-5367 to schedule your free estimate.
If your Mighty Buildings kitchen in Coral Gables has a failing part or a remodel you’ve been putting off, give us a call at (833) 510-5367. A live person answers day or night, we’ll put a written price in front of you before anything starts, and when we’re done the site will be clean and the signed guarantee will be in your hand. Estimates are free.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












